stm32uart发送八个十六进制数
时间: 2023-08-06 13:08:02 浏览: 50
您好!要在STM32上使用UART发送八个十六进制数,您可以使用以下代码示例:
```c
#include "stm32f4xx.h"
void USART2_Init(void) {
// 初始化USART2
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_USART2);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_USART2);
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx;
USART_Init(USART2, &USART_InitStruct);
USART_Cmd(USART2, ENABLE);
}
void USART2_SendHex(uint8_t* data, uint8_t length) {
for (uint8_t i = 0; i < length; i++) {
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET); // 等待发送缓冲区为空
USART_SendData(USART2, data[i]); // 发送数据
}
}
int main(void) {
USART2_Init();
uint8_t hexData[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF};
USART2_SendHex(hexData, sizeof(hexData) / sizeof(hexData[0]));
while (1) {
// 主循环
}
}
```
上述代码使用USART2发送了一个包含八个十六进制数的数组。您可以根据需要修改波特率、引脚配置和数据内容等。请确保已正确配置STM32的时钟和引脚,并根据您的需求进行相应的修改。希望对您有所帮助!如果您有任何疑问,请随时提问。