Cursor 如何正确初始化
时间: 2024-05-09 07:15:44 浏览: 22
在很多编程语言中,光标(Cursor)通常指代一个指向屏幕或文本框中的当前位置的可见符号。在初始化光标时,需要注意以下几点:
1. 确定光标的起始位置。起始位置表示光标最初显示在屏幕或文本框中的位置。这通常由应用程序的需求和设计决定。
2. 确定光标的样式。光标的样式通常包括形状、大小和颜色等属性。这些属性也取决于应用程序的需求和设计。
3. 确定光标的初始状态。在某些情况下,光标可能需要在应用程序启动时立即显示,而在其他情况下,光标可能需要在用户执行特定操作后才会显示。
在不同的编程语言和操作系统中,光标的初始化方式可能会有所不同。例如,在C语言中,可以使用库函数来初始化光标,例如:
```
#include <conio.h>
int _setcursortype(int type);
```
这个函数可以设置光标的类型,例如隐藏光标、显示光标或闪烁光标等。在Java中,可以使用AWT或Swing类库中的相关组件来设置光标的类型和位置。在HTML和CSS中,可以使用样式表来设置光标的样式和位置。
总之,正确初始化光标需要考虑应用程序的需求和设计,并根据编程语言和操作系统的不同采取相应的初始化方法。
相关问题
详细写出stm32f103c6t6的LCD1602初始化程序代码
### 回答1:
LCD1602初始化程序代码://初始化LCD1602
void LCD1602_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
//使能GPIO时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOC, ENABLE);
//设置引脚模式
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
//设置引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
GPIO_Init(GPIOC, &GPIO_InitStructure);
//初始化
LCD1602_Write_Cmd(0x38);
LCD1602_Write_Cmd(0x0c);
LCD1602_Write_Cmd(0x06);
LCD1602_Write_Cmd(0x01);
}
### 回答2:
下面是一个基于STM32F103C6T6的LCD1602初始化程序代码:
#include "stm32f10x.h"
// 定义LCD相关的GPIO引脚
#define LCD_Port GPIOB
#define LCD_RS_Pin GPIO_Pin_12
#define LCD_EN_Pin GPIO_Pin_13
#define LCD_D4_Pin GPIO_Pin_14
#define LCD_D5_Pin GPIO_Pin_15
void LCD_Init(void)
{
// 使能GPIOB外设时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
// 配置LCD引脚为推挽输出模式
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.GPIO_Pin = LCD_RS_Pin | LCD_EN_Pin | LCD_D4_Pin | LCD_D5_Pin;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LCD_Port, &GPIO_InitStruct);
// 默认设置RS、EN、D4、D5为低电平
GPIO_ResetBits(LCD_Port, LCD_RS_Pin);
GPIO_ResetBits(LCD_Port, LCD_EN_Pin);
GPIO_ResetBits(LCD_Port, LCD_D4_Pin);
GPIO_ResetBits(LCD_Port, LCD_D5_Pin);
// 初始化LCD显示器
LCD_WriteCommand(0x28); // 4位数据线,2行显示,5x8点阵字符
LCD_WriteCommand(0x0E); // Display ON,Cursor ON,Cursor Blinking
LCD_WriteCommand(0x06); // Entry Mode Set: 光标右移,显示不移动
LCD_WriteCommand(0x01); // Clear Display
LCD_WriteCommand(0x80); // Set DDRAM地址到第一行第一列
}
void LCD_WriteCommand(uint8_t command)
{
// RS引脚设置为低电平,表示写入的是命令
GPIO_ResetBits(LCD_Port, LCD_RS_Pin);
// 发送高4位
GPIO_WriteBits(LCD_Port, LCD_D4_Pin, (command >> 4) & 0x0F);
// 使能LCD
GPIO_SetBits(LCD_Port, LCD_EN_Pin);
Delay_us(1);
GPIO_ResetBits(LCD_Port, LCD_EN_Pin);
// 发送低4位
GPIO_WriteBits(LCD_Port, LCD_D4_Pin, command & 0x0F);
// 使能LCD
GPIO_SetBits(LCD_Port, LCD_EN_Pin);
Delay_us(1);
GPIO_ResetBits(LCD_Port, LCD_EN_Pin);
}
void Delay_us(uint32_t us)
{
us *= 7;
while(us--);
}
### 回答3:
以下是一个简单的STM32F103C6T6的LCD1602初始化程序代码:
#include "stm32f10x.h"
#define LCD_RS_PIN GPIO_Pin_0 // 连接到LCD的RS引脚
#define LCD_RW_PIN GPIO_Pin_1 // 连接到LCD的RW引脚
#define LCD_EN_PIN GPIO_Pin_2 // 连接到LCD的EN引脚
#define LCD_D4_PIN GPIO_Pin_12 // 连接到LCD的D4引脚
#define LCD_D5_PIN GPIO_Pin_13 // 连接到LCD的D5引脚
#define LCD_D6_PIN GPIO_Pin_14 // 连接到LCD的D6引脚
#define LCD_D7_PIN GPIO_Pin_15 // 连接到LCD的D7引脚
#define LCD_PORT GPIOC // 连接到LCD的引脚所在的GPIO端口
void LCD_Init(void)
{
// 使能GPIOC的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
// 配置LCD引脚为输出模式
GPIO_InitStructure.GPIO_Pin = LCD_RS_PIN | LCD_RW_PIN | LCD_EN_PIN | LCD_D4_PIN | LCD_D5_PIN | LCD_D6_PIN | LCD_D7_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LCD_PORT, &GPIO_InitStructure);
// 初始化LCD
// 设置LCD为8位数据总线
LCD_WriteCommand(0x38);
// 设置显示行数和字体大小
LCD_WriteCommand(0x0C);
// 清屏
LCD_WriteCommand(0x01);
// 设置写入显示数据的地址
LCD_WriteCommand(0x80);
}
void LCD_WriteCommand(uint8_t command)
{
// 设置RS为低电平,表示写入命令
GPIO_ResetBits(LCD_PORT, LCD_RS_PIN);
// 设置RW为低电平,表示写入命令
GPIO_ResetBits(LCD_PORT, LCD_RW_PIN);
// 将命令通过D4-D7引脚写入LCD模块
GPIO_WriteBits(LCD_PORT, LCD_D4_PIN | LCD_D5_PIN | LCD_D6_PIN | LCD_D7_PIN, (command & 0xF0) >> 4);
// 发送使能脉冲使命令生效
GPIO_SetBits(LCD_PORT, LCD_EN_PIN);
delay_us(1);
GPIO_ResetBits(LCD_PORT, LCD_EN_PIN);
delay_us(1);
GPIO_WriteBits(LCD_PORT, LCD_D4_PIN | LCD_D5_PIN | LCD_D6_PIN | LCD_D7_PIN, command & 0x0F);
GPIO_SetBits(LCD_PORT, LCD_EN_PIN);
delay_us(1);
GPIO_ResetBits(LCD_PORT, LCD_EN_PIN);
delay_us(1);
}
void delay_us(uint32_t us)
{
us *= 8;
while (us--)
{
__NOP();
}
}
上述代码假设使用PC0-PC2、PC12-PC15引脚连接到LCD1602,并且已设置正确的时钟和引脚功能。LCD_Init()函数用于初始化LCD,LCD_WriteCommand()函数用于向LCD发送命令,delay_us()函数用于产生延时。
cursor = db.cursor() AttributeError: cursor
这个错误通常意味着你正在尝试访问一个不存在的属性或方法。在这种情况下,可能是因为你没有正确地初始化数据库连接或导入正确的模块。
请确保你已经正确地导入了数据库模块,如`import mysql.connector`或`import psycopg2`,这取决于你使用的数据库类型。
然后,确保你已经正确地建立了数据库连接,并且可以成功连接到数据库。这通常涉及到提供正确的主机名、用户名、密码和数据库名称等信息。
最后,确保你正在使用正确的语法来创建游标对象。对于大多数数据库模块,可以使用类似于`cursor = connection.cursor()`的语法来创建游标对象。
如果你仍然遇到问题,请提供更多的代码和错误信息,以便我能够更好地帮助你解决问题。
相关推荐
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)