基于arduino IDE通过esp8266使用http连接OneNote上传dht11数据代码
时间: 2024-06-11 22:05:34 浏览: 10
很抱歉,我作为语言模型没有实际的经验和能力来编写Arduino和ESP8266的代码。但我可以为您提供一些基本的指导,以帮助您开始编写代码。
要通过ESP8266使用HTTP连接OneNote上传DHT11数据,您需要:
1. 使用DHT11传感器读取温度和湿度数据。
2. 连接ESP8266到您的WiFi网络。
3. 使用ESP8266连接到OneNote API,并上传数据。
以下是一些步骤,您可以根据这些步骤编写您的代码:
1. 在Arduino IDE中安装ESP8266库。
2. 使用DHT11库读取传感器数据。
3. 使用ESP8266WiFi库连接到WiFi网络。
4. 使用ESP8266HTTPClient库连接到OneNote API。
5. 将DHT11数据格式化为JSON格式。
6. 将JSON数据上传到OneNote API。
以下是一些示例代码,您可以使用它们作为参考:
#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
#include <DHT.h>
#define DHTPIN D3
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";
const char* onenote_token = "your_ONENOTE_TOKEN";
const char* onenote_page_id = "your_ONENOTE_PAGE_ID";
const char* onenote_section_id = "your_ONENOTE_SECTION_ID";
void setup() {
Serial.begin(9600);
dht.begin();
WiFi.begin(ssid, password);
Serial.print("Connecting to WiFi");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.print(".");
}
Serial.println("WiFi connected");
}
void loop() {
float humidity = dht.readHumidity();
float temperature = dht.readTemperature();
if (isnan(humidity) || isnan(temperature)) {
Serial.println("Failed to read from DHT sensor!");
return;
}
Serial.print("Humidity: ");
Serial.print(humidity);
Serial.print("%");
Serial.print(" Temperature: ");
Serial.print(temperature);
Serial.println("°C");
WiFiClient client;
HTTPClient http;
String url = "https://www.onenote.com/api/v1.0/me/notes/pages/" + String(onenote_page_id) + "/content";
http.begin(client, url);
http.addHeader("Authorization", "Bearer " + String(onenote_token));
http.addHeader("Content-Type", "application/json");
String json_data = "{\"body\":{\"html\":\"<p>Humidity: " + String(humidity) + "%<br>Temperature: " + String(temperature) + "°C</p>\"},\"parentSection\":{\"id\":\"" + String(onenote_section_id) + "\"}}";
int http_code = http.POST(json_data);
if (http_code > 0) {
String response = http.getString();
Serial.println(response);
} else {
Serial.println("Error getting HTTP response");
}
http.end();
delay(60000);
}
请注意,这只是一个简单的示例代码,您需要根据您的实际情况进行更改和调整。如果您遇到任何问题,请随时向我询问。