stm32接收一个值进入中断3次
时间: 2024-01-26 09:01:41 浏览: 37
您可以使用STM32的外部中断功能来实现接收一个值进入中断3次的需求。下面是一个简单的示例代码,假设您使用的是STM32Cube HAL库:
```c
#include "stm32f4xx_hal.h"
// 定义计数器变量
uint32_t interruptCount = 0;
// 中断回调函数
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
// 检查中断引脚
if (GPIO_Pin == GPIO_PIN_0) // 假设使用GPIO_Pin_0作为中断引脚
{
// 增加计数器
interruptCount++;
// 检查计数器是否达到3次
if (interruptCount >= 3)
{
// 执行您的操作
// ...
// 重置计数器
interruptCount = 0;
}
}
}
int main(void)
{
// 初始化HAL库
HAL_Init();
// 配置外部中断引脚
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = GPIO_PIN_0; // 假设使用GPIO_Pin_0作为中断引脚
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; // 上升沿触发中断
GPIO_InitStruct.Pull = GPIO_PULLDOWN; // 下拉电阻
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); // 假设使用GPIOA端口
// 启用外部中断线
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
while (1)
{
// 主循环代码
// ...
}
}
// 中断处理函数
void EXTI0_IRQHandler(void)
{
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0); // 假设使用GPIO_Pin_0作为中断引脚
}
```
需要注意的是,以上代码是一个简单示例,您可能需要根据实际情况进行修改。同时,中断触发条件、中断引脚的配置以及中断处理函数的实现等都需要根据您的具体需求进行调整。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)