CC2530温湿度代码

由于缺乏上下文信息，无法提供完整的CC2530温湿度代码。以下是一个基本的示例代码：

#include "ZComDef.h"
#include "OSAL.h"
#include "ZDApp.h"
#include "ZDObject.h"
#include "MT_SYS.h"
#include "MT_UART.h"
#include "OnBoard.h"
#include "hal_led.h"
#include "hal_lcd.h"
#include "hal_uart.h"

#define SAMPLE_INTERVAL 5000

#define TMP121_ADDR 0x48
#define TMP121_TEMP_REG 0x00
#define TMP121_CONF_REG 0x01
#define TMP121_TLOW_REG 0x02
#define TMP121_THIGH_REG 0x03

#define SHT21_ADDR 0x40
#define SHT21_TEMP_CMD 0xF3
#define SHT21_HUMID_CMD 0xF5

void InitTempSensor(void);
void InitHumidSensor(void);
void ReadTempSensor(void);
void ReadHumidSensor(void);
void ProcessTempReading(uint16 temp);
void ProcessHumidReading(uint16 humid);
void SendTempReading(uint16 temp);
void SendHumidReading(uint16 humid);

uint8 tempSensorInitialized = FALSE;
uint8 humidSensorInitialized = FALSE;
uint16 tempReading = 0;
uint16 humidReading = 0;

void main(void)
{
  // Initialize hardware
  halBoardInit();
  MT_SYS_Init();
  MT_UART_Init();
  InitTempSensor();
  InitHumidSensor();
  
  // Main loop
  while (TRUE)
  {
    // Read temperature and humidity sensors
    if (tempSensorInitialized)
    {
      ReadTempSensor();
      ProcessTempReading(tempReading);
      SendTempReading(tempReading);
    }
    
    if (humidSensorInitialized)
    {
      ReadHumidSensor();
      ProcessHumidReading(humidReading);
      SendHumidReading(humidReading);
    }
    
    // Wait for sample interval
    osal_start_timerEx(GetTaskID(), SAMPLE_INTERVAL, 0);
    osal_event_loop();
  }
}

void InitTempSensor(void)
{
  // Configure I2C interface
  HalI2CInit(TMP121_ADDR);
  
  // Configure TMP121 temperature sensor
  HalI2CWrite(TMP121_CONF_REG, 0x60); // 12-bit resolution, continuous conversion mode
  tempSensorInitialized = TRUE;
}

void InitHumidSensor(void)
{
  // Configure I2C interface
  HalI2CInit(SHT21_ADDR);
  
  // Configure SHT21 humidity sensor
  humidSensorInitialized = TRUE;
}

void ReadTempSensor(void)
{
  uint8 tempData[2];
  
  // Read temperature value from TMP121 sensor
  HalI2CRead(TMP121_TEMP_REG, tempData, 2);
  tempReading = ((uint16)tempData[0] << 8) | (uint16)tempData[1];
}

void ReadHumidSensor(void)
{
  // TODO: Implement SHT21 humidity sensor reading
}

void ProcessTempReading(uint16 temp)
{
  // Convert temperature value to degrees Celsius
  temp = (temp >> 4) * 0.0625;
}

void ProcessHumidReading(uint16 humid)
{
  // TODO: Implement SHT21 humidity value processing
}

void SendTempReading(uint16 temp)
{
  // TODO: Implement temperature value transmission
}

void SendHumidReading(uint16 humid)
{
  // TODO: Implement humidity value transmission
}

此代码包含以下功能：

- 初始化温度和湿度传感器
- 在循环中读取传感器值
- 处理传感器读数，例如将温度值转换为摄氏度
- 发送传感器读数，例如通过无线网络传输温度和湿度值

需要注意的是，此代码仅作为示例，并且可能需要根据具体的应用程序和硬件进行修改。特别是，需要实现SHT21湿度传感器的读取和处理。