11:50:31.339863 IP (tos 0x0, ttl 58, id 16559, offset 0, flags [DF], proto TCP (6), length 52) 10.3.3.120.11543 > 10.90.20.51.8443: Flags [S], cksum 0x3f8e (correct), seq 3995848015, win 64240, options [mss 1200,nop,wscale 8,nop,nop,sackOK], length 0 0x0000: 4500 0034 40af 4000 3a06 d40d 0a03 0378 E..4@.@.:......x 0x0010: 0a5a 1433 2d17 20fb ee2b cd4f 0000 0000 .Z.3-....+.O.... 0x0020: 8002 faf0 3f8e 0000 0204 04b0 0103 0308 ....?........... 0x0030: 0101 0402 ....
时间: 2024-02-14 17:21:42 浏览: 21
这是一条TCP连接建立的数据包。以下是对这条数据包的解释:
- `(tos 0x0, ttl 58, id 16559, offset 0, flags [DF], proto TCP (6), length 52)`:IP数据包的一些参数,其中 `proto TCP` 表示这是一个TCP协议的数据包。
- `10.3.3.120.11543 > 10.90.20.51.8443`:源IP地址为 `10.3.3.120` 的 `11543` 端口向目标IP地址为 `10.90.20.51` 的 `8443` 端口发送数据包。
- `Flags [S]`:标志位,表示这是一个SYN(同步)数据包。
- `cksum 0x3f8e (correct)`:数据包校验和,用于检测数据包是否损坏。
- `seq 3995848015`:序列号,表示这个数据包的序列号。
- `win 64240`:窗口大小,表示发送方还能发送多少数据。
- `options [mss 1200,nop,wscale 8,nop,nop,sackOK]`:选项字段,包含了一些扩展信息,如最大分段大小(MSS)、窗口缩放因子(WS)等。
- `length 0`:数据包长度,表示这个数据包的长度。
需要注意的是,这条数据包仅供参考,具体含义还需要结合上下文来分析。
相关问题
..\l610\l610_tencent_firmware.c(603): warning: #223-D: function "tos_mail_q_post" declared implicitly
这个警告信息意味着在代码中调用了一个函数,但是该函数的声明在该文件中没有被显式地声明。这通常是因为函数的声明被放在了其他文件中或者没有被正确包含。为了解决这个问题,你需要确保该函数的声明已经被包含在文件中,或者在文件中显式地声明该函数。你可以使用头文件包含方式来包含函数的声明,比如:
```
#include "tos_mail_q.h"
```
如果该头文件已经包含了该函数的声明,则可以直接调用该函数。否则,你需要在文件中显式地声明该函数,比如:
```
void tos_mail_q_post(tos_mail_q_t *q, void *msg, uint32_t timeout);
```
经过TCP/IP协议栈发送802.1Q报文
要经过TCP/IP协议栈发送802.1Q报文,需要在数据包中添加802.1Q VLAN标签,并将其发送到网络接口。以下是一个简单的示例程序,演示如何使用TCP/IP协议栈发送带有802.1Q VLAN标签的数据包:
```c++
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <arpa/inet.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/tcp.h>
#include <netinet/udp.h>
#include <netinet/ip_icmp.h>
#include <linux/if_packet.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
int main()
{
int sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
if (sock < 0) {
perror("socket");
exit(1);
}
char ifname[IFNAMSIZ] = "eth0";
struct ifreq ifr;
strncpy(ifr.ifr_name, ifname, IFNAMSIZ - 1);
if (ioctl(sock, SIOCGIFINDEX, &ifr) < 0) {
perror("ioctl");
exit(1);
}
struct sockaddr_ll addr;
memset(&addr, 0, sizeof(addr));
addr.sll_family = AF_PACKET;
addr.sll_ifindex = ifr.ifr_ifindex;
// 构造802.1Q VLAN标签
struct vlan_tag {
uint16_t tci;
uint16_t ether_type;
} __attribute__((packed));
struct vlan_tag vlan;
vlan.tci = htons(0x100);
vlan.ether_type = htons(ETH_P_IP);
// 构造IP数据包
char ip_packet[ETH_FRAME_LEN];
struct iphdr *iph = (struct iphdr *)ip_packet;
iph->version = 4;
iph->ihl = 5;
iph->tos = 0;
iph->tot_len = htons(sizeof(struct iphdr) + sizeof(struct udphdr));
iph->id = htons(0);
iph->frag_off = htons(0);
iph->ttl = 64;
iph->protocol = IPPROTO_UDP;
iph->check = htons(0);
iph->saddr = inet_addr("192.168.1.100");
iph->daddr = inet_addr("192.168.1.1");
// 构造UDP数据包
char udp_packet[ETH_FRAME_LEN];
struct udphdr *udph = (struct udphdr *)udp_packet;
udph->source = htons(1234);
udph->dest = htons(5678);
udph->len = htons(sizeof(struct udphdr));
udph->check = htons(0);
// 将IP头和UDP数据拷贝到数据包中
memcpy(ip_packet + sizeof(struct iphdr), udph, sizeof(struct udphdr));
// 将802.1Q VLAN标签和IP/UDP数据拷贝到数据包中
char packet[ETH_FRAME_LEN];
memcpy(packet, "\xff\xff\xff\xff\xff\xff", ETH_ALEN);
memcpy(packet + ETH_ALEN, "\x00\x11\x22\x33\x44\x55", ETH_ALEN);
memcpy(packet + 2 * ETH_ALEN, &vlan, sizeof(struct vlan_tag));
memcpy(packet + 2 * ETH_ALEN + sizeof(struct vlan_tag), ip_packet, sizeof(struct iphdr) + sizeof(struct udphdr));
// 发送数据包
if (sendto(sock, packet, 2 * ETH_ALEN + sizeof(struct vlan_tag) + sizeof(struct iphdr) + sizeof(struct udphdr), 0, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("sendto");
exit(1);
}
close(sock);
return 0;
}
```
该程序使用socket API创建了一个PF_PACKET类型的socket,并将其绑定到网络接口上。然后,程序构造了一个带有802.1Q VLAN标签的IP/UDP数据包,并将其封装成一个以太网帧。在构造802.1Q VLAN标签时,程序使用了vlan_tag结构体来定义标签格式,并将其添加到数据包的头部。最后,程序调用sendto函数将数据包发送到目标MAC地址。