linux驱动st7789
时间: 2023-07-24 11:42:15 浏览: 223
ST7789是一款高度集成的液晶驱动芯片,适用于TFT液晶屏的驱动。在Linux操作系统中,可以通过编写驱动程序来控制ST7789芯片。
首先,需要在Linux内核中启用SPI支持和SPI设备驱动支持。然后,可以使用SPI接口来与ST7789芯片进行通信。在驱动程序中,需要定义SPI设备和GPIO引脚,并实现SPI传输函数。
以下是一个简单的ST7789驱动程序示例:
```c
#include <linux/module.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#define ST7789_CMD 0
#define ST7789_DATA 1
static struct spi_device *st7789_spi;
static struct gpio_chip st7789_gpio_chip;
static int st7789_write_cmd(struct spi_device *spi, u8 cmd)
{
int ret;
u8 tx_buf[] = { cmd };
struct spi_transfer t = {
.tx_buf = tx_buf,
.len = sizeof(tx_buf),
};
ret = spi_sync_transfer(spi, &t, 1);
if (ret < 0) {
dev_err(&spi->dev, "SPI transfer failed: %d\n", ret);
return ret;
}
return 0;
}
static int st7789_write_data(struct spi_device *spi, u8 *data, size_t len)
{
int ret;
u8 tx_buf[len + 1];
tx_buf[0] = ST7789_DATA;
memcpy(&tx_buf[1], data, len);
struct spi_transfer t = {
.tx_buf = tx_buf,
.len = sizeof(tx_buf),
};
ret = spi_sync_transfer(spi, &t, 1);
if (ret < 0) {
dev_err(&spi->dev, "SPI transfer failed: %d\n", ret);
return ret;
}
return 0;
}
static int st7789_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
return 0;
}
static int st7789_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
return gpio_direction_output(offset, value);
}
static int st7789_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return gpio_get_value(offset);
}
static void st7789_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
gpio_set_value(offset, value);
}
static int st7789_probe(struct spi_device *spi)
{
int ret;
st7789_spi = spi;
st7789_gpio_chip.label = "st7789";
st7789_gpio_chip.direction_input = st7789_gpio_direction_input;
st7789_gpio_chip.direction_output = st7789_gpio_direction_output;
st7789_gpio_chip.get = st7789_gpio_get;
st7789_gpio_chip.set = st7789_gpio_set;
st7789_gpio_chip.ngpio = 3;
ret = gpiochip_add(&st7789_gpio_chip);
if (ret < 0) {
dev_err(&spi->dev, "Failed to add GPIO chip: %d\n", ret);
return ret;
}
ret = st7789_write_cmd(spi, 0x28); // Display OFF
if (ret < 0)
return ret;
// ...
ret = st7789_write_cmd(spi, 0x29); // Display ON
if (ret < 0)
return ret;
return 0;
}
static int st7789_remove(struct spi_device *spi)
{
gpiochip_remove(&st7789_gpio_chip);
return 0;
}
static const struct of_device_id st7789_of_match[] = {
{ .compatible = "st,st7789" },
{},
};
MODULE_DEVICE_TABLE(of, st7789_of_match);
static struct spi_driver st7789_spi_driver = {
.probe = st7789_probe,
.remove = st7789_remove,
.driver = {
.name = "st7789",
.of_match_table = st7789_of_match,
},
};
module_spi_driver(st7789_spi_driver);
MODULE_AUTHOR("Your Name");
MODULE_DESCRIPTION("ST7789 LCD driver");
MODULE_LICENSE("GPL");
```
在该驱动程序中,使用了SPI传输函数`spi_sync_transfer()`来向ST7789芯片发送数据。同时,使用GPIO框架来控制ST7789芯片的引脚。在`st7789_probe()`函数中,初始化ST7789芯片,并使用`gpiochip_add()`函数添加GPIO设备。在`st7789_remove()`函数中,使用`gpiochip_remove()`函数移除GPIO设备。
需要根据实际情况进行修改和完善,同时注意驱动程序的兼容性和稳定性。