stm32流水灯
时间: 2023-07-20 08:06:28 浏览: 63
STM32流水灯是一种常见的LED灯控制方式,可以通过STM32单片机的IO口实现。以下是一个简单的STM32流水灯程序示例:
```c
#include "stm32f10x.h"
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// 使能GPIOB外设时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
// 配置GPIOB的Pin5~8为推挽输出模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOB, &GPIO_InitStructure);
// 循环执行流水灯
while(1)
{
GPIO_SetBits(GPIOB, GPIO_Pin_5);
Delay(50000);
GPIO_ResetBits(GPIOB, GPIO_Pin_5);
GPIO_SetBits(GPIOB, GPIO_Pin_6);
Delay(50000);
GPIO_ResetBits(GPIOB, GPIO_Pin_6);
GPIO_SetBits(GPIOB, GPIO_Pin_7);
Delay(50000);
GPIO_ResetBits(GPIOB, GPIO_Pin_7);
GPIO_SetBits(GPIOB, GPIO_Pin_8);
Delay(50000);
GPIO_ResetBits(GPIOB, GPIO_Pin_8);
}
}
void Delay(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
```
在该示例中,首先通过RCC_APB2PeriphClockCmd函数使能GPIOB外设时钟,并配置GPIOB的Pin5~8为推挽输出模式。然后在循环中依次点亮GPIOB的Pin5~8,每隔一段时间后再将其熄灭,从而实现流水灯效果。最后通过Delay函数控制灯亮灭的时间。