overlay隧道配置命令
时间: 2023-11-15 14:06:40 浏览: 38
在网络中,Overlay Tunnel(覆盖隧道)是一种虚拟隧道,可以通过公共互联网连接两个或多个远程站点。以下是一些常用的 Overlay Tunnel 配置命令:
1. GRE 隧道配置命令:
```
interface tunnel0
ip address 10.1.1.1 255.255.255.0
tunnel source 192.168.1.1
tunnel destination 192.168.2.1
tunnel mode gre ipv4
```
2. IPSec 隧道配置命令:
```
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key mykey address 1.1.1.1
crypto ipsec transform-set myset esp-aes 256 esp-sha-hmac
crypto map mymap 10 ipsec-isakmp
set peer 1.1.1.1
set transform-set myset
match address 101
interface tunnel0
ip address 192.168.10.1 255.255.255.0
tunnel source 192.168.1.1
tunnel destination 1.1.1.1
tunnel protection ipsec profile mymap
```
3. VXLAN 隧道配置命令:
```
interface loopback0
ip address 10.0.0.1 255.255.255.255
interface Ethernet1/1
ip address 172.16.1.1 255.255.255.0
vxlan udp-port 4789
!
vxlan vlan 10 vni 10000 dst-ip 10.0.0.2
vxlan vlan 10 vni 10000 dst-ip 10.0.0.3
```
这些命令仅作为参考,实际配置可能因厂商和设备型号而异。请在使用前查看设备和软件的特定文档,并确保正确地配置 Overlay 隧道。