STM32C8T6写DS18B20
时间: 2024-05-16 17:09:58 浏览: 27
STM32C8T6是一种基于ARM Cortex-M内核的微控制器,它支持多种接口和通信协议,其中包括DS18B20数字温度传感器的接口。DS18B20是一种数字温度传感器,它采用单总线接口(One-Wire)通信协议,并可以直接与STM32C8T6进行连接。以下是DS18B20与STM32C8T6的接口步骤:
1. 配置GPIO口:选择一个GPIO口作为DS18B20的总线口,通过STM32C8T6的寄存器设置该GPIO口的输出状态和上拉电阻使其变成一个上拉电平的输出端口。
2. 发送初始化序列:发送一个复位脉冲和一个读写命令,以进入DS18B20的工作模式。
3. 发送读取温度命令:向DS18B20发送读取温度的命令,以让其开始工作并开始转换温度。
4. 读取温度值:在DS18B20完成温度转换之后,STM32C8T6需要从总线上读取DS18B20传来的温度值,并将其转换为实际温度值。
下面是一个示例代码,演示如何使用STM32C8T6读取DS18B20传感器的温度数据:
```
#include "stm32f10x.h"
#include "delay.h"
#define GPIO_DS18B20 GPIOA
#define PIN_DS18B20 GPIO_Pin_0
void DS18B20_Init(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = PIN_DS18B20;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIO_DS18B20, &GPIO_InitStructure);
GPIO_SetBits(GPIO_DS18B20, PIN_DS18B20);
delay_us(500);
}
void DS18B20_WriteBit(uint8_t bit)
{
GPIO_ResetBits(GPIO_DS18B20, PIN_DS18B20);
delay_us(2);
if (bit) {
GPIO_SetBits(GPIO_DS18B20, PIN_DS18B20);
}
delay_us(60);
GPIO_SetBits(GPIO_DS18B20, PIN_DS18B20);
}
uint8_t DS18B20_ReadBit(void)
{
uint8_t bit = 0;
GPIO_ResetBits(GPIO_DS18B20, PIN_DS18B20);
delay_us(2);
GPIO_SetBits(GPIO_DS18B20, PIN_DS18B20);
delay_us(15);
bit = GPIO_ReadInputDataBit(GPIO_DS18B20, PIN_DS18B20);
delay_us(45);
return bit;
}
void DS18B20_WriteByte(uint8_t byte)
{
for (uint8_t i = 0; i < 8; i++) {
DS18B20_WriteBit(byte & 0x01);
byte >>= 1;
}
}
uint8_t DS18B20_ReadByte(void)
{
uint8_t byte = 0;
for (uint8_t i = 0; i < 8; i++) {
byte >>= 1;
byte |= (DS18B20_ReadBit() << 7);
}
return byte;
}
void DS18B20_Start(void)
{
DS18B20_Init();
DS18B20_WriteByte(0xCC); // Skip ROM
DS18B20_WriteByte(0x44); // Start conversion
}
float DS18B20_ReadTemperature(void)
{
uint16_t raw_temperature = 0;
float temperature = 0.0f;
DS18B20_Init();
DS18B20_WriteByte(0xCC); // Skip ROM
DS18B20_WriteByte(0xBE); // Read scratchpad
raw_temperature |= DS18B20_ReadByte();
raw_temperature |= (DS18B20_ReadByte() << 8);
temperature = (float)(raw_temperature >> 4) * 0.0625f;
return temperature;
}
int main(void)
{
float temperature = 0.0f;
while (1) {
DS18B20_Start();
delay_ms(1000);
temperature = DS18B20_ReadTemperature();
printf("Temperature: %f\n", temperature);
//相关问题:
//1. 如何使用STM32C8T6读取其他数字传感器?
//2. 如何在STM32C8T6上实现一次性读取多个DS18B20传感器的温度数据?
//3. 如何在STM32C8T6上实现对DS18B20传感器的精确温度控制?
}
}
```
在以上代码中,`DS18B20_Init`函数用于初始化DS18B20总线口,`DS18B20_WriteBit`和`DS18B20_ReadBit`函数用于写入和读取总线上的单个位数据,`DS18B20_WriteByte`和`DS18B20_ReadByte`函数用于写入和读取总线上的单个字节数据,`DS18B20_Start`函数用于向DS18B20发送读取温度的命令,`DS18B20_ReadTemperature`函数用于从总线上读取DS18B20传来的温度数据并计算实际温度值。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)