DMR标准协议解析与技术规范

需积分: 33 39 浏览量更新于2024-07-19 收藏 1.3MB PDF 举报

ETSI TS 102 361-1 V2.4.1 (2016-02) 是关于数字移动无线电（DMR）系统第一部分：DMR空中接口（AI）协议的技术规范。 DMR（Digital Mobile Radio）标准协议是专为专业移动无线电（PMR）设计的一种数字通信协议。这个标准由欧洲电信标准协会（ETSI）制定，旨在提高无线电通信的效率、质量和安全性。ETSITS102361-1是该标准的重要组成部分，详细规定了DMR系统的空中接口协议，即设备之间无线通信的规则和过程。该技术规范涵盖以下几个关键知识点： 1. **电磁兼容性（Electromagnetic Compatibility, EMC）**：DMR系统必须在复杂的电磁环境中运行，因此协议要求设备应具备良好的电磁兼容性，以避免与其他电子设备相互干扰。 2. **频谱管理（Radio Spectrum Matters）**：DMR标准遵循严格的频谱使用规定，确保在有限的无线电频谱资源内高效利用，减少频率冲突。 3. **数字技术**：DMR采用数字编码技术，相比于传统的模拟无线电，提供了更清晰的语音质量、更高的数据传输速率和更好的抗干扰能力。 4. **空中接口协议（Air Interface Protocol）**：这部分详细定义了DMR设备之间的无线通信协议，包括信道分配、调制解调技术、错误检测与纠正机制、呼叫建立和释放流程等。 5. **技术规格**：规范中包含了具体的性能指标，如信号带宽、发射功率、接收灵敏度等，以确保设备间的一致性和互操作性。 6. **关键词**：文档中的关键词“digital”和“PMR”强调了DMR的数字化特性以及它在专业移动通信领域的应用。 7. **版本管理**：文档可能有电子版和印刷版，但以特定网络驱动器上存储的PDF打印版为准。任何对内容的修改都需要ETSI的书面授权。 DMR标准协议的实施对于专业无线电通信领域具有重要意义，它促进了公共安全、交通、能源等行业的通信效率和可靠性。同时，通过标准化，DMR设备能够跨厂商实现互操作性，降低了用户的设备采购和维护成本。

ETSI

ETSI TS 102 361

1 V2.4.1 (2016

02)

SAP Service Access Point

NOTE: Where a network provides a service.

SAPID SAP Identifier

SARQ Selective Automatic Repeat reQuest

SB Single Burst

SDL Specification and Description Language

SF Supplementary Flag

SFID Standards FID

SLCO Short Link Control Opcode

SMS Short Message Service

SP Source Port

SYNC SYNChronization

T_xxxx Layer 2 timer

NOTE: As defined in clause F.1.

TACT TDMA Access Channel Type

TC TDMA Channel

TCP Transmission Control Protocol

TDD Time Division Duplex

TDMA Time Division Multiple Access

Trellis_Dibit output Dibit from Trellis code

TX Transmitted bit

UAB UDT Appended Blocks

UTF Unicode Transformation Format

UDP User Datagram Protocol

UDT Unified Data Transport

UDTO UDT Opcode

U-plane User plane

VF Vocoder Frame

VI (receiver) Variable Indicator

V_Sync TDMA Voice burst Sync

VS Vocoder Socket bit

WU Wake Up

4 Overview

4.0 Overview introduction

The present document describes a Digital Mobile Radio (DMR) system for Tier I, Tier II and Tier III products which

employs a Time Division Multiple Access (TDMA) technology with a 2-slot TDMA solution and RF carrier bandwidth

of 12,5 kHz (see note 1).

NOTE 1: DMR system for Tier I products employs a continuous transmission variation of the above mentioned

technology.

The present document describes the Physical Layer (PL) and the Data Link Layer (DLL) of the DMR Air Interface

(AI). Radio equipments (fixed, mobile or portable) which conform to the present document shall be interoperable at the

Air Interface with equipment from other manufacturers.

Slot formats, field definitions, and timing are defined for voice traffic, data traffic, and control signalling. An overview

of the TDMA timing is provided followed by the basic slot formats and bit definitions. This is followed by definitions

of the payload and control fields. Finally, the details of the modulation and timing constraints are specified.

ETSI

ETSI TS 102 361

1 V2.4.1 (2016

)

The present document will not provide the specification or operational detail for system implementations which include

but are not limited to trunking, roaming, network management, vocoder, security, data, subsystems interfaces and data

between private and public switched telephone networks. It describes only the appropriate access requirements

compatible with the Air Interface.

NOTE 2: The DMR standard consists of a multi-part deliverable, which will be referred to in the present document

if needed.

4.1 Protocol architecture

4.1.0 Protocol architecture - Introduction

The purpose of this clause is to provide a model where the different functions and processes are identified and allocated

to different layers in the DMR protocol stack.

The protocol stack in this clause and all other related clauses describe and specify the interfaces, but these stacks do not

imply or restrict any implementation.

The DMR protocol architecture which is defined herein follows the generic layered structure, which is accepted for

reference description and specification of layered communication architectures.

The DMR standard defines the protocols for the following 3 layered model as shown in figure 4.1.

The base of the protocol stack is the Physical Layer (PL) which is the layer 1.

The Data Link Layer (DLL), which is the layer 2, shall handle sharing of the medium by a number of users. At the

DLL, the protocol stack shall be divided vertically into two parts, the User plane (U-plane), for transporting information

without addressing capability (e.g. voice), and the Control plane (C-plane) for signalling information, both control and

data, with addressing capability, as illustrated by figure 4.1.

NOTE 1: It is appropriate to bear in mind the different requirements of C-plane and U-plane information. C-plane

information needs only a discrete (or non-continuous) physical link to pass information although it needs

a continuous virtual link to support the service. This may also be called signalling or packet mode service.

Acknowledgements may or may not be requested. U-plane information, on the other hand, requires a

regular physical link to be available so that a constant delay service can be supported. This may also be

called circuit mode service.

NOTE 2: The DLL identified in figure 4.1 may be further sub-divided in the air interface protocol to separate the

functionality of Medium Access Control (MAC) and Logical Link Control (LLC), which is often

performed in radio air interface protocols due to the specialized nature of these two tasks. Such separation

is not presented in the present document and is implementation specific. It is further implementation

specific if layer 2 at U-plane offers only MAC for the service.

The Call Control Layer (CCL), which is layer 3, lies in the C-plane and is responsible for control of the call (addressing,

facilities, etc.), provides the services supported by DMR, and supports Short Data and Packet Data service. U-plane

access at layer 2 (DLL) supports voice service which is available in DMR. The Control Layer and the facilities and

services offered by DMR are described in ETSI TS 102 361-2 [5]. The Short Data and Packet Data Protocol offered by

DMR are described in ETSI TS 102 361-3 [12].

ETSI

ETSI TS 102 361

1 V2.4.1 (2016

02)

4.1.2 Air Interface Data Link Layer (layer 2)

The Air Interface layer 2 shall handle logical connections and shall hide the physical medium from the upper layers.

The Data Link Layer is described in clauses 5 to 9.

The main functions are as follows:

• channel coding (FEC, CRC);

• interleaving, de-interleaving and bit ordering;

• acknowledgement and retry mechanism;

• media access control and channel management;

• framing, superframe building and synchronization;

• burst and parameter definition;

• link addressing (source and/or destination);

• interfacing of voice applications (vocoder data) with the PL;

• data bearer services;

• exchanging signalling and/or user data with the CCL.

4.1.3 Air Interface Call Control Layer (CCL) (layer 3)

Air Interface layer 3 (CCL) is applicable only to the C-plane, and shall be an entity for the services and facilities

supported by DMR on top of the layer 2 functionality. The Call Control Layer (CCL) is described in ETSI

TS 102 361-2 [5] and may have embedded intrinsic services associated to it.

The CCL provides the following functions:

• BS activation / deactivation;

• establishing, maintaining and terminating of calls;

• individual or group call transmission and reception;

• destination addressing (DMR IDs or gateway as appropriate);

• support of intrinsic services (emergency signalling, pre-emption, late entry, etc.);

• data call control;

• announcement signalling.

4.2 DMR TDMA structure

4.2.1 Overview of burst and channel structure

The described solution is based on a 2-slot TDMA structure.

The physical resource available to the radio system is an allocation of the radio spectrum. The radio spectrum allocation

shall be partitioned into Radio Frequency (RF) carriers with each RF carrier partitioned in time into frames and

timeslots.

A DMR burst is a period of RF carrier that is modulated by a data stream. A burst therefore represents the physical

channel of a timeslot. The physical channel of a DMR subsystem is required to support the logical channels.

ETSI

ETSI TS 102 361

1 V2.4.1 (2016

02)

A logical channel is defined as a logical communication pathway between two or more parties. The logical channels

represent the interface between the protocol and the radio subsystem. The logical channels may be separated into two

categories:

• the traffic channels carrying speech or data information; and

• control channels carrying signalling.

A generalized timing diagram of exchanges between the MS and the BS is shown in figure 4.2 where the slots for the

two TDMA physical channels are labelled channel "1" and "2". Inbound transmission is labelled "MS TX" and

outbound transmission is labelled "BS TX". Figure 4.2 is intended to illustrate a number of signalling features and

timing relationships and does not represent a particular scenario.

NOTE: The example timing in figure 4.2 applies to a two frequency BS.

Figure 4.2: TDMA timing overview

Key points illustrated by the figure 4.2 include:

• While the BS is actively transmitting, the outbound channel is continuously transmitted, even if there is no

information to send. Transmission on the inbound channel is stopped when an MS has no information to

transmit.

• The inbound channel has an unused guard time between bursts to allow Power Amplifier (PA) ramping and

propagation delay.

• The outbound channel has a Common Announcement Channel (CACH) between bursts for traffic channel

management (framing and access) as well as low speed signalling.

• Bursts have either a synchronization pattern or an embedded signalling field located in the centre of the burst.

Placing the embedded signalling in the middle of a burst allows time for a transmitting MS to optionally

transition to the outbound channel and recover Reverse Channel (RC) information.

Other key points, summarized below but not limited to, are as follows:

• The centre of the inbound and outbound bursts shall be time aligned.

• The channel 1 and 2 bursts in the inbound channel are offset 30 ms in time from the channel 1 and 2 bursts in

the outbound channel. This number scheme allows a single channel identifier field in the outbound CACH to

use the same channel number when referring to the inbound and outbound channels.

• Different SYNC patterns are used in voice bursts and data bursts to allow the receiver to differentiate between

them. Different SYNC patterns are used for inbound and outbound channels to help the receiver reject

co-channel interference.

11111122222212

11111122222221

MS TX

BS TX

Time

TDMA burst

(30 ms)

TDMA frame

(60 ms)

Guard time

CACH SYNC or

embedded signalling

111111222222121111112222221211111122222212

111111222222211111112222222111111122222221

MS TX

BS TX

TimeTime

TDMA burst

(30 ms)

TDMA frame

(60 ms)

Guard timeGuard time

CACHCACH SYNC or

embedded signalling

SYNC or

embedded signalling

剩余176页未读，继续阅读

yinzhiqing

粉丝: 28
资源: 20

DMR标准协议解析与技术规范

数字对讲机DMR协议标准中文版

DMR协议最新标准

DMR标准协议中文版

DMR标准协议（2014英文版361，362）

DMR协议标准

DMR协议实现

DMR数字对讲机通信标准协议

DMR.rar_dmr_dmr hyt_dmr pdf_dmr协议_对讲机

基于DMR通信协议的信道编解码研究

DMR 标准 part4

最新资源