Error in if (nx >= 231 ny >= 231) stop("long vectors are not supported") missing value where TRUE/FALSE needed
时间: 2024-04-11 17:29:10 浏览: 9
这个错误通常是由于在条件语句中使用了缺失值引起的。在这种情况下,条件语句需要一个逻辑表达式来判断是否为真或假,但由于存在缺失值,无法确定条件的真假性。
要解决此问题,你可以使用`is.na()`函数来检查变量是否为缺失值。例如,你可以修改条件语句如下:
```R
if (is.na(nx) || is.na(ny) || nx >= 231 || ny >= 231) {
stop("long vectors are not supported")
}
```
这样,如果`nx`或`ny`是缺失值,或者它们的值大于等于231,都会触发错误。通过添加`is.na()`的检查,可以避免因为缺失值而导致的错误。
相关问题
出现这个错误??? Error using ==> plot Vectors must be the same lengths.
这个错误提示是因为在绘制图像时,X 轴和 Y 轴的向量长度不一致导致的。具体来说,可能是因为 `xt_t` 的向量长度不同于 `t3` 的向量长度导致的。你可以尝试将 `xt_t` 的长度截取为和 `t3` 相同的长度。修改后的代码如下:
```matlab
clear all;
close all;
dt = 0.01;
t = 0:dt:10;
xt = 0.1*sin(2*pi*t) + 0.5*cos(4*pi*t);
[f, xf] = FFT_SHIFT(t,xt); %号抽样信号,抽样速率为4Hz
fs = 4;
sdt = 1/fs;
t1 = 0:sdt:10;
st = 0.1*sin(2*pi*t1) + 0.5*cos(4*pi*t1);
[f1, sf] = FFT_SHIFT(t1,st); %8恢复原始信号
t2 = -50:dt:50;
gt = sinc(fs*t2);
stt = resample(st,1,sdt/dt);
xt_t = conv(stt,gt);
xt_t = xt_t(1:length(t3)); % 截取和 t3 长度相同的部分
figure(1)
subplot(3,1,1);
plot(t,xt);
title('原始信号');
subplot(3,1,2);
stem(t1,st);
title('抽样信号');
subplot(3,1,3);
t3 = -50:dt:60+sdt-dt;
plot(t3,xt_t);
title('抽样信号恢复');
axis([0 10 -1 1])
```
这个修改后的代码中增加了一行代码 `xt_t = xt_t(1:length(t3));`,将 `xt_t` 的长度截取为和 `t3` 相同的长度。这样就可以避免上述错误提示了。
extern UFUNEXPORT void UF_VEC3_is_perpendicular ( const double vec1[3], /* <I> 3D vector */ const double vec2[3], /* <I> 3D vector */ double tolerance, /* <I> tolerance */ int *is_perp /* <O> = 0 Vectors are not perpendicular = 1 Vectors are perpendicular */ );/* <NEC> */
这是一个用于判断两个三维向量是否垂直的函数。以下是函数的参数和使用方法:
参数:
- vec1:长度为3的double类型数组,表示第一个向量的3个分量。
- vec2:长度为3的double类型数组,表示第二个向量的3个分量。
- tolerance:double类型的容差值,用于比较两个向量是否垂直。如果它们的点积的绝对值小于tolerance,则认为它们垂直。
- is_perp:int类型的指针,用于存储判断结果。如果两个向量垂直,则将其设置为1,否则设置为0。
使用方法:
1. 定义两个向量和一个存储判断结果的变量:
```
double vec1[3] = {1, 0, 0};
double vec2[3] = {0, 1, 0};
int isPerpendicular = 0;
```
2. 调用函数并将向量和容差值作为参数传递:
```
UF_VEC3_is_perpendicular(vec1, vec2, 1e-6, &isPerpendicular);
```
3. 查看判断结果:
```
if (isPerpendicular) {
printf("The two vectors are perpendicular.\n");
} else {
printf("The two vectors are not perpendicular.\n");
}
```
在这个例子中,我们定义了两个向量并将它们作为参数传递给函数来判断它们是否垂直。容差值设置为1e-6,表示两个向量点积的绝对值小于1e-6时认为它们垂直。最后,我们根据判断结果输出相应的信息。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)