51单片机使用串口通信按字节发送
时间: 2023-09-01 11:11:55 浏览: 53
在51单片机中,可以使用UART来实现串口通信。下面是按字节发送的示例代码:
```c
#include <reg51.h>
void uart_init(void)
{
TMOD = 0x20; // 设置定时器1为模式2
SCON = 0x50; // 设置串口为模式1
TH1 = 0xFD; // 设置波特率为9600(晶振为11.0592M)
TR1 = 1; // 启动定时器1
}
void uart_send_byte(unsigned char byte)
{
SBUF = byte; // 将要发送的字节放入发送缓冲区
while (!TI); // 等待发送完成
TI = 0; // 清除发送完成标志
}
void main(void)
{
uart_init(); // 初始化串口
while (1)
{
uart_send_byte(0x5A); // 发送一个字节
}
}
```
在上面的代码中,首先通过`uart_init()`函数来初始化串口,设置波特率为9600。然后在`uart_send_byte()`函数中,将要发送的字节放入发送缓冲区,并等待发送完成。最后在`main()`函数中,不断地调用`uart_send_byte()`函数来发送字节。
相关问题
51单片机串口发送数据
51单片机的串口发送数据需要使用串口通信相关的寄存器和函数。下面是一个简单的例子,演示如何使用51单片机的串口发送数据:
```c
#include <reg51.h>
void UART_Init() {
TMOD = 0x20; // 设置计数器1为模式2
TH1 = 0xFD; // 设置波特率为9600(11059200/12/32/9600=30.5)
SCON = 0x50; // 设置串口为工作方式1
TR1 = 1; // 启动计数器1
}
void UART_Send(char dat) {
SBUF = dat; // 将待发送的数据存入发送缓冲区
while (!TI); // 等待发送完成
TI = 0; // 发送完成后清除标志位
}
void main() {
UART_Init(); // 初始化串口
while (1) {
UART_Send('H');
UART_Send('e');
UART_Send('l');
UART_Send('l');
UART_Send('o');
UART_Send('\n');
}
}
```
在上述代码中,UART_Init() 函数用于初始化串口,设置波特率和工作方式等参数;UART_Send(char dat) 函数用于发送一个字节的数据,将待发送的数据存入发送缓冲区,等待发送完成后清除标志位。在 main() 函数中,不断调用 UART_Send() 函数发送数据。
请注意,上述代码仅仅是一个简单的演示,实际应用中需要根据具体的需求进行修改和优化。同时,由于串口通信涉及到硬件和软件的复杂交互过程,需要对单片机和串口通信有一定的了解。
openmv怎样与51单片机进行串口通信
要实现OpenMV与51单片机之间的串口通信,需要先确定串口通信的参数,如波特率、数据位、停止位、校验位等。然后在OpenMV的代码中使用`uart`模块进行串口通信。具体步骤如下:
1.在OpenMV的代码中导入`uart`模块:
```python
import uart
```
2.设置串口通信的参数,比如波特率为9600,数据位为8位,无校验位,停止位为1位:
```python
uart_baudrate = 9600
uart_data_bits = 8
uart_parity = None
uart_stop_bits = 1
```
3.打开串口:
```python
uart_port = uart.UART(3, baudrate=uart_baudrate, bits=uart_data_bits, parity=uart_parity, stop=uart_stop_bits)
uart_port.init(uart_baudrate, bits=uart_data_bits, parity=uart_parity, stop=uart_stop_bits)
```
其中,`uart_port`是串口对象,`3`表示使用第3个串口,根据具体情况可自行修改。
4.使用`uart_port.write()`方法发送数据:
```python
uart_port.write("hello")
```
5.使用`uart_port.read()`方法接收数据:
```python
data = uart_port.read(8) # 读取8个字节的数据
```
以上是OpenMV的代码部分,接下来是51单片机的代码部分。
1.在51单片机的代码中,需要先设置串口通信的参数和波特率:
```c
TMOD = 0x20; // 设置为定时器1的方式2,允许自动重装载
TH1 = 0xfd; // 波特率为9600,时钟频率为11.0592MHz
TL1 = 0xfd;
```
2.打开串口:
```c
TR1 = 1; // 启动定时器1
ES = 1; // 开启串口中断
EA = 1; // 开启总中断
```
3.使用中断方式接收数据:
```c
void uart() interrupt 4
{
if (RI)
{
RI = 0; // 清除接收中断标志位
buf[buf_index++] = SBUF; // 保存接收到的数据
if (buf_index >= BUF_LEN)
{
buf_index = 0; // 缓冲区已满,重置缓冲区索引
}
}
if (TI)
{
TI = 0; // 清除发送中断标志位
busy = 0; // 发送完成
}
}
```
其中,`buf`是接收缓冲区,`buf_index`是缓冲区索引,`BUF_LEN`是缓冲区长度,`busy`表示发送是否完成。
4.使用`SBUF`寄存器发送数据:
```c
void send_data(char *data, int len)
{
int i;
for (i = 0; i < len; i++)
{
busy = 1; // 设置发送中标志位
SBUF = data[i]; // 发送数据
while (busy); // 等待发送完成
}
}
```
以上就是OpenMV与51单片机之间通过串口通信的基本步骤,具体实现还需要根据实际情况进行修改。
相关推荐
![application/x-rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)