帮我写一个stm32f407寄存器版串口通信接收程序
时间: 2023-11-29 10:05:16 浏览: 31
当然可以帮你写一个基于STM32F407寄存器的串口通信接收程序。以下是一个简单的示例代码:
```c
#include "stm32f4xx.h"
void USART2_Init(void)
{
// 使能USART2和GPIOA的时钟
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// 配置USART2的引脚
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3; // PA2: USART2_TX, PA3: USART2_RX
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 将引脚连接到USART2
GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_USART2); // TX
GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_USART2); // RX
// 配置USART2
USART_InitTypeDef USART_InitStruct;
USART_InitStruct.USART_BaudRate = 9600; // 波特率为9600
USART_InitStruct.USART_WordLength = USART_WordLength_8b; // 数据位为8位
USART_InitStruct.USART_StopBits = USART_StopBits_1; // 停止位为1位
USART_InitStruct.USART_Parity = USART_Parity_No; // 无奇偶校验
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 无硬件流控制
USART_InitStruct.USART_Mode = USART_Mode_Rx; // 接收模式
USART_Init(USART2, &USART_InitStruct);
// 使能USART2接收中断
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
// 使能USART2
USART_Cmd(USART2, ENABLE);
}
void USART2_IRQHandler(void)
{
if (USART_GetITStatus(USART2, USART_IT_RXNE) != RESET)
{
char receivedData = USART_ReceiveData(USART2); // 读取接收到的数据
// 处理接收到的数据
// ...
}
}
int main(void)
{
USART2_Init();
while (1)
{
// 主循环中可以进行其他操作
// ...
}
}
```
这个代码初始化了USART2串口,并启用了接收中断。当接收到数据时,在`USART2_IRQHandler`中进行处理,你可以根据实际需求进行数据的处理操作。
注意,这只是一个简单的示例代码,你需要根据具体的需求进行适当的修改和扩展。希望能对你有所帮助!
相关推荐
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)