金属氧化物压敏电阻规格与选型指南

需积分: 9 76 浏览量更新于2024-07-16 收藏 1.84MB PDF 举报

"压敏电阻规格书.pdf" 压敏电阻，也称为金属氧化物变阻器（MOVs），是电子设备中广泛使用的过电压保护元件。这些电阻器具有非线性的伏安特性，即在正常工作电压下，其阻值很高，而在电压超过其阈值时，阻值会显著下降，从而能够分流过电压，保护电路免受损害。World Products Inc. 提供的压敏电阻经过了多项安全认证，包括UL、CSA和VDE，符合IEC61051-2标准，并且部分型号还满足ANSI/IEEE C62.11加速老化测试要求。此外，生产工厂通过了ISO和TS16949认证，确保了产品的高质量和一致性。这些压敏电阻符合EIA标准的带状包装，并具备良好的可焊性，符合MIL STD标准。对于环保要求，World Products Inc. 提供符合RoHS指令2002/95/EC的产品，其中(-N)后缀表示符合RoHS标准，对铅、汞、六价铬、多溴联苯(PBB)、多溴二苯醚(PBDE)以及镉的含量限制在极低水平。产品一致性通过极其严格的品质控制和统计过程得以保持，采用在线自动测试设备进行100%的检验。World Products Inc. 提供多种类型的压敏电阻，几乎涵盖了所有常见的金属氧化物变阻器类型，方便设计师准确选择和设计。这些电阻具有极低的漏电流水平和出色的浪涌处理能力，得益于专有的配方技术。在物理特性方面，环氧树脂的性能得到严格控制，确保了尺寸的一致性和焊接性的改善。World Products Inc. 的压敏电阻设计灵活，能够快速响应客户对于严格应用的需求。规格书中详细列出了各种系列的电气特性、尺寸、引脚修改选项以及峰值脉冲和降额曲线等信息，如DS系列、ES系列、VZ25RS系列、VZ32KW系列、VZ34单双系列、VZ40系列和VZ53系列等，为用户提供全面的技术参数参考。 World Products Inc. 的压敏电阻是设计者和工程师在保护电子设备免受过电压损害时的重要选择，其高性能、多样性和环保特性使其成为可靠的安全保障。

Metal Oxide VaristOrs

WORLD PRODUCTS INC. 19654 Eighth Street East, Sonoma, CA 95476 | Phone (707) 996-5201 | Fax (707) 996-3380 | www.worldproducts.com Rev. 9.9

Metal Oxide Varistors | 9

Standard Dimensions and Lead Modiﬁcation Options (continued)

E Max Dimensions (For Standard Epoxy)

Dimensions are in mm (inches)

10D Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

10D180K 3.8 (.15) 1.4 (.055) 10D301K 4.4 (.17) 2.5 (.1)

10D220K 4.0 (.16) 1.5 (.06) 10D331K 4.6 (.18) 2.5 (.1)

10D270K 4.2 (.165) 1.6 (.063) 10D361K 4.9 (.19) 2.7 (.1)

10D330K 4.3 (.17) 1.8 (.07) 10D391K 5.0 (.2) 2.9 (.11)

10D390K 4.4 (.17) 1.6 (.063) 10D431K 5.2 (.2) 3.1 (.12)

10D470K 4.4 (.17) 1.7 (.067) 10D471K 5.4 (.21) 3.6 (.14)

10D560K 4.4 (.17) 1.8 (.07) 10D511K 5.5 (.22) *3.4 (.13)

10D680K 4.6 (.18) 2.1 (.083) 10D561K 5.8 (.23) *3.5 (.138)

10D820K 3.8 (.15) 1.4 (.055) 10D621K 6.1 (.24) *4.2 (.165)

10D101K 3.8 (.15) 1.4 (.055) 10D681K 6.4 (.25) *4.6 (.18)

10D121K 4.0 (.16) 1.5 (.06) 10D751K 6.7 (.26) *5.0 (.197)

10D151K 4.2 (.165) 1.5 (.06) 10D781K 6.9 (.27) *5.0 (.197)

10D181K 4.2 (.165) 1.6 (.063) 10D821K 7.1 (.28) *5.4 (.2)

10D201K 4.2 (.165) 1.8 (.07) 10D911K 7.5 (.3) *5.9 (.23)

10D221K 4.1 (.16) 1.8 (.07) 10D102K 7.6 (.3) *6.4 (.25)

10D241K 4.2 (.165) 2.0 (.08) 10D112K 7.8 (.31) *7.0 (.275)

10D271K 4.3 (.17) 2.2 (.087)

14D Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

14D180K 3.9 (.15) 1.4 (.055) 14D301K 4.4 (.17) 2.6 (.1)

14D220K 4.1 (.16) 1.5 (.06) 14D331K 4.6 (.18) 2.6 (.1)

14D270K 4.3 (.17) 1.7 (.067) 14D361K 4.9 (.19) 2.8 (.11)

14D330K 4.5 (.18) 1.9 (.075) 14D391K 5.0 (.2) 3.0 (.12)

14D390K 4.5 (.18) 1.7 (.067) 14D431K 5.2 (.2) 3.2 (.126)

14D470K 4.3 (.17) 1.8 (.07) 14D471K 5.4 (.21) 3.8 (.15)

14D560K 4.5 (.18) 2.0 (.08) 14D511K 5.5 (.22) *3.4 (.13)

14D680K 4.7 (.185) 2.2 (.087) 14D561K 5.8 (.23) *3.5 (.138)

14D820K 3.8 (.15) 1.4 (.055) 14D621K 6.1 (.24) *4.2 (.165)

14D101K 3.8 (.15) 1.5 (.06) 14D681K 6.4 (.25) *4.7 (.185)

14D121K 4.0 (.16) 1.5 (.06) 14D751K 6.7 (.26) *5.1 (.2)

14D151K 4.2 (.165) 1.5 (.06) 14D781K 6.9 (.27) *5.1 (.2)

14D181K 4.4 (.17) 1.7 (.067) 14D821K 7.1 (.28) *5.5 (.22)

14D201K 4.6 (.18) 1.9 (.075) 14D911K 7.5 (.3) *6.0 (.24)

14D221K 4.1 (.16) 1.9 (.075) 14D102K 7.6 (.3) *6.5 (.255)

14D241K 4.2 (.165) 2.1 (.083) 14D112K 8.0 (.31) *7.2 (.28)

14D271K 4.3 (.17) 2.2 (.087)

* Bulk parts for 320VAC and larger come standard with inline crimp (as referenced at beginning of “Standard Dimensions and Lead Modication

Options” section ) for straight disk seating on PC boards. Therefore, “a” dimension is not applicable. If 320VAC and larger size are required without

in-line crimp, please reference “Part Number System” position # (8) and add “N” and reference “a” dimensions (for off-set) above.

E max

Metal Oxide VaristOrs

WORLD PRODUCTS INC. 19654 Eighth Street East, Sonoma, CA 95476 | Phone (707) 996-5201 | Fax (707) 996-3380 | www.worldproducts.com Rev. 9.9

10 | Metal Oxide Varistors

Standard Dimensions and Lead Modiﬁcation Options (continued)

E Max Dimensions (For Standard Epoxy)

Dimensions are in mm (inches)

20D Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

20D180K 4.3 (.17) 1.5 (.06) 20D301K 5.0 (.2) 2.6 (.1)

20D220K 4.5 (.18) 1.6 (.063) 20D331K 5.0 (.2) 2.7 (.1)

20D270K 4.7 (.185) 1.8 (.07) 20D361K 5.4 (.21) 2.9 (.11)

20D330K 4.9 (.19) 2.1 (.083) 20D391K 5.5 (.22) 3.1 (.12)

20D390K 5.1 (.2) 2.1 (.083) 20D431K 5.7 (.22) 3.3 (.13)

20D470K 5.3 (.21) 2.2 (.087) 20D471K 5.5 (.22) 4.0 (.157)

20D560K 5.5 (.22) 2.2 (.087) 20D511K 5.7 (.22) *3.4 (.13)

20D680K 5.7 (.22) 2.4 (.094) 20D561K 5.9 (.23) *3.8 (.15)

20D820K 4.3 (.17) 1.5 (.06) 20D621K 6.2 (.24) *4.5 (.18)

20D101K 4.3 (.17) 1.6 (.063) 20D681K 6.5 (.26) *4.8 (.19)

20D121K 4.4 (.17) 1.6 (.063) 20D751K 6.8 (.27) *5.2 (.2)

20D151K 4.6 (.18) 1.6 (.063) 20D781K 7.0 (.275) *5.4 (.2)

20D181K 4.6 (.18) 1.8 (.07) 20D821K 7.2 (.28) *5.6 (.22)

20D201K 4.7 (.185) 2.0 (.08) 20D911K 7.5 (.3) *6.5 (.255)

20D221K 4.8 (.19) 2.0 (.08) 20D102K 7.9 (.31) *6.6 (.26)

20D241K 4.9 (.19) 2.2 (.087) 20D112K 8.4 (.33) *7.3 (.287)

20D271K 4.9 (.19) 2.3 (.09)

25D Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

25D181K 4.8 (.19) 2.2 (.087) 25D511K 6.8 (.27) *3.5 (.138)

25D201K 5.0 (.2) 2.2 (.087) 25D561K 7.0 (.275) *3.9 (.15)

25D221K 5.0 (.2) 2.2 (.087) 25D621K 7.4 (.29) *4.8 (.19)

25D241K 5.3 (.21) 2.4 (.094) 25D681K 7.5 (.29) *5.0 (.197)

25D271K 5.5 (.22) 2.5 (.1) 25D751K 7.6 (.30) *5.4 (.2)

25D301K 5.6 (.22) 2.7 (.1) 25D781K 8.0 (.31) *5.5 (.22)

25D331K 5.9 (.23) 2.8 (.11) 25D821K 8.2 (.32) *5.8 (.23)

25D361K 5.9 (.23) 3.0 (.12) 25D911K 8.2 (.32) *7.0 (.275)

25D391K 6.0 (.24) 3.3 (.13) 25D102K 8.8 (.35) *7.2 (.28)

25D431K 6.5 (.256) 3.5 (.138) 25D112K 9.4 (.37) *7.4 (.29)

25D471K 6.5 (.26) 5.0 (.197)

* Bulk parts for 320VAC and larger come standard with inline crimp (as referenced at beginning of “Standard Dimensions and Lead Modication

Options” section ) for straight disk seating on PC boards. Therefore, “a” dimension is not applicable. If 320VAC and larger size are required without

in-line crimp, please reference “Part Number System” position # (8) and add “N” and reference “a” dimensions (for off-set) above.

E max

Metal Oxide VaristOrs

WORLD PRODUCTS INC. 19654 Eighth Street East, Sonoma, CA 95476 | Phone (707) 996-5201 | Fax (707) 996-3380 | www.worldproducts.com Rev. 9.9

Metal Oxide Varistors | 11

Standard Dimensions and Lead Modiﬁcation Options (continued)

E Max Dimensions (For Standard Epoxy)

Dimensions are in mm (inches)

25R Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

25R181KBS 5.75 (.23) 2.55 (.10) 25R511KBS 7.20 (.28) 4.00 (.158)

25R201KBS 5.92 (.23) 2.72 (.11) 25R561KBS 7.50 (.30) 4.30 (.17)

25R221KBS 6.08 (.24) 2.88 (.11) 25R621KBS 7.85 (.30) 4.65 (.20)

25R241KBS 6.25 (.25) 3.05 (.12) 25R681KBS 8.20 (.32) 5.00 (.20)

25R271KBS 5.80 (.23) 2.60 (.10) 25R751KBS 8.28 (.32) 5.08 (.20)

25R301KBS 5.98 (.23) 2.78 (.11) 25R781KBS 8.47 (.33) 5.27 (.20)

25R331KBS 6.15 (.24) 2.95 (.12) 25R821KBS 8.70 (.34) 5.50 (.21)

25R361KBS 6.35 (.25) 3.15 (.12) 25R911KBS 9.18 (.36) 5.98 (.23)

25R391KBS 6.50 (.25) 3.30 (.13) 25R102KBS 9.66 (.39) 6.46 (.25)

25R431KBS 6.75 (.27) 3.55 (.14) 25R112KBS 10.20 (.40) 7.00 (.27)

25R471KBS 7.00 (.28) 3.80 (.15) 25R122KBS 10.70 (.42) 7.50 (.30)

32D Series

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

Style

E Max

mm (in)

Off-set Dimension (a)

±1 (±0.04) mm (in)

32D201KW 5.6 (.22) 2.6 (.1) 32D621KW 7.9 (.31) *4.9 (.19)

32D221KW 5.7 (.22) 2.7 (.11) 32D681KW 8.1 (.32) *5.1 (.2)

32D241KW 5.8 (.23) 2.8 (.11) 32D751KW 8.5 (.33) *5.5 (.216)

32D271KW 5.9 (.23) 2.9 (.11) 32D781KW 8.7 (.34) *5.7 (.22)

32D331KW 6.3 (.25) 3.3 (.13) 32D821KW 9.0 (.35) *6.0 (.236)

32D361KW 6.5 (.255) 3.5 (.137) 32D911KW 9.4 (.37) *6.4 (.25)

32D391KW 6.6 (.26) 3.6 (.14) 32D951KW 9.8 (.39) *6.7 (.26)

32D431KW 6.8 (.27) 3.8 (.15) 32D102KW 10.0 (.39) *7.0 (.275)

32D471KW 6.9 (.27) 3.9 (.15) 32D112KW 10.5 (.41) *7.5 (.295)

32D511KW 7.3 (.29) *4.3 (.17) 32D122KW 11.0 (.43) *8.0 (.31)

32D561KW 7.3 (.29) *4.3 (.17) 32D152KW 12.5 (.49) *9.5 (.37)

* Bulk parts for 320VAC and larger come standard with inline crimp (as referenced at beginning of “Standard Dimensions and Lead Modication

Options” section ) for straight disk seating on PC boards. Therefore, “a” dimension is not applicable. If 320VAC and larger size are required without

in-line crimp, please reference “Part Number System” position # (8) and add “N” and reference “a” dimensions (for off-set) above.

E max

剩余64页未读，继续阅读

amingda

粉丝: 0
资源: 4

金属氧化物压敏电阻规格与选型指南

C111189_压敏电阻_14D471K_规格书_HEL(鸿志)压敏电阻规格书.PDF

压敏电阻_10D471K_规格书_RUILON(瑞隆源)压敏电阻规格书.PDF

GRACEKRVVVaristor压敏电阻规格书.pdf

C2839518_压敏电阻_10D471K_规格书_SURGING(绍鑫)压敏电阻规格书.PDF

C8760_压敏电阻_10D471K_规格书_RUILON(瑞隆源)压敏电阻规格书.PDF

C78346_压敏电阻_471KD10_规格书_BRIGHTKING(君耀电子)压敏电阻规格书.PDF

C28756_压敏电阻_07D471K_规格书_RUILON(瑞隆源)压敏电阻规格书.PDF

C524030_压敏电阻_CNR-07D471K_规格书_CNR(舜全)压敏电阻规格书.PDF

国巨电阻电容规格书.pdf

贴片压敏电阻2220封装参数型号规格书大全.pdf

最新资源