解释typedef enum mg_soft_spi_state_t (*soft_read_io)(struct mg_soft_spi_mcu_t* io,enum mg_soft_spi_state_t* read_data);
时间: 2023-08-15 12:06:55 浏览: 57
这段代码是一个函数指针的声明。让我解释一下具体的含义:
typedef enum mg_soft_spi_state_t (*soft_read_io)(struct mg_soft_spi_mcu_t* io, enum mg_soft_spi_state_t* read_data);
- typedef: 这个关键字用于给一个已存在的类型起一个新的名字。
- enum mg_soft_spi_state_t: 这是一个枚举类型,表示了某种软件SPI状态。
- (*soft_read_io): 这是函数指针的声明,soft_read_io 是函数指针的名称。它指向一个函数,该函数接受两个参数:一个指向 struct mg_soft_spi_mcu_t 类型的指针 io,一个指向 enum mg_soft_spi_state_t 类型的指针 read_data。该函数返回一个 enum mg_soft_spi_state_t 类型的值。
所以,这个声明定义了一个名为 soft_read_io 的函数指针类型,它可以指向具有特定参数和返回类型的函数。你可以用这个函数指针类型来声明变量,然后将其指向相应的函数,以便在程序中调用该函数。
相关问题
spi_parameter_struct spi_init_sruct初始化spi的功能
根据提供的引用内容,没有直接回答spi_parameter_struct spi_init_sruct初始化spi的方法。但是,我们可以根据提供的内容了解到一些与spi初始化相关的知识点。下面是一些与spi初始化相关的知识点:
1. 在使用SPI之前,需要先初始化SPI控制器。SPI控制器的初始化通常包括以下几个方面:SPI时钟的配置、SPI模式的配置、SPI数据位宽的配置、SPI NSS信号的配置等。
2. 在STM32中,SPI的初始化可以通过spi_parameter_struct结构体来完成。spi_parameter_struct结构体中包含了SPI控制器的各种配置参数,例如SPI的工作模式、数据位宽、时钟分频系数等。
3. spi_init函数可以用来初始化SPI控制器。spi_init函数的原型如下所示:
```c
void spi_init(SPI_TypeDef* SPIx, spi_parameter_struct* init_struct);
```
其中,第一个参数SPIx表示要初始化的SPI控制器,第二个参数init_struct是一个指向spi_parameter_struct结构体的指针,用于指定SPI控制器的各种配置参数。
4. 下面是一个使用spi_init函数初始化SPI控制器的例子:
```c
spi_parameter_struct spi_init_struct;
spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX;
spi_init_struct.device_mode = SPI_MASTER;
spi_init_struct.frame_size = SPI_FRAMESIZE_8BIT;
spi_init_struct.nss = SPI_NSS_SOFT;
spi_init_struct.clock_polarity_phase = SPI_CK_PL_LOW_PH_1EDGE;
spi_init_struct.prescale = SPI_PSC_32;
spi_init(SPI1, &spi_init_struct);
```
在这个例子中,我们首先定义了一个spi_parameter_struct类型的结构体变量spi_init_struct,并对其各个成员进行了赋值。然后,我们调用spi_init函数来初始化SPI1控制器。
typedef enum associativity_way ASSOC; typedef enum replacement_way REPLACE; typedef enum write_way WRITE;
These lines of code declare three enumeration types: ASSOC, REPLACE, and WRITE.
The ASSOC enumeration type represents the possible ways to associate a cache block with a set in a cache memory. Examples include direct mapping, set-associative mapping, and fully-associative mapping.
The REPLACE enumeration type represents the possible ways to replace a cache block in a set when the set is full and a new block needs to be inserted. Examples include least recently used (LRU), first-in first-out (FIFO), and random replacement.
The WRITE enumeration type represents the possible ways to handle a write operation to a cache block. Examples include write-through (updating both the cache and the main memory) and write-back (updating only the cache and later writing the changes to the main memory when the block is replaced).