stm32如何外接蜂鸣器
时间: 2023-09-13 22:07:47 浏览: 191
STM32可以通过GPIO输出来驱动蜂鸣器,具体步骤如下:
1.选择一个可用的GPIO口作为输出口,并将其配置为推挽输出模式。
2.将蜂鸣器连接到该GPIO口和GND。
3.在程序中通过设置GPIO输出电平的方式控制蜂鸣器的鸣叫。
下面是一个简单的代码示例:
```
#include "stm32f10x.h"
#define BEEP_GPIO_PORT GPIOC
#define BEEP_GPIO_PIN GPIO_Pin_9
void BEEP_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE); // 使能GPIOC时钟
GPIO_InitStructure.GPIO_Pin = BEEP_GPIO_PIN; // 配置PC.9为推挽输出
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(BEEP_GPIO_PORT, &GPIO_InitStructure);
}
int main(void)
{
BEEP_Init();
while(1)
{
GPIO_SetBits(BEEP_GPIO_PORT, BEEP_GPIO_PIN); // 输出高电平
Delay(500); // 延时500ms
GPIO_ResetBits(BEEP_GPIO_PORT, BEEP_GPIO_PIN); // 输出低电平
Delay(500); // 延时500ms
}
}
```
以上代码实现了每隔500ms蜂鸣器响一声的效果。其中,`BEEP_Init()`函数用于初始化GPIO口,`GPIO_SetBits()`函数用于将输出电平设置为高电平,`GPIO_ResetBits()`函数用于将输出电平设置为低电平。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)