波龙FormControl英文手册：机床在线测量系统

需积分: 10 201 浏览量更新于2024-07-18 收藏 3.44MB PDF 举报

"波龙FormControl用户英文手册，是波龙在线测量系统软件的编程手册，主要应用于机床在线测量。用户手册详细介绍了如何使用FormControl，适用于XP Service Pack 3、Vista和Windows 7操作系统，需要支持3D图形（OpenGL）的PC，并且要求安装Windows Internet Explorer 7或以上版本。软件的正常运行依赖于随附的USB-Dongle，如果丢失，不仅会导致软件许可证的丢失，客户还需重新购买完整版的软件许可证。" 在波龙FormControl用户手册中，详细阐述了硬件和软件的要求，以确保软件能够有效地在机床在线测量过程中运行。首先，硬件需求明确指出需要一台具有3D图形支持（OpenGL）的个人计算机（PC）。这通常是由于软件可能涉及到复杂的数据可视化和图形处理，因此对图形处理能力有较高要求。操作系统方面，FormControl兼容Windows XP Service Pack 3、Vista以及Windows 7，这些都是当时较为流行的商业操作系统，能够为用户提供稳定的运行环境。手册还强调了对于Windows Internet Explorer 7的依赖，这可能是因为软件的部分功能或更新服务需要通过浏览器来实现，或者是使用了IE的某些特定技术。用户需要确保安装了指定版本或更高版本的浏览器，以保证软件的正常运行和更新。关键的一点是，FormControl的使用依赖于一个USB-Dongle，这是一个物理的授权设备，存储了程序和配置的重要数据。USB-Dongle通过其序列号进行识别，一旦丢失，意味着软件许可证的丧失。这意味着用户必须再次购买完整的软件许可证，因为所有配置和许可信息都存储在这个小设备上，它的安全性对于软件的正常使用至关重要。波龙-诺沃泰斯特（Blum-Novotest GmbH）是这个生产计量系统的提供商，其联系方式也在手册中给出，便于用户在遇到问题时寻求技术支持或售后服务。波龙FormControl是一款专为机床在线测量设计的软件，用户手册详细介绍了其运行环境和关键硬件要求，特别是USB-Dongle的使用和管理，突显了软件许可证管理和数据安全的重要性。对于任何使用该系统的操作员和IT专业人员，理解和遵循这些指南都是确保系统有效、安全运行的关键。

Technical Modifications Reserved 308000010_V410_EN.docx Version V4.10







by Blum-Novotest 2010

Page:

27.08.2012

4.1 Toolbars

As shown in the previous screenshot the main menu consist of a number of different buttons. They are

combined in so called toolbars. To adjust the user interface to the individual preferences these toolbars can

be switched on or off. As used to other windows applications it is possible to configure them. For this

advanced users right click in the empty area beneath the buttons. Here only the functions Point filter and

View are described. The other functions are described later on.

General

This option switches the display of the buttons of the „general“ group on or off. The toolbar contains essential

function for setting up a project or to open existing ones.

Project

This option switches the display of the buttons of the „project“ group on or off. In this toolbar you can find the

functions for setting the measuring points or for adding structural elements like groups to the project

structure.

Execute

This option switches the buttons of the “execution” group on or off.

View

This option switches the display of the buttons of the „view“ group on or off. With them the view on the part

can be changed.

Orientation

With this option the orientation toolbar containing the functions to rotate or mirror projects can be activated or

de-activated.

4.1.1 Point Filter

This option is used for activating/de-activating the filter mechanism.

A typical FormControl project may contain a huge number of measuring points. To get a clear representation

of the project in such a situation the points can be filtered. Only the points are displayed which match the

filter conditions. For example if a project consists of more than 750 points the filter allows to select only

surface points with tolerances outside the defined limits. The filter is directly activated after entering the

conditions. The filter is quite simple to use because all possible settings can be selected out of drop down

boxes.

Type

Defines the type of measuring points which shall be displayed.

All All points will be displayed

Surface

point

Only surface points will be displayed.

Hole/boss

points

Only the points lying in holes or at bosses will be shown.

Technical Modifications Reserved 308000010_V410_EN.docx Version V4.10







by Blum-Novotest 2010

Page:

27.08.2012

Tol

With this filter condition the amount of points to be displayed can be restricted additionally.

All All points will be displayed

Inside

In case that the tolerances of the points are lying inside the given tolerances, they will

be shown.

Outside

In case that the tolerances of the points are lying outside the given tolerances, they will

be shown.

Below Display all points whose tolerances are lying below the given range.

Above Display all points whose tolerances are lying above the given range.

no Display all points which have not been measured, or which could not be measured.

Group

Complex measuring projects can be structured by group elements. According to this it is possible to select

points which are elements of a special group. If the filter conditions should be applied to all points of a

measuring task „project“ has to be selected. The drop down box lets the user select an element out of all

possible project elements.

From To

This restriction uses the number of the points.

All filter conditions are linked with the logical AND. You can read the command as follows e.g. Show all

points, whose type is surface-point and whose tolerances are lying above the allowed range with point

numbers in the range from 100 to 200.

4.1.2 Defined Views

With this option the dialog for the definition of named views can be switched on or off.

Especially in case of complex work pieces it may by helpful during the definition of the measuring points to

use several views. They can be stored under a given name for the later project work. Storing the view means

storing the active display settings like view-vector, filter criterions and other display options like marker on/off,

spectrum on/off etc.

Tip: Activate all display options during setting up the project even if you do not have defined a single point.

All of these options are stored together with the view direction. So you will get the correct pictures inside your

protocol. Otherwise the protocol pictures will just show the points which have been measured but not the

measuring results.

New

With this command a new view can be defined. A small dialog appears (see below) where the name of the

new view can be typed in. It is recommended to use realistic names to simplify the later handling of different

views. Pressing the OK button stores the active settings. Because of the fact that the name of the view is

used to derive some file-names the character set is restricted. So characters like / \ ? * : [ ] can not be used.

Activating the checkbox below indicates that this view should be included into a protocol print.

Delete

Deletes the named view out of the list.

All views are handled on the project level so that changes can be made inside the project properties.

Technical Modifications Reserved 308000010_V410_EN.docx Version V4.10







by Blum-Novotest 2010

Page:

27.08.2012

4.1.3 Status Bar

The status bar gives additional information to points or commands. To activate it, just click into the checkbox.

4.2 Change the view on the part

All functions described above could be used to activate/de-activate special elements of the FormControl

screen but they are not changing the way the model is displayed. The functions described in this section of

the chapter are used to change the way, the work piece is displayed on the screen in an interactive way.

4.2.1 Rotate

This function allows to rotate the model by moving the mouse so that all areas can be seen for setting the

measuring points. If this function is active the orientation of the model will be changed if the mouse is moved

while keeping the left mouse button pressed. In this case the cursor appears in a form of a rotating arrow.

4.2.2 Pan

With this function the view on the part can be moved. The coordinates remain of course unchanged. Just

move the mouse while keeping the left mouse button pressed. To show that this function is active, the cursor

appears in form of a hand.

4.2.3 Zoom dynamic

It is often very useful to be able to zoom into details of the model to define the measuring points. With this

function the zoom can be done dynamically. The size of the part changes while moving the mouse up and

down keeping the left mouse button pressed. The cursor form of a ± sign shows that this function is active.

4.2.4 Zoom Window

In difference to the dynamic zoom mentioned above this function allows to specify a window as a definition of

the zoom area. The content of the window will then be displayed in a maximum size. The defining window is

drawn using the left mouse button.

In case that this function is active the cursor gets the form of a small cross combined with a magnifying

glass.

4.2.5 Zoom to Extents

After several zoom operations this function will lead back to a display of the complete part. The part is

displayed so that the complete part is visible on the screen even if it is rotated.

4.2.6 Standard View

Sometimes it is useful to have quick access to standard view settings. So the view from top, bottom, left right

etc. can be activated with a single mouse click.

剩余106页未读，继续阅读

kelvinmeng

粉丝: 0
资源: 3

波龙FormControl英文手册：机床在线测量系统

波龙FormControl中文用户手册：TC50测头在线自动测量软件使用指南

Oracle Hyperion Financial Management 11.1.2.4 用户手册 (中文版)

波龙P87.0634激光对刀仪全面安装与维护手册

波龙FormControl用户中文手册

如何利用波龙FormControl软件进行在线自动测量系统的设置和基本操作？请提供详细步骤。

在使用波龙FormControl软件进行在线自动测量时，如何进行测头的配置以及对测量数据进行分析？

如何设置波龙FormControl软件以进行高精度的在线自动测量？请详细说明软件的配置和操作流程。

波龙激光对刀仪硬件手册

海波龙planning关系表

江波龙msata 128G 量产工具

最新资源