帮我写一个基于51单片机的浮点数拆分,比大小和lcd显示的程序
时间: 2024-03-09 19:51:14 浏览: 14
以下是一个基于 51 单片机的浮点数拆分、比大小和 LCD 显示的程序:
```c
#include <reg51.h>
#include <stdio.h>
#define LCD_DB P2 // LCD 数据口
sbit LCD_E = P3^5; // LCD 使能端口
sbit LCD_RS = P3^6; // LCD 命令/数据选择端口
// 延时函数,用于 LCD 显示
void delay() {
int i, j;
for (i = 0; i < 10; i++) {
for (j = 0; j < 500; j++);
}
}
// LCD 初始化函数
void lcd_init() {
LCD_RS = 0;
LCD_E = 0;
LCD_DB = 0x38;
LCD_E = 1;
delay();
LCD_E = 0;
delay();
LCD_DB = 0x0C;
LCD_E = 1;
delay();
LCD_E = 0;
delay();
LCD_DB = 0x06;
LCD_E = 1;
delay();
LCD_E = 0;
delay();
}
// LCD 显示函数
void lcd_display(char *str) {
while (*str) {
LCD_RS = 1;
LCD_DB = *str++;
LCD_E = 1;
delay();
LCD_E = 0;
delay();
}
}
// 浮点数拆分函数
void float_split(float f, int *sign, int *exponent, unsigned int *mantissa) {
int *p = (int *)&f;
// 拆分符号、指数和尾数
*sign = (*p >> 31) & 1;
*exponent = ((*p >> 23) & 0xFF) - 127;
*mantissa = (*p & 0x007FFFFF) | 0x00800000;
}
// 浮点数比较函数
int float_compare(float f1, float f2) {
int sign1, sign2, exponent1, exponent2;
unsigned int mantissa1, mantissa2;
// 拆分两个浮点数
float_split(f1, &sign1, &exponent1, &mantissa1);
float_split(f2, &sign2, &exponent2, &mantissa2);
// 比较符号、指数和尾数
if (sign1 != sign2) {
return sign1 - sign2;
} else if (exponent1 != exponent2) {
return exponent1 - exponent2;
} else {
return mantissa1 - mantissa2;
}
}
int main() {
float f1, f2;
int sign1, exponent1, sign2, exponent2;
unsigned int mantissa1, mantissa2;
// 初始化 LCD
lcd_init();
// 输入两个浮点数
printf("Enter two floating-point numbers: ");
scanf("%f %f", &f1, &f2);
// 拆分两个浮点数
float_split(f1, &sign1, &exponent1, &mantissa1);
float_split(f2, &sign2, &exponent2, &mantissa2);
// 比较两个浮点数的大小
if (float_compare(f1, f2) < 0) {
lcd_display("f1 < f2");
} else if (float_compare(f1, f2) > 0) {
lcd_display("f1 > f2");
} else {
lcd_display("f1 = f2");
}
return 0;
}
```
该程序首先会让用户输入两个浮点数,然后将它们拆分成符号、指数和尾数三部分,并比较它们的大小,最后将结果通过 LCD 显示出来。
在程序中,`float_split()` 函数用于拆分一个浮点数,将其符号、指数和尾数分别存储在三个变量中;`float_compare()` 函数用于比较两个浮点数的大小,返回值为负数表示第一个浮点数小于第二个浮点数,返回值为正数表示第一个浮点数大于第二个浮点数,返回值为零表示两个浮点数相等。而 LCD 的初始化和显示函数则是通过写入相应的命令和数据到 LCD 的数据口和控制口实现的。