USART_INT_FLAG_RBNE
时间: 2024-03-05 16:46:42 浏览: 34
USART_INT_FLAG_RBNE是USART(通用同步/异步收发器)的接收缓冲区非空中断标志位。当USART接收缓冲区中有数据时,该标志位会被置位,表示接收到了新的数据。
USART是一种串行通信接口,常用于将数据从一个设备传输到另一个设备。USART_INT_FLAG_RBNE是USART的一个中断标志位,用于指示接收缓冲区是否有新的数据可供读取。
当USART接收到数据后,它会将数据存储在接收缓冲区中,并置位USART_INT_FLAG_RBNE标志位。通过检查该标志位的状态,可以判断是否有新的数据可供处理。
相关问题
GD32F130 串口收发
下面是一个基本的GD32F130串口收发的代码示例,使用了GD32的标准库:
```
#include "gd32f1x0.h"
/* 定义串口收发缓存区 */
#define BUF_SIZE 64
uint8_t uart_receive_buf[BUF_SIZE];
uint8_t uart_send_buf[BUF_SIZE] = "Hello, world!\r\n";
/* 定义串口配置结构体 */
usart_parameter_struct uart_init_struct;
int main(void)
{
/* 使能串口时钟 */
rcu_periph_clock_enable(RCU_USART0);
/* 配置串口引脚 */
gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_2 | GPIO_PIN_3);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_2 | GPIO_PIN_3);
/* 配置串口参数 */
usart_deinit(USART0);
uart_init_struct.usart_baudrate = 115200;
uart_init_struct.usart_word_length = USART_WL_8BIT;
uart_init_struct.usart_stop_bits = USART_STB_1;
uart_init_struct.usart_parity = USART_PM_NONE;
uart_init_struct.usart_hardware_flow_control = USART_HFCTRL_NONE;
uart_init_struct.usart_mode = USART_MODE_TX_RX;
usart_init(USART0, &uart_init_struct);
/* 使能串口接收中断 */
usart_interrupt_enable(USART0, USART_INT_RBNE);
/* 使能串口 */
usart_enable(USART0);
while (1)
{
/* 发送数据 */
usart_data_transmit(USART0, uart_send_buf[0]);
}
}
/* 串口中断处理函数 */
void USART0_IRQHandler(void)
{
if (usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE))
{
/* 接收数据 */
uint8_t ch = usart_data_receive(USART0);
/* 处理接收到的数据 */
}
}
```
这个代码中,我们使用GD32的标准库来进行串口的配置和收发。首先,我们使用rcu_periph_clock_enable函数使能USART0的时钟,并使用gpio_af_set和gpio_mode_set函数配置串口引脚。然后,我们使用usart_init函数配置串口参数,并使用usart_interrupt_enable函数使能串口接收中断。最后,我们在主循环中使用usart_data_transmit函数发送数据,在中断处理函数中使用usart_data_receive函数接收数据。
帮我写一个GD32串口接收中断
当然可以帮你写一个GD32串口接收中断的代码。以下是一个示例:
```c
#include "gd32f10x.h"
#include <stdio.h>
#define USART0_BUFFER_SIZE 100
volatile uint8_t usart0_rx_buffer[USART0_BUFFER_SIZE];
volatile uint32_t usart0_rx_index = 0;
void usart0_init(void)
{
/* 使能串口时钟 */
rcu_periph_clock_enable(RCU_USART0);
/* 配置USART0引脚 */
gpio_init(GPIOA, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9); // TX
gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_10); // RX
/* 配置USART0参数 */
usart_deinit(USART0);
usart_baudrate_set(USART0, 115200);
usart_word_length_set(USART0, USART_WL_8BIT);
usart_stop_bit_set(USART0, USART_STB_1BIT);
usart_parity_config(USART0, USART_PM_NONE);
usart_hardware_flow_rts_config(USART0, USART_RTS_DISABLE);
usart_hardware_flow_cts_config(USART0, USART_CTS_DISABLE);
usart_receive_config(USART0, USART_RECEIVE_ENABLE);
usart_interrupt_enable(USART0, USART_INT_RBNE);
/* 使能串口 */
usart_enable(USART0);
}
void USART0_IRQHandler(void)
{
if (usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE))
{
/* 读取接收数据 */
uint8_t data = usart_data_receive(USART0);
/* 将接收到的数据存入缓冲区 */
usart0_rx_buffer[usart0_rx_index++] = data;
/* 缓冲区溢出处理 */
if (usart0_rx_index >= USART0_BUFFER_SIZE)
{
usart0_rx_index = 0;
}
}
}
int main(void)
{
/* 初始化串口 */
usart0_init();
while (1)
{
/* 在此处添加你的代码逻辑 */
}
}
```
这段代码实现了GD32的USART0串口接收中断功能。在中断处理函数`USART0_IRQHandler`中,当接收到数据时,将数据存入缓冲区`usart0_rx_buffer`中,并递增索引`usart0_rx_index`。你可以在主循环中添加自己的代码逻辑来处理接收到的数据。
请确保在使用之前,已经正确配置了GD32的时钟和GPIO引脚,以及启用了相应的中断。同时,根据你的需求,可能需要调整波特率、数据位数、停止位等串口参数。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)