蓝牙BLE4.2支持多连接吗
时间: 2023-09-13 19:10:07 浏览: 79
蓝牙BLE 4.2 版本也支持多连接,但相比于 Bluetooth 5 版本,BLE 4.2 版本的多连接特性存在一些限制,例如最多只能支持两个连接,且连接的传输速率较慢。同时,在 BLE 4.2 版本中,只有一个连接可以处于活动状态,其余连接需要处于低功耗模式等待激活。因此,如果需要实现多连接功能,建议使用 Bluetooth 5 或更高版本的蓝牙技术。
相关问题
Ble蓝牙4.2协议传输完整用例
以下是一个简单的Ble蓝牙4.2协议传输完整用例:
1. 初始化设备并扫描周围的Ble设备。
2. 连接到所需的Ble设备。
3. 发现所需的服务和特征。
4. 启用所需的通知特征以接收数据。
5. 发送数据到写入特征。
6. 监听接收到的数据并进行处理。
7. 断开连接。
下面是一个示例代码片段:
```python
# 导入必要的模块和库
from bluepy.btle import Scanner, Peripheral, UUID
# 设置所需的UUID和地址
service_uuid = UUID("0000180f-0000-1000-8000-00805f9b34fb")
char_uuid = UUID("00002a19-0000-1000-8000-00805f9b34fb")
device_address = "00:11:22:33:44:55"
# 扫描设备
scanner = Scanner()
devices = scanner.scan(5.0)
for dev in devices:
if dev.addr == device_address:
# 连接到设备
device = Peripheral(device_address)
# 发现所需的服务和特征
service = device.getServiceByUUID(service_uuid)
characteristic = service.getCharacteristics(char_uuid)[0]
# 启用通知特征以接收数据
characteristic.write(b"\x01\x00")
while True:
# 监听接收到的数据并进行处理
if device.waitForNotifications(1.0):
continue
print("Waiting...")
# 断开连接
device.disconnect()
```
在上面的示例中,我们使用了Python的bluepy库来实现Ble蓝牙4.2协议传输完整用例。我们首先使用Scanner类扫描周围的设备,然后使用Peripheral类连接到所需的设备,并使用getServiceByUUID()和getCharacteristics()方法发现所需的服务和特征。接下来,我们使用write()方法启用通知特征以接收数据,并使用waitForNotifications()方法监听接收到的数据并进行处理。最后,我们使用disconnect()方法断开连接。
安卓向Ble蓝牙4.2协议设备传输数据完整用例
以下是一个简单的安卓向Ble蓝牙4.2协议设备传输数据完整用例:
1. 初始化Ble蓝牙适配器并检查设备是否支持Ble蓝牙。
2. 扫描周围的Ble设备并连接到所需的设备。
3. 发现所需的服务和特征。
4. 启用所需的通知特征以接收数据。
5. 发送数据到写入特征。
6. 监听接收到的数据并进行处理。
7. 断开连接。
下面是一个示例代码片段:
```java
// 导入必要的类和库
import android.bluetooth.BluetoothAdapter;
import android.bluetooth.BluetoothDevice;
import android.bluetooth.BluetoothGatt;
import android.bluetooth.BluetoothGattCallback;
import android.bluetooth.BluetoothGattCharacteristic;
import android.bluetooth.BluetoothGattService;
import android.bluetooth.BluetoothManager;
import android.content.Context;
import java.util.UUID;
// 初始化Ble蓝牙适配器并检查设备是否支持Ble蓝牙
final BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
final BluetoothAdapter bluetoothAdapter = bluetoothManager.getAdapter();
if (bluetoothAdapter == null || !bluetoothAdapter.isEnabled()) {
// 蓝牙不可用
return;
}
// 设置所需的UUID和地址
final UUID serviceUuid = UUID.fromString("0000180f-0000-1000-8000-00805f9b34fb");
final UUID charUuid = UUID.fromString("00002a19-0000-1000-8000-00805f9b34fb");
final String deviceAddress = "00:11:22:33:44:55";
// 扫描设备并连接到所需的设备
final BluetoothDevice device = bluetoothAdapter.getRemoteDevice(deviceAddress);
final BluetoothGatt gatt = device.connectGatt(this, false, new BluetoothGattCallback() {
@Override
public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) {
if (newState == BluetoothGatt.STATE_CONNECTED) {
// 连接成功后发现所需的服务和特征
gatt.discoverServices();
} else if (newState == BluetoothGatt.STATE_DISCONNECTED) {
// 断开连接
gatt.close();
}
}
@Override
public void onServicesDiscovered(BluetoothGatt gatt, int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
// 发现所需的服务和特征
final BluetoothGattService service = gatt.getService(serviceUuid);
final BluetoothGattCharacteristic characteristic = service.getCharacteristic(charUuid);
// 启用通知特征以接收数据
gatt.setCharacteristicNotification(characteristic, true);
final BluetoothGattDescriptor descriptor = characteristic.getDescriptor(UUID.fromString("00002902-0000-1000-8000-00805f9b34fb"));
descriptor.setValue(BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE);
gatt.writeDescriptor(descriptor);
// 发送数据到写入特征
characteristic.setValue("Hello, Ble!".getBytes());
gatt.writeCharacteristic(characteristic);
}
}
@Override
public void onCharacteristicChanged(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic) {
// 监听接收到的数据并进行处理
final byte[] data = characteristic.getValue();
final String message = new String(data);
System.out.println("Received message: " + message);
}
});
// 断开连接
gatt.disconnect();
```
在上面的示例中,我们使用了Java的Android SDK来实现安卓向Ble蓝牙4.2协议设备传输数据完整用例。我们首先使用BluetoothManager和BluetoothAdapter类初始化Ble蓝牙适配器并检查设备是否支持Ble蓝牙。接下来,我们使用BluetoothAdapter类扫描周围的设备,并使用connectGatt()方法连接到所需的设备。在连接成功后,我们使用discoverServices()方法发现所需的服务和特征,并使用setCharacteristicNotification()和writeDescriptor()方法启用通知特征以接收数据。接下来,我们使用setValue()和writeCharacteristic()方法发送数据到写入特征。最后,我们使用disconnect()方法断开连接。