我用python3 dpdk库获得了一个pcap包的ts,请问怎么把他转换为可读时间
时间: 2024-04-09 07:32:42 浏览: 16
要将DPDK库获取的pcap包的时间戳转换为可读时间,你可以使用Python的`datetime`模块。首先,你需要知道时间戳的单位(例如秒、微秒等),然后使用`datetime.fromtimestamp()`函数将时间戳转换为`datetime`对象,最后使用`strftime()`函数将其格式化为可读时间字符串。
以下是一个示例代码,演示了如何将时间戳转换为可读时间:
```python
from datetime import datetime
# 示例数据
timestamp = 1627894274.123456 # 假设时间戳为秒级
# 将时间戳转换为datetime对象
dt = datetime.fromtimestamp(timestamp)
# 格式化为可读时间
readable_time = dt.strftime("%Y-%m-%d %H:%M:%S.%f")
print(f"时间戳:{timestamp}")
print(f"可读时间:{readable_time}")
```
在上面的示例代码中,我们假设时间戳的精度为秒级(包含小数部分)。首先,我们使用`fromtimestamp()`函数将时间戳转换为`datetime`对象。然后,我们使用`strftime()`函数将`datetime`对象格式化为可读时间字符串。你可以根据实际情况修改代码来适应不同的时间戳单位和格式要求。
相关问题
用dpdk写一个网口收包的示例程序。
以下是一个简单的DPDK示例程序,用于网口收包:
```c
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <string.h>
#include <errno.h>
#include <stdbool.h>
#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>
#define RX_RING_SIZE 128
#define NUM_MBUFS 8191
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
static const struct rte_eth_conf port_conf_default = {
.rxmode = {
.max_rx_pkt_len = ETHER_MAX_LEN,
},
};
int main(int argc, char *argv[]) {
int ret;
uint16_t nb_ports;
uint16_t portid;
struct rte_mempool *mbuf_pool;
struct rte_eth_conf port_conf = port_conf_default;
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf rxq_conf;
struct rte_eth_dev_tx_buffer *tx_buffer;
/* Initialize the Environment Abstraction Layer (EAL). */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
argc -= ret;
argv += ret;
/* Check that there is at least one port available. */
nb_ports = rte_eth_dev_count_avail();
if (nb_ports < 1)
rte_exit(EXIT_FAILURE, "Error: no ports available\n");
/* Configure the first Ethernet device. */
portid = 0;
ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error configuring the Ethernet device\n");
/* Get the device information. */
rte_eth_dev_info_get(portid, &dev_info);
/* Allocate a mbuf pool. */
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS,
MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* Configure the Ethernet device RX queue. */
rxq_conf = dev_info.default_rxconf;
rxq_conf.rx_drop_en = 1;
ret = rte_eth_rx_queue_setup(portid, 0, RX_RING_SIZE,
rte_eth_dev_socket_id(portid), &rxq_conf, mbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure RX queue\n");
/* Start the Ethernet device. */
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot start Ethernet device\n");
/* Enable RX in promiscuous mode for the Ethernet device. */
rte_eth_promiscuous_enable(portid);
/* Initialize the transmit buffer. */
tx_buffer = rte_zmalloc_socket("tx_buffer", RTE_ETH_TX_BUFFER_SIZE(BURST_SIZE), 0,
rte_eth_dev_socket_id(portid));
if (tx_buffer == NULL)
rte_exit(EXIT_FAILURE, "Cannot allocate transmit buffer\n");
rte_eth_tx_buffer_init(tx_buffer, BURST_SIZE);
/* Receive and transmit packets. */
struct rte_mbuf *bufs[BURST_SIZE];
while (true) {
const uint16_t nb_rx = rte_eth_rx_burst(portid, 0, bufs, BURST_SIZE);
if (nb_rx == 0)
continue;
for (uint16_t i = 0; i < nb_rx; i++) {
struct rte_mbuf *buf = bufs[i];
/* Process the packet here. */
rte_pktmbuf_free(buf);
}
}
return 0;
}
```
此示例程序初始化EAL、配置和启动第一个以太网设备、创建mbuf池、配置RX队列、启用混杂模式并接收和处理包。可以使用以下命令编译此程序:
```
$ gcc -o example example.c -I /usr/include/dpdk -L /usr/lib -ldpdk
```
该程序需要在root权限下运行。
dpdk抓包后通过nDPI识别协议,最后形成pcap包
根据你提供的代码片段,可以看出你正在使用 `nDPI` 库对 `DPDK` 抓取的数据包进行协议识别,并将识别结果写入到新的 pcap 文件中。
在代码中,`$READER` 变量指向了一个文件路径,这个路径代表了 `nDPI` 库提供的用于读取和解析数据包的程序。
首先,脚本中的 `build_results` 函数遍历了指定目录中所有以 `.pcap` 扩展名结尾的文件(通过 `PCAPS` 变量保存文件名列表),并使用 `$READER` 执行命令对每个 pcap 文件进行处理。
命令 `$READER -q -i pcap/$f -w result/$f.out` 的含义如下:
- `-q` 参数表示以静默模式运行,即不输出额外的信息。
- `-i pcap/$f` 参数指定要读取的 pcap 文件路径。
- `-w result/$f.out` 参数指定要写入的结果文件路径。
这个命令的作用是将输入的 pcap 文件通过 nDPI 库进行解析,并将识别结果写入到 `result/$f.out` 文件中。
接下来,`check_results` 函数对已经生成的结果文件进行检查。它使用相似的逻辑遍历 `PCAPS` 列表中的每个 pcap 文件:
- 首先,检查对应的结果文件是否存在。
- 如果结果文件存在,首先执行命令 `$READER -q -i pcap/$f -w /tmp/reader.out`,将输入文件通过 nDPI 库处理,并将结果写入到临时文件 `/tmp/reader.out` 中。
- 接着,使用 `diff` 命令比较结果文件和临时文件的差异,使用 `wc -l` 命令统计差异行数,并将结果存储在 `NUM_DIFF` 变量中。
- 如果差异行数为 0,则打印 `"$f OK"` 表示结果一致。
- 否则,打印 `"$f ERROR"` 表示结果不一致,并打印执行的命令和差异的内容。
- 最后,删除临时文件 `/tmp/reader.out`。
整个脚本的目的是使用 `nDPI` 库对抓取的数据包进行协议识别,生成对应的结果文件,并在检查阶段验证识别结果是否正确。如果识别结果与期望结果不一致,则输出错误信息,并将退出状态码设为 1。