字符串转ushort数组
时间: 2024-05-31 22:05:58 浏览: 22
字符串转ushort数组可以通过以下代码实现:
```python
string = "12345" # 假设字符串为 "12345"
ushort_array = [int(i) for i in string] # 转换成 ushort 数组
```
代码解释:
- 首先定义一个字符串 `string`,假设为 "12345"。
- 然后通过列表推导式将字符串中的每个字符转换成整数并存储到 `ushort_array` 数组中。
需要注意的是,这里的 `int()` 函数将字符转换为整数,如果需要将字符串转换为其他类型的数组,可以在列表推导式中使用相应的转换函数。
相关问题
c#将ushort转换为16进制byte
在 C# 中,可以使用 BitConverter.GetBytes 方法将 ushort 类型转换为 byte 数组,然后再将 byte 数组转换为 16 进制字符串。具体代码如下:
```csharp
ushort num = 12345;
byte[] bytes = BitConverter.GetBytes(num); // 将 ushort 转换为 byte 数组
string hex = BitConverter.ToString(bytes).Replace("-", ""); // 将 byte 数组转换为 16 进制字符串
```
其中,`BitConverter.GetBytes` 方法将 ushort 类型转换为 byte 数组,`BitConverter.ToString` 方法将 byte 数组转换为 16 进制字符串,`Replace` 方法用于去除字符串中的分隔符 `-`。
如果想要将 ushort 直接转换为 16 进制 byte 数组,可以使用 BitConverter.GetBytes 方法配合 LINQ 的 Select 方法,如下所示:
```csharp
ushort num = 12345;
byte[] bytes = BitConverter.GetBytes(num).Reverse().ToArray(); // 将 ushort 转换为 16 进制 byte 数组
string hex = BitConverter.ToString(bytes).Replace("-", ""); // 将 byte 数组转换为 16 进制字符串
```
其中,`Reverse` 方法用于反转 byte 数组的顺序,因为 BitConverter.GetBytes 方法返回的 byte 数组顺序与我们期望的顺序是相反的。
modbustcp可以读写字符串
Modbus TCP协议本身不支持直接读写字符串,但是可以通过拆分字符串成多个寄存器的方式实现字符串的读写。
具体实现方法如下:
1. 将字符串按照指定编码(如UTF-8)进行编码,得到字节数组。
2. 将字节数组拆分成多个16位的整数,作为寄存器的值写入设备。
3. 读取寄存器值时,将多个16位的整数进行合并,得到字节数组,然后将字节数组按照指定编码转换为字符串。
下面是一个示例代码,演示如何将字符串写入Modbus TCP设备的寄存器,并从设备的寄存器中读取字符串:
```
using System.Text;
using NModbus;
// 将字符串写入设备的寄存器
string str = "hello world";
byte[] bytes = Encoding.UTF8.GetBytes(str);
ushort[] registers = new ushort[bytes.Length / 2 + 1];
for (int i = 0; i < bytes.Length; i += 2)
{
registers[i / 2] = (ushort)(bytes[i] << 8 | bytes[i + 1]);
}
modbusMaster.WriteMultipleRegisters(1, 0, registers);
// 从设备的寄存器中读取字符串
ushort[] readRegisters = modbusMaster.ReadHoldingRegisters(1, 0, bytes.Length / 2 + 1);
byte[] readBytes = new byte[bytes.Length];
for (int i = 0; i < bytes.Length; i += 2)
{
readBytes[i] = (byte)(readRegisters[i / 2] >> 8);
readBytes[i + 1] = (byte)readRegisters[i / 2];
}
string readStr = Encoding.UTF8.GetString(readBytes);
```
上面的代码将字符串按照UTF-8编码写入设备的寄存器,然后从设备的寄存器中读取字符串并将其转换为字符串类型。