stm32蜂鸣器程序代码
时间: 2023-09-20 18:03:41 浏览: 89
以下是一个简单的STM32蜂鸣器程序的代码示例:
```c
#include "stm32f10x.h"
// 定义蜂鸣器引脚
#define BUZZER_PIN GPIO_Pin_8
#define BUZZER_PORT GPIOB
// 函数声明
void Buzzer_Init(void);
void Buzzer_Beep(uint16_t frequency, uint16_t duration);
int main(void) {
// 初始化蜂鸣器
Buzzer_Init();
while (1) {
// 发出频率为 1000 Hz,持续时间为 500ms 的蜂鸣声
Buzzer_Beep(1000, 500);
}
}
// 蜂鸣器初始化函数
void Buzzer_Init(void) {
GPIO_InitTypeDef GPIO_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStruct.GPIO_Pin = BUZZER_PIN;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(BUZZER_PORT, &GPIO_InitStruct);
GPIO_SetBits(BUZZER_PORT, BUZZER_PIN);
}
// 发出蜂鸣声的函数
void Buzzer_Beep(uint16_t frequency, uint16_t duration) {
uint16_t period = 1000000 / frequency; // 计算周期
uint16_t half_period = period / 2; // 计算半周期
for (uint16_t i = 0; i < duration; i++) {
GPIO_ResetBits(BUZZER_PORT, BUZZER_PIN); // 输出低电平
for (uint16_t j = 0; j < half_period; j++); // 等待半个周期
GPIO_SetBits(BUZZER_PORT, BUZZER_PIN); // 输出高电平
for (uint16_t j = 0; j < half_period; j++); // 等待半个周期
}
}
```
这个程序使用STM32的GPIO模块控制蜂鸣器引脚的电平输出,并使用延时函数来产生特定频率和持续时间的蜂鸣声。你可以根据需要修改这个程序来适应不同的蜂鸣器。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)