IEEE论文投稿指南：准备 Transactions 和 Journal 论文
需积分: 50 82 浏览量
更新于2024-09-13
收藏 777KB PDF 举报
"IEEE投稿通用模板，为准备向IEEE Transactions和Journals提交论文的作者提供指导。"
在准备向IEEE Transactions和Journals提交论文时，遵循正确的格式和规范至关重要。这篇文档提供了具体的指导，适用于使用Microsoft Word 6.0或更高版本的作者。以下是基于给定内容的关键知识点：
1. **论文标题**：论文标题应使用大写和小写字母混合的方式，而不是全大写。避免在标题中放置复杂的带有下标的小公式，但简短的公式标识元素是可以接受的（如“Nd–Fe–B”）。
2. **作者信息**：作者姓名建议使用全名，但不是必需的。作者的首字母之间需要留空格。在作者字段中，不需要提供中间名。
3. **摘要**：摘要部分应简洁明了，不包含引用文献。摘要开头不要删除与之相邻的空行，这将设定脚注位于该栏的底部。
4. **关键词**：关键词是文章主题的重要指示器，应按字母顺序列出，并用逗号隔开。你可以通过发送空白电子邮件到`keywords@ieee.org`或访问`http://www.ieee.org/organizations`获取建议的关键词列表。
除了上述要点，还有一些其他重要的注意事项：
5. **格式要求**：电子版论文文件将在IEEE进行进一步格式化。这意味着你需要提交的是一个基础版的文档，而最终的排版和格式调整会由IEEE负责。
6. **引文和参考文献**：虽然这里没有详细提及，但在正文中引用文献时，通常需要遵循特定的引用样式，例如IEEE、APA或MLA等。确保正确引用所有参考文献，并按照期刊要求的格式排列。
7. **图和表**：图和表应清晰且具有自解释性。每个图和表都需要有标题和编号，并在正文中相应位置引用。
8. **语言和风格**：论文应使用正式的学术语言，避免使用口语化或非标准的表达方式。保持一致的时态和语态。
9. **页码和页眉**：根据期刊的具体要求，可能需要在页面底部添加页码，或者在页眉处包括论文标题的缩写。
10. **版权声明**：通常在论文的开头需要包含版权声明，表明你允许论文被IEEE出版和分发。
遵循这些指导原则，可以帮助你的论文顺利通过IEEE的初步审查，并增加被接受和发表的可能性。确保仔细阅读并理解目标期刊的投稿指南，因为每个期刊可能有自己的特定要求。
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) <
1
Abstract—These instructions give you guidelines for preparing
papers for IEEE Transactions and Journals. Use this document
as a template if you are using Microsoft Word 6.0 or later.
Otherwise, use this document as an instruction set. The electronic
file of your paper will be formatted further at IEEE. Paper titles
should be written in uppercase and lowercase letters, not all
uppercase. Avoid writing long formulas with subscripts in the
title; short formulas that identify the elements are fine (e.g., "Nd–
Fe–B"). Do not write “(Invited)” in the title. Full names of
authors are preferred in the author field, but are not required.
Put a space between authors’ initials. Define all symbols used in
the abstract. Do not cite references in the abstract. Do not delete
the blank line immediately above the abstract; it sets the footnote
at the bottom of this column.
Index Terms—Enter key words or phrases in alphabetical
order, separated by commas. For a list of suggested keywords,
send a blank e-mail to keywords@ieee.org or visit
http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt
I. INTRODUCTION
HIS document is a template for Microsoft Word versions
6.0 or later. If you are reading a paper or PDF version of
this document, please download the electronic file,
TRANS-JOUR.DOC, from the IEEE Web site at
http://www.ieee.org/web/publications/authors/transjnl/index.html so
you can use it to prepare your manuscript. If you would prefer
to use LATEX, download IEEE’s LATEX style and sample
files from the same Web page. Use these LATEX files for
formatting, but please follow the instructions in TRANS-
JOUR.DOC or TRANS-JOUR.PDF.
If your paper is intended for a conference, please contact
your conference editor concerning acceptable word processor
formats for your particular conference.
This paragraph of the first footnote will contain the date on which you
submitted your paper for review. It will also contain support information,
including sponsor and financial support acknowledgment. For example, “This
work was supported in part by the U.S. Department of Commerce under Grant
BS123456”.
The next few paragraphs should contain the authors’ current affiliations,
including current address and e-mail. For example, F. A. Author is with the
National Institute of Standards and Technology, Boulder, CO 80305 USA (e-
mail: author@ boulder.nist.gov).
S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA. He
is now with the Department of Physics, Colorado State University, Fort
Collins, CO 80523 USA (e-mail: author@lamar.colostate.edu).
T. C. Author is with the Electrical Engineering Department, University of
Colorado, Boulder, CO 80309 USA, on leave from the National Research
Institute for Metals, Tsukuba, Japan (e-mail: author@nrim.go.jp).
II. GUIDELINES FOR MANUSCRIPT PREPARATION
When you open TRANS-JOUR.DOC, select “Page Layout”
from the “View” menu in the menu bar (View | Page Layout),
(these instructions assume MS 6.0. Some versions may have
alternate ways to access the same functionalities noted here).
Then, type over sections of TRANS-JOUR.DOC or cut and
paste from another document and use markup styles. The pull-
down style menu is at the left of the Formatting Toolbar at the
top of your Word window (for example, the style at this point
in the document is “Text”). Highlight a section that you want
to designate with a certain style, then select the appropriate
name on the style menu. The style will adjust your fonts and
line spacing. Do not change the font sizes or line spacing to
squeeze more text into a limited number of pages. Use italics
for emphasis; do not underline.
To insert images in Word, position the cursor at the
insertion point and either use Insert | Picture | From File or
copy the image to the Windows clipboard and then Edit | Paste
Special | Picture (with “float over text” unchecked).
IEEE will do the final formatting of your paper. If your
paper is intended for a conference, please observe the
conference page limits.
A. Abbreviations and Acronyms
Define abbreviations and acronyms the first time they are
used in the text, even after they have already been defined in
the abstract. Abbreviations such as IEEE, SI, ac, and dc do not
have to be defined. Abbreviations that incorporate periods
should not have spaces: write “C.N.R.S.,” not “C. N. R. S.”
Do not use abbreviations in the title unless they are
unavoidable (for example, “IEEE” in the title of this article).
B. Other Recommendations
Use one space after periods and colons. Hyphenate complex
modifiers: “zero-field-cooled magnetization.” Avoid dangling
participles, such as, “Using (1), the potential was calculated.”
[It is not clear who or what used (1).] Write instead, “The
potential was calculated by using (1),” or “Using (1), we
calculated the potential.”
Use a zero before decimal points: “0.25,” not “.25.” Use
“cm
3
,” not “cc.” Indicate sample dimensions as “0.1 cm × 0.2
cm,” not “0.1 × 0.2 cm
2
.” The abbreviation for “seconds” is
“s,” not “sec.” Use “Wb/m
2
” or “webers per square meter,”
not “webers/m
2
.” When expressing a range of values, write “7
to 9” or “7-9,” not “7~9.”
Preparation of Papers for IEEE TRANSACTIONS
and JOURNALS (December 2013)
First A. Author, Fellow, IEEE, Second B. Author, and Third C. Author, Jr., Member, IEEE
T
下载后可阅读完整内容，剩余8页未读，立即下载
2016-07-16 上传
2020-08-04 上传
2023-10-05 上传
2023-07-12 上传
2024-06-19 上传
2023-04-06 上传
2023-05-24 上传
2023-04-05 上传
chen_fu
- 粉丝: 4
- 资源: 3
我的内容管理
展开
最新资源
- IPQ4019 QSDK开源代码资源包发布
- 高频组电赛必备：掌握数字频率合成模块要点
- ThinkPHP开发的仿微博系统功能解析
- 掌握Objective-C并发编程：NSOperation与NSOperationQueue精讲
- Navicat160 Premium 安装教程与说明
- SpringBoot+Vue开发的休闲娱乐票务代理平台
- 数据库课程设计：实现与优化方法探讨
- 电赛高频模块攻略：掌握移相网络的关键技术
- PHP简易简历系统教程与源码分享
- Java聊天室程序设计：实现用户互动与服务器监控
- Bootstrap后台管理页面模板（纯前端实现）
- 校园订餐系统项目源码解析：深入Spring框架核心原理
- 探索Spring核心原理的JavaWeb校园管理系统源码
- ios苹果APP从开发到上架的完整流程指南
- 深入理解Spring核心原理与源码解析
- 掌握Python函数与模块使用技巧
