stm32f103c8t6判断是否为高低电平的代码
时间: 2024-06-22 21:02:48 浏览: 14
在STM32F103C8T6单片机中,使用GPIO口来判断输入信号(如外部引脚)的高低电平时,你需要配置GPIO作为输入模式,并读取其状态。以下是一个基本的示例代码,假设我们使用GPIOA的PA0引脚:
```c
#include "stm32f10x.h" // 包含STM32的头文件
// 初始化GPIOA的PA0为输入模式
void GPIOA_Init(void) {
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE); // 启动GPIOA时钟
GPIO_InitTypeDef GPIO_InitStructure; // 定义GPIO初始化结构体
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; // 设置需要配置的引脚
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; // 输入模式
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; // 设置速度为50MHz
GPIO_Init(GPIOA, &GPIO_InitStructure); // 初始化GPIO
}
// 判断PA0的电平
uint8_t ReadPinLevel(void) {
GPIO_PinState pinState = GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0); // 读取GPIO的输入状态
if (pinState == GPIO_PinState_High) { // 如果是高电平
return HIGH_LEVEL;
} else { // 否则是低电平
return LOW_LEVEL;
}
}
int main(void) {
GPIOA_Init(); // 初始化GPIOA
while (1) {
uint8_t level = ReadPinLevel(); // 读取PA0的电平
if (level == HIGH_LEVEL) {
printf("PA0 is at high level.\n");
} else {
printf("PA0 is at low level.\n");
}
}
return 0;
}
```
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)