假如我想在主设备上编写一个按键代码,我如何编写can发送代码
时间: 2023-05-26 18:05:07 浏览: 41
您可以使用以下代码来发送CAN消息:
```
#include <CAN.h>
void setup() {
CAN.begin(250E3); // Initialize CAN bus with baud rate of 250 kbps
}
void loop() {
// Set up CAN message
CAN_Message message;
message.id = 0x123; // Set CAN message ID
message.len = 1; // Set length of message data
message.data[0] = 0x01; // Set data byte 0 (change this to the key code you want to send)
// Send CAN message
if (CAN.write(message)) {
Serial.println("CAN message sent successfully");
} else {
Serial.println("Error sending CAN message");
}
delay(100); // Delay before sending next CAN message
}
```
请注意,在发送CAN消息之前,您需要在主设备上正确配置CAN总线。此外,您需要将该设备连接到CAN总线上,并在主设备上正确配置CAN协议和CAN总线参数。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)