LINUX下串口接收程序
时间: 2023-08-23 11:06:13 浏览: 39
在Linux下,可以使用C语言编写串口接收程序。下面是一个简单的示例代码:
```c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
int main() {
int fd;
char buffer[255];
// 打开串口设备
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1) {
perror("无法打开串口设备");
return -1;
}
// 配置串口
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600); // 设置波特率为9600
cfsetospeed(&options, B9600);
options.c_cflag |= (CLOCAL | CREAD); // 忽略调制解调器状态,启用接收器
options.c_cflag &= ~PARENB; // 禁用奇偶校验
options.c_cflag &= ~CSTOPB; // 设置停止位为1
options.c_cflag &= ~CSIZE; // 清除数据位设置
options.c_cflag |= CS8; // 设置数据位为8位
tcsetattr(fd, TCSANOW, &options);
// 读取数据
while (1) {
int bytesRead = read(fd, buffer, sizeof(buffer));
if (bytesRead > 0) {
printf("接收到数据:%.*s\n", bytesRead, buffer);
}
}
// 关闭串口设备
close(fd);
return 0;
}
```
以上代码通过打开`/dev/ttyS0`设备文件来访问串口。你可能需要根据你的实际情况修改设备文件路径,例如`/dev/ttyUSB0`或`/dev/ttyAMA0`等。
在代码中,我们首先打开串口设备,然后配置串口的参数,包括波特率、数据位、停止位和奇偶校验等。最后,我们进入一个无限循环,在循环中不断读取串口接收到的数据,并打印出来。
请注意,以上代码仅为简单示例,可能需要根据你的具体需求进行修改和扩展。同时,在编译时需要链接`-lpthread`库。