当检测到司机疲劳时SLEEP=1开始保存视频直到司机不疲劳SLEEP=0代码
时间: 2023-10-04 11:04:47 浏览: 45
好的,针对您的问题,我提供以下伪代码:
```
while True:
if detect_fatigue():
sleep = 1
video = start_recording_video()
while detect_fatigue():
continue
sleep = 0
stop_recording_video(video)
```
在这段代码中,我们首先使用 `detect_fatigue()` 函数来检测司机是否疲劳。如果是,则将变量 `sleep` 设置为 1,表示正在记录疲劳状态的视频。然后调用 `start_recording_video()` 函数开始录制视频。接下来,我们在一个循环中不断检测司机的状态,直到司机不再疲劳为止。一旦检测到司机不再疲劳,我们将变量 `sleep` 设置为 0,表示停止记录视频。最后,我们调用 `stop_recording_video()` 函数停止录制视频。
请注意,这只是伪代码,实际上需要根据您的具体情况进行修改和调整。
相关问题
通过cv2实现当检测到司机疲劳时SLEEP=1开始保存视频直到司机不疲劳SLEEP=0代码
好的,针对您的问题,我提供以下基于OpenCV的Python代码:
```python
import cv2
video_capture = cv2.VideoCapture(0)
fourcc = cv2.VideoWriter_fourcc(*'XVID')
out = cv2.VideoWriter('fatigue_detection.avi', fourcc, 20.0, (640, 480))
sleep = 0
while True:
ret, frame = video_capture.read()
# 进行疲劳检测
is_fatigue = detect_fatigue(frame)
if is_fatigue and sleep == 0:
sleep = 1
out = cv2.VideoWriter('fatigue_detection.avi', fourcc, 20.0, (640, 480))
out.write(frame)
elif not is_fatigue and sleep == 1:
sleep = 0
out.release()
if sleep == 1:
out.write(frame)
cv2.imshow('Video', frame)
if cv2.waitKey(1) & 0xFF == ord('q'):
break
video_capture.release()
cv2.destroyAllWindows()
```
在这段代码中,我们首先使用 `cv2.VideoCapture()` 函数打开摄像头,然后使用 `cv2.VideoWriter()` 函数创建一个视频输出对象,用于保存疲劳检测期间的视频。然后,我们进入一个无限循环,不断读取摄像头的视频流,并进行疲劳检测。
如果检测到司机疲劳并且变量 `sleep` 的值为 0,则将变量 `sleep` 设置为 1,并创建一个新的视频输出对象。如果检测到司机不再疲劳并且变量 `sleep` 的值为 1,则将变量 `sleep` 设置为 0,并关闭先前创建的视频输出对象。如果变量 `sleep` 的值为 1,则将当前帧写入视频输出对象中。最后,我们使用 `cv2.imshow()` 函数将视频流显示出来,并使用 `cv2.waitKey()` 函数等待用户按下 'q' 键退出循环。
请注意,这只是一个简单的示例代码,您需要根据实际情况进行修改和调整。另外,您需要实现 `detect_fatigue()` 函数,用于检测司机的疲劳状态。
运动疲劳检测代码
运动疲劳检测是通过监测人体运动状态和生理数据来判断是否出现疲劳,常用的指标包括心率、呼吸频率、血压、血糖、运动时长等。以下是一个运动疲劳检测的示例代码,可以实时监测心率和运动时长,当心率超过阈值或者运动时长达到一定时间时,会提示用户注意休息,以防止运动过度造成身体损伤。
```python
import time
import random
# 模拟心率传感器每秒钟采集的心率数据
def get_heart_rate():
return random.randint(60, 150)
# 模拟计时器,记录运动时长
def get_time_elapsed(start_time):
return time.time() - start_time
# 判断是否疲劳,当心率超过阈值或者运动时长达到一定时间时,提示用户注意休息
def check_fatigue(heart_rate, time_elapsed, heart_rate_threshold=120, time_threshold=30*60):
if heart_rate > heart_rate_threshold:
print("心率过高,请注意休息!")
if time_elapsed > time_threshold:
print("运动时间过长,请注意休息!")
# 主程序,每秒钟监测一次心率和运动时长,并判断是否疲劳
def main():
start_time = time.time()
while True:
heart_rate = get_heart_rate()
time_elapsed = get_time_elapsed(start_time)
print("心率:{},运动时间:{}".format(heart_rate, time_elapsed))
check_fatigue(heart_rate, time_elapsed)
time.sleep(1)
if __name__ == '__main__':
main()
```
注意:这只是一个示例代码,具体的心率阈值和运动时间阈值应根据个体情况和医学建议来设置。