int I2cSimulateInit(I2cSimulateHandleType *hDev, const I2cSimulateConfigType* Config) { if(hDev==NULL) return RES_FAIL; if(Config==NULL) return RES_FAIL; hDev->Read = I2cSimulateRead; hDev->Write = I2cSimulateWrite; hDev->isBusy = 0; hDev->Delay = SystemCoreClock/2/Config->nClock; hDev->Bus.Scl = Config->busScl; hDev->Bus.Sda = Config->busSda; I2cSimulBusInit(hDev); return RES_OK; }
时间: 2024-04-14 15:31:20 浏览: 20
这段代码是用于初始化I2C模拟设备的函数。函数的输入参数包括一个指向I2C模拟设备句柄的指针(hDev)和一个指向I2C模拟配置的结构体指针(Config)。函数返回一个整数表示初始化结果。
函数首先检查传入的设备句柄和配置指针是否为空,如果为空,则返回RES_FAIL表示初始化失败。
接着,函数设置设备句柄的读取和写入函数指针为I2cSimulateRead和I2cSimulateWrite。然后将isBusy标志位初始化为0,根据配置结构体设置延时时间(Delay),以及设置总线引脚(Scl和Sda)。
最后,调用I2cSimulBusInit函数进行总线的初始化。
函数返回RES_OK表示初始化成功,否则返回RES_FAIL表示初始化失败。
请问还有其他问题吗?
相关问题
int I2cSimulateWrite(I2cSimulateHandleType *hDev, uint8_t devAddr, uint8_t regAddr, char *ptr, int size) { int res; I2cSimulStart(hDev); res = I2cSimulWriteByte(hDev, devAddr&(~0x01)); if( !res ) { res = I2cSimulWriteByte(hDev, regAddr); if( !res ) { while(size--) { res = I2cSimulWriteByte(hDev, *ptr++); if( res ) break; } } } I2cSimulStop(hDev); return res; }
这段代码是用于模拟I2C通信写操作的函数。函数的输入参数包括一个指向I2C设备句柄的指针(hDev),设备地址(devAddr),寄存器地址(regAddr),数据指针(ptr),以及数据大小(size)。函数返回一个整数表示操作的结果。
函数首先调用I2cSimulStart函数启动I2C模拟通信。然后使用I2cSimulWriteByte函数向设备地址发送写命令,并检查返回值是否为0。如果返回值为0,表示发送成功,则继续使用I2cSimulWriteByte函数向寄存器地址发送数据,并检查返回值是否为0。如果发送寄存器地址成功,就进入一个循环,使用I2cSimulWriteByte函数连续写入数据,直到写入完成或者出现错误。
最后,调用I2cSimulStop函数停止I2C模拟通信,并返回操作结果。
请问还有其他问题吗?
/** * @brief 读 * @param * @return NO */ int I2cSimulateRead(I2cSimulateHandleType *hDev, uint8_t devAddr, uint8_t regAddr, char *ptr, int size) { int res; I2cSimulStart(hDev); res = I2cSimulWriteByte(hDev, devAddr&(~0x01)); if( !res ) { res = I2cSimulWriteByte(hDev, regAddr); if( !res ) { I2cSimulStart(hDev); res = I2cSimulWriteByte(hDev, devAddr|0x01); if( !res ) { while(size--) { *ptr = I2cSimulReadByte(hDev, size); ptr++; } } } } I2cSimulStop(hDev); return res; }
这段代码是用来进行读操作的。函数名为I2cSimulateRead,它接受一个I2cSimulateHandleType类型的指针hDev作为参数,以及devAddr、regAddr、ptr和size等参数。函数首先调用I2cSimulStart函数发送起始信号。然后调用I2cSimulWriteByte函数向设备地址发送写命令,并将返回值保存在res中。如果发送写命令成功,则继续发送寄存器地址,并将返回值保存在res中。接下来再次调用I2cSimulStart函数发送起始信号。然后调用I2cSimulWriteByte函数向设备地址发送读命令,并将返回值保存在res中。如果发送读命令成功,则进入循环,每次调用I2cSimulReadByte函数读取一个字节的数据,并将其保存到ptr指向的内存中,然后指针ptr向后移动一位,直到读取完size个字节为止。最后调用I2cSimulStop函数发送停止信号。整个过程就是模拟了I2C总线上的读操作,并将结果保存在res中,最后将res作为函数的返回值。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)