如何用stm32f103实现音频变声处理,能提供相关的例程吗?
时间: 2023-05-13 12:04:45 浏览: 142
可以使用STM32F103的DAC和ADC模块来实现音频变声处理。具体实现方法可以使用数字信号处理算法,如快速傅里叶变换(FFT)和离散余弦变换(DCT)等。相关的例程可以在STM32官方网站和GitHub等开源社区中找到。
相关问题
CSDN上有stm32f103c8t6的串口中断例程吗?
是的,CSDN上有很多关于STM32F103C8T6的串口中断例程。你可以在CSDN上搜索“STM32F103C8T6 串口中断”来查找相关的例程。以下是一个简单的例程,可以在串口接收到数据时触发中断,并且在中断服务程序中将接收到的数据回传:
```c
#include "stm32f10x.h"
#include <stdio.h>
#define USARTx USART1
void USART_Configuration(void)
{
USART_InitTypeDef USART_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
/* Configure USART1 Rx (PA10) as input floating */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure USART1 Tx (PA9) as alternate function push-pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure USART1 */
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USARTx, &USART_InitStructure);
/* Enable USART1 Receive interrupt */
USART_ITConfig(USARTx, USART_IT_RXNE, ENABLE);
/* Configure and enable USART1 interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Enable USART1 */
USART_Cmd(USARTx, ENABLE);
}
void USART1_IRQHandler(void)
{
if (USART_GetITStatus(USARTx, USART_IT_RXNE) != RESET)
{
char received_char = USART_ReceiveData(USARTx);
USART_SendData(USARTx, received_char);
while (USART_GetFlagStatus(USARTx, USART_FLAG_TXE) == RESET);
USART_ClearITPendingBit(USARTx, USART_IT_RXNE);
}
}
int main(void)
{
USART_Configuration();
while (1)
{
// Do something else here
}
}
```
这个例程中,我们使用了USART1作为串口,配置了串口的GPIO引脚、波特率和中断。在中断服务函数中,我们读取了接收到的数据,并将其回传。您可以根据自己的需求修改此例程。
stm32f103vet6相关模块例程下载
要下载STM32F103VET6相关模块的例程,可以按照以下步骤进行:
1. 找到STM32官方网站(www.st.com)并进入其下载中心。在搜索框中输入“STM32F103VET6”,然后点击搜索按钮。
2. 在搜索结果中找到与该型号相关的MCU支持软件包(STM32Cube),并点击进入相关页面。
3. 在页面中找到软件包下载区域,选择合适的版本,然后点击下载按钮。
4. 下载完成后,解压缩下载的文件。在解压后的文件夹中,可以找到包含相关模块的例程。
5. 根据自己的需求选择合适的例程,并将其复制到开发环境中(如Keil、IAR等)。
6. 在开发环境中打开相应的例程,并根据需要进行配置或修改。
7. 编译、烧录、运行项目,即可在STM32F103VET6上实现相应的功能。
总结:要下载STM32F103VET6相关模块的例程,只需在STM32官方网站上搜索并下载相应的软件包(STM32Cube),然后从中提取出需要的例程进行开发使用。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)