给一个modbus TCP/IP通信实例
时间: 2023-11-25 18:29:29 浏览: 134
好的,这里为您提供一个modbus TCP/IP通信实例:
假设有一台PLC(可编程逻辑控制器)和一台PC机,需要进行数据通信。具体步骤如下:
1. 在PLC上设置modbus协议通信参数,如:IP地址、通信端口、数据地址等;
2. 在PC机上安装modbus TCP/IP通信软件,如ModScan、QModMaster等;
3. 在通信软件中设置modbus协议通信参数,如:IP地址、通信端口、数据地址等;
4. 在PLC上写入要发送的数据,在通信软件上读取数据即可完成数据通信。
相关问题
modbus rtu/tcp通讯实例c#(附源码)网盘下载
modbus是一种通信协议,常用于工业自动化领域中的设备之间的数据传输。在实际应用中,可以使用C语言编写程序来实现modbus RTU和modbus TCP通信。
modbus RTU通信示例中,可以先设置串口参数,如波特率、数据位等。然后使用串口读写函数来与modbus设备进行通信。例如,可以使用C语言中的open、read和write函数来打开串口、读取数据和写入数据。
以下是一个modbus RTU通信实例的C代码:
```
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
int main() {
int fd;
struct termios serial;
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
if (fd == -1) {
perror("open");
return -1;
}
memset(&serial, 0, sizeof(serial));
serial.c_iflag = 0;
serial.c_oflag = 0;
serial.c_cflag = CS8 | CREAD | CLOCAL;
serial.c_lflag = 0;
serial.c_cc[VMIN] = 1;
serial.c_cc[VTIME] = 5;
cfsetospeed(&serial, B9600);
cfsetispeed(&serial, B9600);
if (tcsetattr(fd, TCSANOW, &serial) == -1) {
perror("tcsetattr");
return -1;
}
// 使用read和write函数与modbus设备进行通信,具体的读写操作需要根据modbus协议进行解析和封装。
// ...
close(fd);
return 0;
}
```
而modbus TCP通信则是在基于TCP/IP的网络中实现的,需要使用套接字编程来实现。以下是一个modbus TCP通信实例的C代码:
```
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <unistd.h>
int main() {
int sockfd;
struct sockaddr_in serveraddr;
sockfd = socket(AF_INET, SOCK_STREAM, 0);
if (sockfd == -1) {
perror("socket");
return -1;
}
memset(&serveraddr, 0, sizeof(serveraddr));
serveraddr.sin_family = AF_INET;
serveraddr.sin_port = htons(502);
inet_pton(AF_INET, "192.168.1.1", &(serveraddr.sin_addr));
if (connect(sockfd, (struct sockaddr *)&serveraddr, sizeof(serveraddr)) == -1) {
perror("connect");
return -1;
}
// 使用send和recv函数与modbus设备进行通信,具体的读写操作需要根据modbus协议进行解析和封装。
// ...
close(sockfd);
return 0;
}
```
以上是实现modbus RTU和modbus TCP通信的简单示例,具体的读写操作和数据解析需要根据实际需求和modbus协议进行相应的处理。
modbus tcp实例
以下是一个 Modbus TCP 的实例:
1. 假设我们有一个 Modbus TCP 从设备,它的 IP 地址为 192.168.1.100,Modbus 设备地址为 1。
2. 我们想要从 Modbus TCP 从设备中读取寄存器地址为 40001 的数据。
3. 我们需要使用一个 Modbus TCP 主设备(例如 PC 或 PLC)来与从设备通信。主设备的 IP 地址为 192.168.1.10。
4. 我们需要使用 Modbus TCP 协议进行通信。Modbus TCP 协议使用 TCP/IP 协议作为底层传输协议,并使用 502 端口号。
5. 我们需要使用 Modbus TCP 主设备的软件来发送读取命令。该命令应该包括以下内容:
- 从设备的 IP 地址(192.168.1.100)
- 从设备的 Modbus 设备地址(1)
- 读取寄存器地址(40001)
- 读取的寄存器数量(1)
6. 从设备将响应读取命令,并将所请求的数据发送回 Modbus TCP 主设备。
7. 主设备将读取到的数据用于后续的处理。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)