error: ‘p’ undeclared (first use in this function); did you mean ‘p2’? char *p2=(char *)p; // 定义一个指针变量p2,将P强制类型转换为char类型指针 ^
时间: 2024-02-22 09:55:02 浏览: 33
在这段代码中,出现了“error: ‘p’ undeclared”的错误,这是因为在将int类型指针P强制转换为char类型指针时,没有给char类型指针p2定义类型,导致编译器无法识别p2的类型。正确的代码应该是将P强制转换为char类型指针,并将其赋值给p2,如下所示:
```
char *p2 = (char *)P;
```
这样编译器就能正确识别p2的类型了。
相关问题
#include <stdio.h> int byte_order() { int num=1; int *P=# char *p2=(char *)p; return *p2; } int main() { if(byte_order() == 1) { printf("小端\n"); } else { printf("大端\n"); } system("pause"); return 0; }出现error: ‘p’ undeclared (first use in this function); did you mean ‘p2’? char *p2=(char *)p;
在这段代码中,出现了“error: ‘p’ undeclared”的错误,这是因为在将int类型指针P强制转换为char类型指针时,没有给char类型指针p2定义类型,导致编译器无法识别p2的类型。正确的代码应该是将P强制转换为char类型指针,并将其赋值给p2,如下所示:
```
char *p2 = (char *)P;
```
这样编译器就能正确识别p2的类型了。
上面那个问题报错 error: 'HSPI_HOST' undeclared (first use in this function); did you mean 'SPI3_HOST'?
非常抱歉,我的回答有误。在 ESP32-C3 上使用 esp-idf 4.3.5 时,HSPI_HOST 确实已经被移除了,你需要使用 SPI3_HOST 替代 HSPI_HOST。
你可以在代码中搜索 HSPI_HOST 并将其替换为 SPI3_HOST。如下所示:
```c
// 替换前
spi_bus_config_t buscfg={
.miso_io_num=PIN_NUM_MISO,
.mosi_io_num=PIN_NUM_MOSI,
.sclk_io_num=PIN_NUM_CLK,
.quadwp_io_num=-1,
.quadhd_io_num=-1,
.max_transfer_sz=PIN_NUM_CLK,
.flags=SPICOMMON_BUSFLAG_MASTER
};
spi_device_interface_config_t devcfg={
.clock_speed_hz=1000000,
.mode=0,
.spics_io_num=PIN_NUM_CS,
.queue_size=7,
.flags=SPI_DEVICE_NO_DUMMY
};
spi_device_handle_t spi;
// 替换后
spi_bus_config_t buscfg={
.miso_io_num=PIN_NUM_MISO,
.mosi_io_num=PIN_NUM_MOSI,
.sclk_io_num=PIN_NUM_CLK,
.quadwp_io_num=-1,
.quadhd_io_num=-1,
.max_transfer_sz=PIN_NUM_CLK,
.flags=SPICOMMON_BUSFLAG_MASTER
};
spi_device_interface_config_t devcfg={
.clock_speed_hz=1000000,
.mode=0,
.spics_io_num=PIN_NUM_CS,
.queue_size=7,
.flags=SPI_DEVICE_NO_DUMMY
};
spi_device_handle_t spi;
esp_err_t ret;
// 替换 HSPI_HOST 为 SPI3_HOST
ret=spi_bus_initialize(SPI3_HOST, &buscfg, 1);
ESP_ERROR_CHECK(ret);
ret=spi_bus_add_device(SPI3_HOST, &devcfg, &spi);
ESP_ERROR_CHECK(ret);
```
这样就可以解决 'HSPI_HOST' undeclared (first use in this function); did you mean 'SPI3_HOST'? 的问题了。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)