stm32的adc配置代码
时间: 2023-09-11 08:06:25 浏览: 37
以下是一个基本的STM32 ADC配置代码示例:
首先需要在头文件中引入相应的库:
```c
#include "stm32f10x.h"
#include "stm32f10x_adc.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
```
然后初始化GPIO口和ADC:
```c
// 定义ADC结构体
ADC_InitTypeDef ADC_InitStructure;
// 定义GPIO结构体
GPIO_InitTypeDef GPIO_InitStructure;
// 使能相应的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_ADC1, ENABLE);
// 配置GPIO口为模拟输入
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置ADC
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
// 使能ADC1
ADC_Cmd(ADC1, ENABLE);
```
在读取ADC数据之前,需要对ADC进行校准和配置:
```c
// 校准ADC
ADC_ResetCalibration(ADC1);
while(ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while(ADC_GetCalibrationStatus(ADC1));
// 配置ADC
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_239Cycles5);
```
最后,读取ADC数据:
```c
// 启动ADC转换
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
// 等待转换完成
while(ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET);
// 读取转换结果
uint16_t adc_value = ADC_GetConversionValue(ADC1);
```