为什么/etc/ssh/sshd_config文件是空白
时间: 2023-10-07 13:14:00 浏览: 151
的?
/etc/ssh/sshd_config文件可能是空白的原因是因为该文件正在等待在系统或管理员进行更改。此文件是SSH服务器配置文件,包含了用于管理SSH服务器的一些配置选项。当管理员需要更改SSH服务器的配置信息时,他们可以通过编辑此文件来更改。因此,当管理员尚未编辑此文件时,它可能是空白的。
相关问题
怎么修改/etc/ssh/sshd_config文件。
可以使用任何文本编辑器来修改`/etc/ssh/sshd_config`。常见的文本编辑器有`nano`和`vim`。
使用`nano`编辑器:
1. 打开终端窗口。
2. 输入以下命令并按Enter键:`sudo nano /etc/ssh/sshd_config`
3. 输入管理员密码。
4. 使用箭头键和Page Up / Page Down键浏览文件。
5. 找到要修改的行并进行编辑。
6. 按Ctrl + X,然后按Y键保存更改。
7. 按Enter键确认文件名并退出。
使用`vim`编辑器:
1. 打开终端窗口。
2. 输入以下命令并按Enter键:`sudo vim /etc/ssh/sshd_config`
3. 输入管理员密码。
4. 按i键进入编辑模式。
5. 使用箭头键和Page Up / Page Down键浏览文件。
6. 找到要修改的行并进行编辑。
7. 按Esc键退出编辑模式。
8. 输入:wq并按Enter键保存更改并退出。
逐条注释 ``` if grep -q "Protocol" /etc/ssh/sshd_config then sed -i '/Protocol/s/^#//' /etc/ssh/sshd_config sed -i "s/Protocol.*/Protocol 2/g" /etc/ssh/sshd_config else echo 'Protocol 2' >> /etc/ssh/sshd_config fi if grep -q "PrintMotd" /etc/ssh/sshd_config then sed -i '/PrintMotd/s/^#//' /etc/ssh/sshd_config sed -i "s/PrintMotd.*/PrintMotd yes/g" /etc/ssh/sshd_config else echo "PrintMotd yes" >> /etc/ssh/sshd_config fi service sshd restart systemctl restart sshd.service ```
这段脚本的作用是修改/etc/ssh/sshd_config文件中的SSH配置,并重新启动SSH服务。具体解释如下:
```shell
if grep -q "Protocol" /etc/ssh/sshd_config
then
sed -i '/Protocol/s/^#//' /etc/ssh/sshd_config
sed -i "s/Protocol.*/Protocol 2/g" /etc/ssh/sshd_config
else
echo 'Protocol 2' >> /etc/ssh/sshd_config
fi
```
- 检查/etc/ssh/sshd_config文件中是否存在"Protocol"这一行。
- 如果存在,则使用sed命令将该行的行首的注释符号#去掉,即取消注释。
- 然后使用sed命令将该行的值修改为"Protocol 2",即设置SSH协议版本为2。
- 如果不存在,则在文件末尾添加一行"Protocol 2"。
```shell
if grep -q "PrintMotd" /etc/ssh/sshd_config
then
sed -i '/PrintMotd/s/^#//' /etc/ssh/sshd_config
sed -i "s/PrintMotd.*/PrintMotd yes/g" /etc/ssh/sshd_config
else
echo "PrintMotd yes" >> /etc/ssh/sshd_config
fi
```
- 检查/etc/ssh/sshd_config文件中是否存在"PrintMotd"这一行。
- 如果存在,则使用sed命令将该行的行首的注释符号#去掉,即取消注释。
- 然后使用sed命令将该行的值修改为"PrintMotd yes",即启用SSH登录时显示欢迎信息。
- 如果不存在,则在文件末尾添加一行"PrintMotd yes"。
```shell
service sshd restart
systemctl restart sshd.service
```
- 重新启动SSH服务,使配置生效。这两行命令可能根据Linux发行版的不同而有所区别,用于重启SSH服务。