localip=`ifconfig | egrep -v "docker|127.0.0.1|192.168.122.1|172.17.0.1" | grep 'inet ' | awk '{print$2}' | egrep -o '([0-9]{1,3}\.){3}[0-9]{1,3}' | head -1`
时间: 2023-09-26 11:10:02 浏览: 45
这段代码是用于获取本地主机(host)的IP地址。具体解释如下:
1. `ifconfig`:执行`ifconfig`命令,显示网络接口配置信息。
2. `egrep -v "docker|127.0.0.1|192.168.122.1|172.17.0.1"`:使用正则表达式过滤掉包含 "docker"、"127.0.0.1"、"192.168.122.1"、"172.17.0.1" 的行。
3. `grep 'inet '`:筛选出包含 "inet " 的行,即包含IP地址的行。
4. `awk '{print$2}'`:使用`awk`命令提取出第二个字段,即IP地址。
5. `egrep -o '([0-9]{1,3}\.){3}[0-9]{1,3}'`:使用正则表达式匹配IP地址的模式,并只输出匹配的内容。
6. `head -1`:只获取匹配结果的第一行。
因此,这段代码的作用是在本地主机的网络接口配置信息中,过滤掉一些特定IP地址(如docker网桥、回环地址等),并获取第一个匹配的IP地址,将其赋值给变量 `localip`。
相关问题
如何将ESP8266WiFi模块连接到无线网络,并将其IP地址设置为192.168.4.1
以下是连接ESP8266WiFi模块到无线网络,并将其IP地址设置为192.168.4.1的基本步骤:
1. 首先,你需要将ESP8266WiFi模块连接到你的计算机,然后打开Arduino IDE并选择正确的开发板和端口。
2. 接下来,打开示例代码 “ESP8266WiFi” -> “WiFiScan” 并上传到开发板上。这将扫描可用的无线网络并显示它们的名称和信号强度。
3. 然后,打开示例代码 “ESP8266WiFi” -> “WiFiClient” 并将以下代码添加到setup函数中:
```
WiFi.begin("YOUR_SSID", "YOUR_PASSWORD");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
```
在这里,将“YOUR_SSID”和“YOUR_PASSWORD”替换为你的无线网络名称和密码。这将连接ESP8266WiFi模块到你的无线网络,并在串口监视器中显示其IP地址。
4. 最后,将以下代码添加到setup函数的末尾以将IP地址设置为192.168.4.1:
```
IPAddress ip(192, 168, 4, 1);
IPAddress gateway(192, 168, 4, 1);
IPAddress subnet(255, 255, 255, 0);
WiFi.softAPConfig(ip, gateway, subnet);
WiFi.softAP("ESP8266");
```
这将将ESP8266WiFi模块设置为一个访问点,并将其IP地址设置为192.168.4.1。
现在,你已经成功将ESP8266WiFi模块连接到无线网络,并将其IP地址设置为192.168.4.1。你可以通过访问该IP地址来管理ESP8266WiFi模块。
esp32 字符串数组为"192.168.1.10",arduino下连上wifi后将IP设为这个值
如果你已经有一个IP地址字符串数组"192.168.1.10",可以使用以下代码将其转换为IPAddress类型,并将ESP32的IP地址设为该值:
```cpp
#include <WiFi.h>
void setup() {
// Connect to WiFi
WiFi.begin("your_SSID", "your_PASSWORD");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
// Set IP address
char ipAddress[] = "192.168.1.10";
IPAddress ip;
if (ip.fromString(ipAddress)) {
IPAddress gateway(192, 168, 1, 1);
IPAddress subnet(255, 255, 255, 0);
WiFi.config(ip, gateway, subnet);
// Print ESP32 IP address
Serial.print("ESP32 IP address: ");
Serial.println(WiFi.localIP());
} else {
Serial.println("Invalid IP address!");
}
}
void loop() {
// Your code here
}
```
在这个例子中,我们首先连接到WiFi,并等待连接成功。然后,我们将IP地址字符串数组"192.168.1.10"转换为IPAddress类型,并检查其是否有效。如果有效,我们设置ESP32的IP地址为该值,网关为"192.168.1.1",子网掩码为"255.255.255.0"。最后,我们打印出ESP32的IP地址。如果IP地址无效,我们将打印"Invalid IP address!"。在实际使用时,你需要将"your_SSID"和"your_PASSWORD"替换为你的WiFi名称和密码。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)