PM: ERROR: DalAdc_GetAdcInputProperties result: -1

根据错误信息，"DalAdc_GetAdcInputProperties" 函数的返回值为 -1，这表示函数调用出现了错误。通常情况下，函数的返回值为负数表示出现了错误或者异常情况。

要解决这个问题，您可以考虑以下几个步骤：

1. 检查函数参数：确保您正确传递了函数所需的参数。检查参数的类型、值范围和格式是否符合函数的要求。

2. 检查硬件连接：如果函数需要与硬件设备进行交互，确保硬件设备正确连接并且处于正常工作状态。检查物理连接、电源供应以及信号线是否正常。

3. 检查驱动程序或库文件：确保您使用的驱动程序或者库文件是正确的版本，并且已经正确地安装或者配置。有时，错误可能是由于不兼容的驱动程序版本或者库文件引起的。

4. 查阅文档和示例代码：仔细阅读相关文档和示例代码，了解函数的使用方法和限制条件。文档中可能包含了特定错误代码的解释或者解决方案。

如果以上步骤仍然无法解决问题，建议您联系相关技术支持或者开发人员，以获取更详细的帮助和指导。他们可能能够提供针对特定错误代码的解决方案或者进一步的调试建议。

相关问题

帮我把下列代码的PM_XXX内容和 WORK_XXX 内容的位置进行调换 switch (nThirdStepMode) { case PM_UNKNOWN_MODE: { // 无法识别的第三方工步号 return false; } break; case PM_STEP_REST: { nStepMode = WORK_HOLD; } break; case PM_STEP_RANDOM_REST: { nStepMode = WORK_HOLD_RANDOM; } break; case PM_STEP_SYN_SUSPEND: { // 无法识别的第三方工步号 return false; } break; case PM_STEP_PAUSE: { nStepMode = WORK_PAUSE; } break; case PM_STEP_STOP_X: { // 无法识别的第三方工步号 return false; } break; case PM_CONST_POWER_CHARGE: { nStepMode = WORK_CP; } break; case PM_CONST_POWER_DISCHARGE: { nStepMode = WORK_DP; } break; case PM_CONST_RESISTANCE_CHARGE: { nStepMode = WORK_CR; } break; case PM_CONST_RESISTANCE_DISCHARGE: { nStepMode = WORK_DR; } break; case PM_STEP_INCUBATOR_LINK: { // TODO:处理 温箱联动 return false; } break; case PM_CONST_CURRENT_CHARGE: { nStepMode = WORK_CC; } break; case PM_CONST_CURRENT_DISCHARGE: { nStepMode = WORK_DC; } break; case PM_STEP_C_RATE_CHARGE: { nStepMode = WORK_CRATE; } break; case PM_STEP_C_RATE_DISCHARGE: { nStepMode = WORK_DRATE; } break; case PM_STEP_CCCV_CHARGE: // carefully! { nStepMode = WORK_CCCV; } break; case PM_STEP_CCCV_DISCHARGE: // carefully! { nStepMode = WORK_DCDV; } break; case PM_CONST_VOLT_CHARGE: { nStepMode = WORK_CV; } break; case PM_CONST_VOLT_DISCHARGE: // support lmtPara from V7206 { nStepMode = WORK_DV; } break; case PM_STEP_RATE_CV_CHARGE: { nStepMode = WORK_CRATECV; } break; case PM_STEP_RATE_CV_DISCHARGE: { nStepMode = WORK_DRATEDV; } break; case PM_STEP_CPCV_CHARGE: { nStepMode = WORK_CPCV; } break; case PM_STEP_CPCV_DISCHARGE: { nStepMode = WORK_DPDV; } break; case PM_STEP_LOOP: { nStepMode = WORK_WHILE; } break; default: { // 无法识别的第三方工步号 return false; } break; }

调换后的代码如下：

switch (nThirdStepMode) 
{
    case WORK_HOLD:
    {
        nStepMode = PM_STEP_REST;
    } 
    break;  
    
    case WORK_HOLD_RANDOM:
    {
        nStepMode = PM_STEP_RANDOM_REST;
    } 
    break;
    
    case WORK_PAUSE:
    {
        nStepMode = PM_STEP_PAUSE;
    } 
    break;
    
    case WORK_CP:
    {
        nStepMode = PM_CONST_POWER_CHARGE;
    } 
    break;
    
    case WORK_DP:
    {
        nStepMode = PM_CONST_POWER_DISCHARGE;
    } 
    break;
    
    case WORK_CR:
    {
        nStepMode = PM_CONST_RESISTANCE_CHARGE;
    } 
    break;
    
    case WORK_DR:
    {
        nStepMode = PM_CONST_RESISTANCE_DISCHARGE;
    } 
    break;
    
    case WORK_CC:
    {
        nStepMode = PM_CONST_CURRENT_CHARGE;
    } 
    break;
    
    case WORK_DC:
    {
        nStepMode = PM_CONST_CURRENT_DISCHARGE;
    } 
    break;
    
    case WORK_CRATE:
    {
        nStepMode = PM_STEP_C_RATE_CHARGE;
    } 
    break;
    
    case WORK_DRATE:
    {
        nStepMode = PM_STEP_C_RATE_DISCHARGE;
    } 
    break;
    
    case WORK_CCCV:
    {
        nStepMode = PM_STEP_CCCV_CHARGE;
    } 
    break;
    
    case WORK_DCDV:
    {
        nStepMode = PM_STEP_CCCV_DISCHARGE;
    } 
    break;
    
    case WORK_CV:
    {
        nStepMode = PM_CONST_VOLT_CHARGE;
    } 
    break;
    
    case WORK_DV:
    {
        nStepMode = PM_CONST_VOLT_DISCHARGE;
    } 
    break;
    
    case WORK_CRATECV:
    {
        nStepMode = PM_STEP_RATE_CV_CHARGE;
    } 
    break;
    
    case WORK_DRATEDV:
    {
        nStepMode = PM_STEP_RATE_CV_DISCHARGE;
    } 
    break;
    
    case WORK_CPCV:
    {
        nStepMode = PM_STEP_CPCV_CHARGE;
    } 
    break;
    
    case WORK_DPDV:
    {
        nStepMode = PM_STEP_CPCV_DISCHARGE;
    } 
    break;
    
    case WORK_WHILE:
    {
        nStepMode = PM_STEP_LOOP;
    } 
    break;
    
    case PM_UNKNOWN_MODE:
    case PM_STEP_SYN_SUSPEND:
    case PM_STEP_STOP_X:
    default:
    {
        // 无法识别的第三方工步号 
        return false;
    }
    break;
}

帮我把下列代码的case后内容和 “nStepMode =” 后的内容进行调换 switch (nThirdStepMode) { case PM_UNKNOWN_MODE: { // 无法识别的第三方工步号 return false; } break; case PM_STEP_REST: { nStepMode = WORK_HOLD; } break; case PM_STEP_RANDOM_REST: { nStepMode = WORK_HOLD_RANDOM; } break; case PM_STEP_SYN_SUSPEND: { // 无法识别的第三方工步号 return false; } break; case PM_STEP_PAUSE: { nStepMode = WORK_PAUSE; } break; case PM_STEP_STOP_X: { // 无法识别的第三方工步号 return false; } break; case PM_CONST_POWER_CHARGE: { nStepMode = WORK_CP; } break; case PM_CONST_POWER_DISCHARGE: { nStepMode = WORK_DP; } break; case PM_CONST_RESISTANCE_CHARGE: { nStepMode = WORK_CR; } break; case PM_CONST_RESISTANCE_DISCHARGE: { nStepMode = WORK_DR; } break; case PM_STEP_INCUBATOR_LINK: { // TODO:处理 温箱联动 return false; } break; case PM_CONST_CURRENT_CHARGE: { nStepMode = WORK_CC; } break; case PM_CONST_CURRENT_DISCHARGE: { nStepMode = WORK_DC; } break; case PM_STEP_C_RATE_CHARGE: { nStepMode = WORK_CRATE; } break; case PM_STEP_C_RATE_DISCHARGE: { nStepMode = WORK_DRATE; } break; case PM_STEP_CCCV_CHARGE: // carefully! { nStepMode = WORK_CCCV; } break; case PM_STEP_CCCV_DISCHARGE: // carefully! { nStepMode = WORK_DCDV; } break; case PM_CONST_VOLT_CHARGE: { nStepMode = WORK_CV; } break; case PM_CONST_VOLT_DISCHARGE: // support lmtPara from V7206 { nStepMode = WORK_DV; } break; case PM_STEP_RATE_CV_CHARGE: { nStepMode = WORK_CRATECV; } break; case PM_STEP_RATE_CV_DISCHARGE: { nStepMode = WORK_DRATEDV; } break; case PM_STEP_CPCV_CHARGE: { nStepMode = WORK_CPCV; } break; case PM_STEP_CPCV_DISCHARGE: { nStepMode = WORK_DPDV; } break; case PM_STEP_LOOP: { nStepMode = WORK_WHILE; } break; default: { // 无法识别的第三方工步号 return false; } break; }

调换后的代码如下所示：

switch (nThirdStepMode) {
	case PM_UNKNOWN_MODE:
		// 无法识别的第三方工步号
		return false;
		break;
	case PM_STEP_REST:
		nStepMode = WORK_HOLD;
		break;
	case PM_STEP_RANDOM_REST:
		nStepMode = WORK_HOLD_RANDOM;
		break;
	case PM_STEP_SYN_SUSPEND:
		// 无法识别的第三方工步号
		return false;
		break;
	case PM_STEP_PAUSE:
		nStepMode = WORK_PAUSE;
		break;
	case PM_STEP_STOP_X:
		// 无法识别的第三方工步号
		return false;
		break;
	case PM_CONST_POWER_CHARGE:
		nStepMode = WORK_CP;
		break;
	case PM_CONST_POWER_DISCHARGE:
		nStepMode = WORK_DP;
		break;
	case PM_CONST_RESISTANCE_CHARGE:
		nStepMode = WORK_CR;
		break;
	case PM_CONST_RESISTANCE_DISCHARGE:
		nStepMode = WORK_DR;
		break;
	case PM_STEP_INCUBATOR_LINK:
		// TODO:处理 温箱联动
		return false;
		break;
	case PM_CONST_CURRENT_CHARGE:
		nStepMode = WORK_CC;
		break;
	case PM_CONST_CURRENT_DISCHARGE:
		nStepMode = WORK_DC;
		break;
	case PM_STEP_C_RATE_CHARGE:
		nStepMode = WORK_CRATE;
		break;
	case PM_STEP_C_RATE_DISCHARGE:
		nStepMode = WORK_DRATE;
		break;
	case PM_STEP_CCCV_CHARGE:
		nStepMode = WORK_CCCV;
		break;
	case PM_STEP_CCCV_DISCHARGE:
		nStepMode = WORK_DCDV;
		break;
	case PM_CONST_VOLT_CHARGE:
		nStepMode = WORK_CV;
		break;
	case PM_CONST_VOLT_DISCHARGE:
		nStepMode = WORK_DV;
		break;
	case PM_STEP_RATE_CV_CHARGE:
		nStepMode = WORK_CRATECV;
		break;
	case PM_STEP_RATE_CV_DISCHARGE:
		nStepMode = WORK_DRATEDV;
		break;
	case PM_STEP_CPCV_CHARGE:
		nStepMode = WORK_CPCV;
		break;
	case PM_STEP_CPCV_DISCHARGE:
		nStepMode = WORK_DPDV;
		break;
	case PM_STEP_LOOP:
		nStepMode = WORK_WHILE;
		break;
	default:
		// 无法识别的第三方工步号
		return false;
		break;
}