温度与显示结果的关系 输入的温度"temperature<=10 ℃" 显示"有点冷" 输入的温度"10℃<temperature<=25 ℃"显示"有点冷" 输入的温度"25℃<temperature<=35℃ "显示"有点冷" 输入的温度"temperature>35℃" 显示"有点冷" 用python的if-else结构编写
时间: 2023-05-30 17:04:18 浏览: 55
temperature = float(input("请输入温度:"))
if temperature <= 10:
print("有点冷")
elif 10 < temperature <= 25:
print("有点冷")
elif 25 < temperature <= 35:
print("有点冷")
else:
print("有点冷")
相关问题
输入华氏温度F,利用公式C=5/9*(F-32)转换成摄氏温度C, 根据转换结果C的不同值按以下要求给出相应的提示: C>40时,打印"Hot" 30<C<=40时,打印"Warm" 20<C<=30时,打印"Room Temperature" 10<C<=20时,打印"Cool" 0<C<=10时,打印"Cold" C<0时,打印"Freezing"
好的,根据您的要求,我可以为您编写一个华氏温度转换成摄氏温度并作出相应提示的程序,代码如下:
```python
# 输入华氏温度
fahrenheit = float(input("请输入华氏温度:"))
# 转换为摄氏温度
celsius = (5 / 9) * (fahrenheit - 32)
# 根据转换结果输出相应的提示
if celsius > 40:
print("Hot")
elif 30 < celsius <= 40:
print("Warm")
elif 20 < celsius <= 30:
print("Room Temperature")
elif 10 < celsius <= 20:
print("Cool")
elif 0 < celsius <= 10:
print("Cold")
else:
print("Freezing")
```
您可以复制上述代码并在Python环境中运行,输入您想要转换的华氏温度,程序将自动计算并输出相应的提示。希望对您有所帮助!
单片机数字温度计显示温度0 - 99℃分辨率 0.1℃代码
以下是一个基于Arduino平台的简单示例代码,用于实现单片机数字温度计显示温度0 - 99℃分辨率 0.1℃:
```C++
#include <OneWire.h> // 导入OneWire库
#include <DallasTemperature.h> // 导入DallasTemperature库
// 定义温度传感器引脚
#define ONE_WIRE_BUS 2
// 创建OneWire对象和DallasTemperature对象
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
// 定义显示器引脚
const int digits[4] = {3, 4, 5, 6}; // 分别对应个位、十位、百位、千位
// 定义温度变量
float temperature = 0;
void setup() {
// 初始化串口通信
Serial.begin(9600);
// 初始化温度传感器
sensors.begin();
// 初始化显示器引脚
for (int i = 0; i < 4; i++) {
pinMode(digits[i], OUTPUT);
}
}
void loop() {
// 获取温度值
sensors.requestTemperatures();
temperature = sensors.getTempCByIndex(0);
// 舍入到0.1℃分辨率
temperature = round(temperature * 10) / 10.0;
// 显示温度值
displayTemperature(temperature);
// 延时一段时间
delay(1000);
}
// 显示温度值
void displayTemperature(float temperature) {
// 分别计算个位、十位、百位、千位数值
int digit1 = temperature / 10;
int digit2 = (int)temperature % 10;
int digit3 = (int)(temperature * 10) % 10;
int digit4 = (int)(temperature * 100) % 10;
// 定义数字显示表
byte numbers[10][7] = {
{1, 1, 1, 1, 1, 1, 0}, // 0
{0, 1, 1, 0, 0, 0, 0}, // 1
{1, 1, 0, 1, 1, 0, 1}, // 2
{1, 1, 1, 1, 0, 0, 1}, // 3
{0, 1, 1, 0, 0, 1, 1}, // 4
{1, 0, 1, 1, 0, 1, 1}, // 5
{1, 0, 1, 1, 1, 1, 1}, // 6
{1, 1, 1, 0, 0, 0, 0}, // 7
{1, 1, 1, 1, 1, 1, 1}, // 8
{1, 1, 1, 1, 0, 1, 1} // 9
};
// 将数字显示在数码管上
digitalWrite(digits[0], HIGH);
for (int i = 0; i < 7; i++) {
digitalWrite(i + 7, numbers[digit1][i]);
}
delay(1);
digitalWrite(digits[0], LOW);
digitalWrite(digits[1], HIGH);
for (int i = 0; i < 7; i++) {
digitalWrite(i + 7, numbers[digit2][i]);
}
delay(1);
digitalWrite(digits[1], LOW);
digitalWrite(digits[2], HIGH);
for (int i = 0; i < 7; i++) {
digitalWrite(i + 7, numbers[digit3][i]);
}
delay(1);
digitalWrite(digits[2], LOW);
digitalWrite(digits[3], HIGH);
for (int i = 0; i < 7; i++) {
digitalWrite(i + 7, numbers[digit4][i]);
}
delay(1);
digitalWrite(digits[3], LOW);
}
```
该代码使用了OneWire库和DallasTemperature库来读取温度传感器的值,并使用七段数码管显示温度值。请注意,该代码中的数字显示表是基于常规的七段数码管布局设计的,如果您使用的是其他类型的数字显示器,您可能需要修改数字显示表的定义以适应您的硬件。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)