rk3568 dsi1 mipi屏设备树配置

以下是rk3568 dsi1 mipi屏设备树配置的示例：

&dsi {
    status = "okay";
    ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port@0 {
            reg = <0>;
            dsi_port: endpoint {
                remote-endpoint = <&panel_in>;
            };
        };
    };

    panel_in: endpoint@0 {
        remote-endpoint = <&dsi_port>;
        bus-width = <4>;
        data-lanes = <0 1 2 3>;
        clock-lanes = <4>;
        hsync-active = <0>;
        vsync-active = <0>;
        bit-mapping-format = <1>;
        fsl,data-mapping = "spwg";
        fsl,data-enable-active = <0>;
        fsl,data-enable-inactive = <1>;
        fsl,de-active = <0>;
        fsl,de-inactive = <1>;
        fsl,hsa-active = <0>;
        fsl,hsa-inactive = <1>;
        fsl,hbp-active = <0>;
        fsl,hbp-inactive = <1>;
        fsl,hline-byte = <656>;
        fsl,vsa-active = <0>;
        fsl,vsa-inactive = <1>;
        fsl,vbp-active = <0>;
        fsl,vbp-inactive = <1>;
        fsl,vfp-active = <0>;
        fsl,vfp-inactive = <1>;
        fsl,vactive-byte = <2720>;
        fsl,pixel-format = <0x18>;
        fsl,video-mode = <0>;
        fsl,dsi-bta-enable = <0>;
        fsl,bta-hsaprepare = <0>;
        fsl,bta-lp = <0>;
    };
};

请注意，这只是示例设备树配置，具体配置取决于你使用的具体硬件。