基于单片机的实时时钟代码
时间: 2024-01-10 08:04:01 浏览: 24
以下是一个基于单片机的实时时钟代码的示例,以STM32为例:
```c
#include "stm32f4xx.h"
RTC_TimeTypeDef RTC_TimeStructure;
RTC_DateTypeDef RTC_DateStructure;
void RTC_Config(void)
{
RTC_InitTypeDef RTC_InitStruct;
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
RTC_TimeTypeDef RTC_TimeInitStruct;
RTC_DateTypeDef RTC_DateInitStruct;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
PWR_BackupAccessCmd(ENABLE);
RCC_LSEConfig(RCC_LSE_ON);
while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET);
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
RCC_RTCCLKCmd(ENABLE);
RTC_TimeInitStruct.RTC_Hours = 0x00;
RTC_TimeInitStruct.RTC_Minutes = 0x00;
RTC_TimeInitStruct.RTC_Seconds = 0x00;
RTC_TimeInitStruct.RTC_H12 = RTC_H12_AM;
RTC_SetTime(RTC_Format_BIN, &RTC_TimeInitStruct);
RTC_DateInitStruct.RTC_Month = RTC_Month_January;
RTC_DateInitStruct.RTC_Date = 0x01;
RTC_DateInitStruct.RTC_Year = 0x21;
RTC_DateInitStruct.RTC_WeekDay = RTC_Weekday_Saturday;
RTC_SetDate(RTC_Format_BIN, &RTC_DateInitStruct);
RTC_InitStruct.RTC_AsynchPrediv = 0x7F;
RTC_InitStruct.RTC_SynchPrediv = 0x00FF;
RTC_InitStruct.RTC_HourFormat = RTC_HourFormat_24;
RTC_Init(&RTC_InitStruct);
}
void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct)
{
RTC_TimeStruct->RTC_Hours = RTC_GetHour(RTC_Format);
RTC_TimeStruct->RTC_Minutes = RTC_GetMinute(RTC_Format);
RTC_TimeStruct->RTC_Seconds = RTC_GetSecond(RTC_Format);
RTC_TimeStruct->RTC_H12 = RTC_GetAMPMFlag();
}
void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct)
{
RTC_DateStruct->RTC_Year = RTC_GetYear(RTC_Format);
RTC_DateStruct->RTC_Month = RTC_GetMonth(RTC_Format);
RTC_DateStruct->RTC_Date = RTC_GetDate(RTC_Format);
RTC_DateStruct->RTC_WeekDay = RTC_GetWeekDay();
}
int main(void)
{
RTC_Config();
while(1)
{
RTC_GetDate(RTC_Format_BIN, &RTC_DateStructure);
RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);
/* 在此处可以进行时间操作 */
}
}
```
这个代码实现了从外部低速晶振(LSE)获取时钟信号,然后配置RTC的时间和日期,最后在主函数中通过`RTC_GetTime`和`RTC_GetDate`函数获取当前的时间和日期。在while循环中可以实现时间的操作。