AT+CSCS=\"GSM\"\r\n

AT+CSCS=\"GSM\"\r\n是一条AT指令，用于设置GSM模块的字符集。AT指令是一种通信协议，用于与移动设备进行通信和控制。AT+CSCS指令用于设置字符集，\"GSM\"表示使用GSM字符集。

GSM字符集是一种标准的字符编码方式，用于在GSM网络中传输文本消息。它支持大部分常见的ASCII字符和一些特殊字符。通过设置AT+CSCS=\"GSM\"，可以确保GSM模块正确地解析和处理接收到的文本消息。

相关问题

if(ret == 0) { return AT_CSCS_ERROR; } ret = UART1_Send_AT_Command("AT+CMGS=\"18759493018\"",">",3,50);

if(ret == 0) { return AT_CSCS_ERROR; }
// If the previous command (AT+CSCS) did not return success, return an error code
// indicating that there was an error with the character set.

ret = UART1_Send_AT_Command("AT CMGS=\"18759493018\"",">",3,50);
// Send the AT command to send an SMS message to the phone number "18759493018".
// Wait for a '>' character response from the modem, with a timeout of 50 milliseconds
// and a maximum of 3 retries.

// If the command was successful, ret will be set to a non-zero value.
// If there was an error, ret will be set to 0.

void SIM900A_Init(void) { USART_InitTypeDef USART_InitStructure; GPIO_InitTypeDef GPIO_InitStructure; RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE); // 配置USART1的GPIO GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOA, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; GPIO_Init(GPIOA, &GPIO_InitStructure); // 配置USART1 USART_InitStructure.USART_BaudRate = 9600; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity_No; USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; USART_Init(USART1, &USART_InitStructure); USART_Cmd(USART1, ENABLE); // 等待SIM900A模块启动 delay_ms(5000); } void SIM900A_SendCommand(char* command) { while(*command) { USART_SendData(SIM900A_USART, *command++); while(USART_GetFlagStatus(SIM900A_USART, USART_FLAG_TC) == RESET); } } void SIM900A_SendSMS(char* phoneNumber, char* message) { SIM900A_SendCommand("AT+CMGF=1"); // 设置短信格式为文本模式 SIM900A_SendCommand("AT+CMGS=\"+86"); // 设置手机号码 SIM900A_SendCommand(phoneNumber); SIM900A_SendCommand("\""); SIM900A_SendCommand(message); // 发送短信内容 USART_SendData(SIM900A_USART, 0x1A); // 发送Ctrl+Z结束短信 while(USART_GetFlagStatus(SIM900A_USART, USART_FLAG_TC) == RESET); } void SIM900A_SendSMS_Chinese(char* phoneNumber, char* message) { char ucs2Message[200]; u8 i; u8 j; SIM900A_SendCommand("AT+CMGF=0"); // 设置短信格式为PDU模式 SIM900A_SendCommand("AT+CSCS=\"UCS2\""); // 设置字符集为UCS2 SIM900A_SendCommand("AT+CSMP=17,167,0,8"); // 设置短信参数 SIM900A_SendCommand("AT+CMGS=\"+86"); // 设置手机号码 SIM900A_SendCommand(phoneNumber); SIM900A_SendCommand("\""); for(i = 0, j = 0; i < strlen(message); i += 2, j += 4) { sprintf(&ucs2Message[j], "%02X%02X", message[i+1], message[i]); } ucs2Message[j] = '\0'; SIM900A_SendCommand(ucs2Message); // 发送短信内容 USART_SendData(SIM900A_USART, 0x1A); // 发送Ctrl+Z结束短信 while(USART_GetFlagStatus(SIM900A_USART, USART_FLAG_TC) == RESET); }

这段代码是用来控制 SIM900A 模块发送短信的，包括初始化、发送 ASCII 码短信、发送中文短信。其中 SIM900A_Init 函数用来初始化 USART1 和 SIM900A 模块，SIM900A_SendCommand 函数用来发送 AT 指令，SIM900A_SendSMS 函数用来发送 ASCII 码短信，SIM900A_SendSMS_Chinese 函数用来发送中文短信。