stm32pc13led代码
时间: 2023-08-13 10:05:45 浏览: 50
好的,以下是一个简单的使用STM32的PC13引脚控制LED灯的代码示例:
```c
#include "stm32f4xx.h"
void delay_ms(uint32_t ms) {
for (volatile uint32_t i = 0; i < ms * 1000; ++i) {
// 延时
}
}
int main(void) {
// 使能GPIOC时钟
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
// 配置PC13为推挽输出模式
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOC, &GPIO_InitStructure);
while (1) {
// 点亮LED
GPIO_SetBits(GPIOC, GPIO_Pin_13);
delay_ms(1000);
// 关闭LED
GPIO_ResetBits(GPIOC, GPIO_Pin_13);
delay_ms(1000);
}
}
```
这段代码使用了STM32F4系列微控制器,使用GPIOC的PC13引脚控制LED。代码中的`delay_ms`函数用于延时一定的毫秒数。在主函数中,首先使能了GPIOC的时钟,然后配置PC13引脚为推挽输出模式。接下来,在一个无限循环中,先点亮LED,延时1秒,然后关闭LED,再延时1秒,如此往复。
请注意,这只是一个简单的示例代码,实际使用时可能需要根据具体的硬件平台和使用的STM32系列微控制器进行适当的修改。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)