dht11.read()
时间: 2024-06-15 19:05:09 浏览: 14
dht11.read()是一个函数,用于读取DHT11温湿度传感器的数据。DHT11是一种数字温湿度传感器,可以测量环境的温度和湿度。通过调用dht11.read()函数,可以获取当前环境的温度和湿度值。
该函数的具体实现可能因不同的编程语言或平台而有所不同。一般情况下,该函数会返回一个包含温度和湿度值的数据结构或对象。你可以通过访问该结构或对象的属性来获取温度和湿度值。
相关问题
#include "dht11.h" #define dht_PIN 2 dht11(DHT_PIN); void setup() { Serial.begin(9600); } void loop() { int ret = dht11.read(); if(ret == DHTLIB_ERROR_CHECKSUM) { Serial.println("(E) Checksum failed"); return; } else if(ret == DHTLIB_ERROR_TIMEOUT) { Serial.println("(E) Read time out"); return; } float m1= analogRead(AI2); float m2= analogRead(AI3); Serial.print((float)dht11.getTemperature(), 2); Serial.print(","); Serial.print((float)dht11.getHumidity(), 2); Serial.print(","); Serial.print(m1); Serial.print(","); Serial.println(m2); delay(200); //A0更新位置位 }
好的,看起来这段代码是读取DHT11温湿度传感器和两个模拟信号的值,并将这些值通过串口输出。不过这段代码存在几个问题,我帮您修改一下:
```
#include <dht.h> //头文件名应该是dht.h
#define DHT_PIN 2 //宏定义应该是DHT_PIN,而不是dht_PIN
dht DHT; //创建dht对象
void setup() {
Serial.begin(9600);
}
void loop() {
int chk = DHT.read11(DHT_PIN); //使用DHT对象读取温湿度值
float m1 = analogRead(A2); //A2和A3应该是数字2和数字3
float m2 = analogRead(A3);
Serial.print("Temperature: ");
Serial.print(DHT.temperature); //DHT对象的温度值为整数型,不需要转换
Serial.print("°C\t");
Serial.print("Humidity: ");
Serial.print(DHT.humidity); //DHT对象的湿度值为整数型,不需要转换
Serial.print("%\t");
Serial.print("Analog1: ");
Serial.print(m1);
Serial.print("\tAnalog2: ");
Serial.println(m2);
delay(200);
}
```
这是修改后的代码,主要修改如下:
1. 头文件名应该是`dht.h`,而不是`dht11.h`
2. 宏定义应该是`DHT_PIN`,而不是`dht_PIN`
3. 创建`dht`对象时需要指定名称,否则会出现`error: 'dht11' does not name a type`的编译错误
4. 读取温湿度值时应该使用`DHT.read11(DHT_PIN)`,而不是`dht11.read()`
5. 模拟信号的引脚应该是数字引脚,而不是`AI2`和`AI3`
6. 输出时需要加上相应的单位和分隔符
希望能帮到您!
#include <DHT11.h>
这是一个用于 DHT11 温湿度传感器的 Arduino 库。DHT11 是一种数字式温湿度传感器,可以通过单一的数据线进行通讯,非常方便。这个库可以让你轻松地读取 DHT11 传感器的温度和湿度数据。以下是一个简单的例子:
```
#include <DHT11.h>
#define DHT11_PIN 2
DHT11 dht11(DHT11_PIN);
void setup() {
Serial.begin(9600);
}
void loop() {
int chk = dht11.read(DHT11_PIN);
Serial.print("Temperature: ");
Serial.println(dht11.temperature);
Serial.print("Humidity: ");
Serial.println(dht11.humidity);
delay(2000);
}
```
在这个例子中,我们使用 `DHT11_PIN` 定义传感器的数据引脚,然后在 `setup()` 函数中初始化串口。在 `loop()` 函数中,我们首先调用 `dht11.read()` 函数来读取传感器的数据,并将结果存储在 `dht11.temperature` 和 `dht11.humidity` 变量中。然后我们使用串口输出这些值,并延迟 2 秒钟以便稍微缓解一下传感器。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)