dlt645 c程序
时间: 2023-12-11 17:03:17 浏览: 27
DLT645是一种通信协议,主要用于电能表的通信。以下是一个简单的DLT645的C程序示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
#define DEV_NAME "/dev/ttyUSB0" // 设备名称
int main() {
int fd = open(DEV_NAME, O_RDWR | O_NOCTTY);
if (fd < 0) {
perror("open");
exit(1);
}
struct termios oldtio, newtio;
tcgetattr(fd, &oldtio);
memset(&newtio, 0, sizeof(newtio));
// 配置串口参数
newtio.c_cflag = B9600 | CS8 | CLOCAL | CREAD;
newtio.c_iflag = IGNPAR;
newtio.c_oflag = 0;
newtio.c_lflag = 0;
newtio.c_cc[VTIME] = 0;
newtio.c_cc[VMIN] = 1;
tcflush(fd, TCIFLUSH);
tcsetattr(fd, TCSANOW, &newtio);
// 发送读取电能表数据的命令
unsigned char cmd[] = {0x68, 0x32, 0x00, 0x32, 0x00, 0x68, 0x11, 0x04, 0x33, 0x33, 0x33, 0x33, 0x01, 0x03, 0x33, 0x00, 0x16, 0x16};
write(fd, cmd, sizeof(cmd));
// 读取电能表数据的响应
unsigned char buf[1024];
int len = read(fd, buf, sizeof(buf));
if (len < 0) {
perror("read");
exit(1);
}
// 打印电能表数据
for (int i = 0; i < len; i++) {
printf("%02X ", buf[i]);
}
printf("\n");
close(fd);
return 0;
}
```
在上面的示例中,首先打开设备文件`/dev/ttyUSB0`,然后配置串口参数,接着向电能表发送读取数据的命令,并读取响应数据,最后打印数据。请注意,这只是一个简单的示例,具体的程序实现需要根据电能表的具体协议进行调整。