stm32+检测485连接状态
时间: 2023-08-22 19:41:06 浏览: 53
要检测485连接状态,可以通过以下步骤来实现:
1. 配置GPIO口控制485芯片的收发模式,将其设置为输出模式。
2. 在发送数据前,将GPIO口设置为发送模式,将数据发送出去。
3. 发送完成后,将GPIO口设置为接收模式,等待接收数据。
4. 在一段时间内能够成功接收到数据,则说明485连接正常。
5. 如果一段时间内未能接收到数据,则说明485连接异常。
以下是示例代码:
```c
// 定义收发模式GPIO口
#define RS485_MODE_GPIO_Port GPIOA
#define RS485_MODE_Pin GPIO_PIN_9
// 配置收发模式GPIO口为输出模式
HAL_GPIO_WritePin(RS485_MODE_GPIO_Port, RS485_MODE_Pin, GPIO_PIN_RESET);
GPIO_InitStruct.Pin = RS485_MODE_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(RS485_MODE_GPIO_Port, &GPIO_InitStruct);
// 发送数据
HAL_GPIO_WritePin(RS485_MODE_GPIO_Port, RS485_MODE_Pin, GPIO_PIN_SET);
HAL_UART_Transmit(&huart1, txData, txLen, 100);
// 切换为接收模式
HAL_GPIO_WritePin(RS485_MODE_GPIO_Port, RS485_MODE_Pin, GPIO_PIN_RESET);
HAL_UART_Receive_IT(&huart1, rxData, 10);
// 等待接收数据
uint32_t timeout = HAL_GetTick() + 100; // 等待100ms
while (HAL_GetTick() < timeout) {
if (rxComplete) {
// 成功接收到数据,485连接正常
break;
}
}
if (!rxComplete) {
// 485连接异常
}
```
注意,以上代码中使用了“中断接收”的方式,需要在主函数中实现以下中断处理函数:
```c
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) {
if (huart == &huart1) {
rxComplete = true;
}
}
```
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)