arduino,lcd显示
时间: 2024-01-09 09:06:06 浏览: 35
要在Arduino上使用LCD显示,您需要连接LCD到Arduino并编写代码来控制它。
以下是连接步骤:
1.将LCD插入面包板中,并将其连接到Arduino。
2.通过连接LCD的VSS引脚到地线,将其接地。
3.将LCD的VDD引脚连接到Arduino的+5V引脚。
4.将LCD的VO引脚连接到一个可变电阻器的中间引脚,然后将另外两个引脚连接到+5V和地线。
5.将LCD的RS引脚连接到Arduino的数字引脚12。
6.将LCD的RW引脚连接到Arduino的地线。
7.将LCD的E引脚连接到Arduino的数字引脚11。
8.将LCD的D4-D7引脚连接到Arduino的数字引脚5-8。
下面是一个简单的代码示例来控制LCD显示:
#include <LiquidCrystal.h>
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
void setup() {
// set up the LCD's number of columns and rows:
lcd.begin(16, 2);
// Print a message to the LCD.
lcd.print("Hello, World!");
}
void loop() {
// set the cursor to column 0, line 1
// (note: line 1 is the second row, since counting begins with 0):
lcd.setCursor(0, 1);
// print the number of seconds since reset:
lcd.print(millis() / 1000);
}
此代码将在LCD上显示“Hello, World!”和自上电以来的秒数。您可以根据需要修改代码来显示不同的消息和数据。