[Place 30-575] Sub-optimal placement for a clock-capable IO pin and MMCM pair. If this sub optimal condition is acceptable for this design, you may use the CLOCK_DEDICATED_ROUTE constraint in the .xdc file to demote this message to a WARNING. However, the use of this override is highly discouraged. These examples can be used directly in the .xdc file to override this clock rule. < set_property CLOCK_DEDICATED_ROUTE BACKBONE [get_nets sys_clk_IBUF] > sys_clk_IBUF_inst (IBUF.O) is locked to IOB_X1Y74 instance_name/inst/mmcm_adv_inst (MMCME2_ADV.CLKIN1) is provisionally placed by clockplacer on MMCME2_ADV_X1Y2 The above error could possibly be related to other connected instances. Following is a list of all the related clock rules and their respective instances. Clock Rule: rule_mmcm_bufg Status: PASS Rule Description: An MMCM driving a BUFG must be placed on the same half side (top/bottom) of the device instance_name/inst/mmcm_adv_inst (MMCME2_ADV.CLKFBOUT) is provisionally placed by clockplacer on MMCME2_ADV_X1Y2 and instance_name/inst/clkf_buf (BUFG.I) is provisionally placed by clockplacer on BUFGCTRL_X0Y31

Based on the provided information, it seems that there is a sub-optimal placement for a clock-capable IO pin and MMCM pair in your design. If this condition is acceptable, you can use the CLOCK_DEDICATED_ROUTE constraint in the .xdc file to demote the message to a WARNING. However, using this override is highly discouraged.

To override this clock rule, you can add the following line in the .xdc file:

set_property CLOCK_DEDICATED_ROUTE BACKBONE [get_nets sys_clk_IBUF]

Please note that this error could possibly be related to other connected instances. The related clock rule "rule_mmcm_bufg" seems to be passing, but it's important to review all the clock rules and their respective instances to ensure proper placement.

If you have any further questions or need additional assistance, feel free to ask.