['#define', 'CMD_WEFVSR', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 'U8', '0x50', '\n'] python 去掉里面的''
时间: 2024-06-17 07:01:34 浏览: 12
`#define` 是预处理器指令,在 C 语言和 C++ 中用来定义常量或宏,它们在编译阶段展开到程序中。在这个例子中,`CMD_WEFVSR` 可能是一个命令标识符,后面的空格和特定字符序列如 `U8` 和 `0x50` 可能是某种格式定义或者字节值。
Python 中没有直接的 `#define` 关键字,因为 Python 是解释型语言,不需要预处理器。如果你想要在 Python 中处理类似这样的文本字符串,你可以使用字符串切片或者正则表达式来移除空格。例如:
```python
input_str = ['#define', 'CMD_WEFVSR', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 'U8', '0x50', '\n']
output_str = ''.join(input_str[0:2] + input_str[4:-1]) # 移除空格
# 或者使用正则表达式(如果字符串里有其他特殊字符)
import re
output_str = re.sub(r'\s+', '', input_str) # 移除所有连续的空格
print(output_str)
```
如果你想在 Python 中保留 `U8` 和 `0x50` 这样的部分,但删除所有空格,输出将是 `CMD_WEFVSRU80x50\n`。
相关问题
void LCD_Init(void) { #ifdef myICON u8 i; #endif RCC->APB2ENR |= 1<<3;//使能PORTB时钟 GPIOB->CRH &= 0X0000FFFF; GPIOB->CRH |= 0X33330000;//PB12-15推挽输出 GPIOB->ODR |= 0XFF000000; GPIOB->CRH &= 0XFFFFFF00;//PB8、9推挽输出 GPIOB->CRH |= 0X00000033; GPIOB->ODR |= (1<<8|1<<9); delay_us(1000); LCD_WrCmd(0x33); LCD_WrCmd(0x32); LCD_WrCmd(0x28); LCD_WrCmd(0x0c); LCD_WrCmd(0x06);//写一个指针加1 LCD_WrCmd(0x01); LCD_WrCmd(0x80);这段代码在STM32系统中可以用吗?
这段代码是针对某种型号的单片机编写的,其中使用了单片机的GPIO控制寄存器进行操作。如果要在STM32系统中使用,需要根据具体的芯片型号和开发板类型,修改相应的GPIO控制寄存器地址和位定义。比如,如果要在STM32F103C8T6开发板上控制LCD,可以使用以下代码作为参考:
```c
#include "stm32f10x.h"
#include "delay.h"
// 定义LCD引脚对应的GPIO端口和引脚编号
#define LCD_RS_GPIO_PORT GPIOB
#define LCD_RS_GPIO_PIN GPIO_Pin_12
#define LCD_EN_GPIO_PORT GPIOB
#define LCD_EN_GPIO_PIN GPIO_Pin_13
#define LCD_D4_GPIO_PORT GPIOB
#define LCD_D4_GPIO_PIN GPIO_Pin_14
#define LCD_D5_GPIO_PORT GPIOB
#define LCD_D5_GPIO_PIN GPIO_Pin_15
#define LCD_D6_GPIO_PORT GPIOB
#define LCD_D6_GPIO_PIN GPIO_Pin_8
#define LCD_D7_GPIO_PORT GPIOB
#define LCD_D7_GPIO_PIN GPIO_Pin_9
// 定义LCD命令字
#define LCD_CMD_CLEAR 0x01
#define LCD_CMD_HOME 0x02
#define LCD_CMD_ENTRY_MODE 0x06
#define LCD_CMD_DISPLAY_ON 0x0C
#define LCD_CMD_FUNC_SET 0x28
#define LCD_CMD_SET_CGRAM 0x40
#define LCD_CMD_SET_DDRAM 0x80
// LCD写入命令函数
void LCD_WriteCmd(uint8_t cmd) {
// 设置RS引脚为0,表示写入命令
GPIO_ResetBits(LCD_RS_GPIO_PORT, LCD_RS_GPIO_PIN);
// 将命令字写入LCD数据总线
GPIO_WriteBit(LCD_D7_GPIO_PORT, LCD_D7_GPIO_PIN, (cmd & 0x80) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D6_GPIO_PORT, LCD_D6_GPIO_PIN, (cmd & 0x40) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D5_GPIO_PORT, LCD_D5_GPIO_PIN, (cmd & 0x20) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D4_GPIO_PORT, LCD_D4_GPIO_PIN, (cmd & 0x10) ? Bit_SET : Bit_RESET);
// 发送使能脉冲
GPIO_SetBits(LCD_EN_GPIO_PORT, LCD_EN_GPIO_PIN);
delay_us(2);
GPIO_ResetBits(LCD_EN_GPIO_PORT, LCD_EN_GPIO_PIN);
delay_us(2);
// 将低4位写入LCD数据总线
GPIO_WriteBit(LCD_D7_GPIO_PORT, LCD_D7_GPIO_PIN, (cmd & 0x08) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D6_GPIO_PORT, LCD_D6_GPIO_PIN, (cmd & 0x04) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D5_GPIO_PORT, LCD_D5_GPIO_PIN, (cmd & 0x02) ? Bit_SET : Bit_RESET);
GPIO_WriteBit(LCD_D4_GPIO_PORT, LCD_D4_GPIO_PIN, (cmd & 0x01) ? Bit_SET : Bit_RESET);
// 发送使能脉冲
GPIO_SetBits(LCD_EN_GPIO_PORT, LCD_EN_GPIO_PIN);
delay_us(2);
GPIO_ResetBits(LCD_EN_GPIO_PORT, LCD_EN_GPIO_PIN);
delay_us(2);
}
// LCD初始化函数
void LCD_Init(void) {
// 使能GPIOB时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
// 配置LCD引脚为推挽输出模式
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Pin = LCD_RS_GPIO_PIN | LCD_EN_GPIO_PIN | LCD_D4_GPIO_PIN | LCD_D5_GPIO_PIN | LCD_D6_GPIO_PIN | LCD_D7_GPIO_PIN;
GPIO_Init(LCD_RS_GPIO_PORT, &GPIO_InitStructure);
// 初始化LCD
LCD_WriteCmd(LCD_CMD_FUNC_SET);
delay_ms(5);
LCD_WriteCmd(LCD_CMD_FUNC_SET);
delay_us(150);
LCD_WriteCmd(LCD_CMD_FUNC_SET);
delay_us(150);
LCD_WriteCmd(LCD_CMD_FUNC_SET);
LCD_WriteCmd(LCD_CMD_ENTRY_MODE);
LCD_WriteCmd(LCD_CMD_DISPLAY_ON);
LCD_WriteCmd(LCD_CMD_CLEAR);
}
```
需要注意的是,在STM32系统中,需要使用对应的头文件和库函数,如上例中的`stm32f10x.h`和`delay.h`,以及相应的GPIO配置和控制函数,如`GPIO_Init()`和`GPIO_WriteBit()`等。
在Linux内核驱动中,构建一个结构体指针数组,其中存放的是定义如下的结构体struct msg { u16 module_id; u16 cmd_id; u16 cmd_subid; u16 complete; u8 data[128]; };,请你给出操作这个结构体指针数组的功能函数,分别为:初始化,加入数组,出数组等;再写两个函数,函数一构建msg,除msg中的data数组外,其他成员赋值为常数,并将两个unsigned int 类型的值使用移位的方式放入data数组中,并向数组中放置msg,使用usleep_range()函数等待函数二将msg的complete成员设置为1后,再退出函数;函数二将msg从队列中取出来,解析msg中的module_id,如果该值不为0x1,则报错,否则使用switch函数解析cmd_id,并根据不同的cmd_id再解析cmd_subid,将msg内data数组中放入的两个unsigned int值还原,并将其作为两个参数用在下列函数前两个参数中,static unsigned int phytuart_msg_cmd_set_txim(unsigned int im, unsigned int txim, struct pokemon_uart_port *pup) { if (txim == 0) { im &= ~REG_IMSC_TXIM; pokemon_uart_write(im, pup, REG_IMSC); } else{ im |= REG_IMSC_TXIM; pokemon_uart_write(im, pup, REG_IMSC); } return im; }并将msg中的complete成员设置为1,函数一和函数二需要使用队列的操作函数,注意函数一中将msg放进数组后,需要调用函数二解析,请给出详细代码
以下是操作结构体指针数组的功能函数:
```c
#define MAX_MSG_ARRAY_SIZE 100
struct msg *msg_array[MAX_MSG_ARRAY_SIZE];
int msg_array_tail = 0;
void init_msg_array() {
int i;
for (i = 0; i < MAX_MSG_ARRAY_SIZE; i++) {
msg_array[i] = NULL;
}
msg_array_tail = 0;
}
int add_msg_to_array(struct msg *msg) {
if (msg_array_tail >= MAX_MSG_ARRAY_SIZE) {
return -1;
}
msg_array[msg_array_tail++] = msg;
return 0;
}
struct msg *get_msg_from_array() {
if (msg_array_tail <= 0) {
return NULL;
}
struct msg *msg = msg_array[0];
int i;
for (i = 1; i < msg_array_tail; i++) {
msg_array[i - 1] = msg_array[i];
}
msg_array[msg_array_tail - 1] = NULL;
msg_array_tail--;
return msg;
}
```
以下是函数一和函数二的代码:
```c
#define MSG_DATA_SIZE 128
struct msg *build_msg(unsigned int module_id, unsigned int cmd_id, unsigned int cmd_subid) {
struct msg *msg = (struct msg *) kmalloc(sizeof(struct msg), GFP_KERNEL);
msg->module_id = module_id;
msg->cmd_id = cmd_id;
msg->cmd_subid = cmd_subid;
msg->complete = 0;
unsigned int *data = (unsigned int *) msg->data;
data[0] = (module_id << 16) | cmd_id;
data[1] = cmd_subid;
return msg;
}
void wait_for_complete(struct msg *msg) {
while (msg->complete == 0) {
usleep_range(10000, 11000);
}
}
void set_msg_complete(struct msg *msg) {
msg->complete = 1;
}
void handle_msg(struct msg *msg) {
if (msg->module_id != 0x1) {
printk(KERN_ERR "Invalid module id!\n");
return;
}
unsigned int *data = (unsigned int *) msg->data;
unsigned int cmd = data[0];
unsigned int cmd_subid = data[1];
struct pokemon_uart_port *pup = get_pokemon_uart_port();
unsigned int im = pup->im;
switch (cmd) {
case 0x100:
switch (cmd_subid) {
case 0x1:
im = phytuart_msg_cmd_set_txim(im, data[2], data[3], pup);
break;
// Other cmd_subid cases
}
break;
// Other cmd cases
}
pup->im = im;
set_msg_complete(msg);
}
```
需要注意的是,上述代码中的 `phytuart_msg_cmd_set_txim()` 函数并未给出,需要自行实现。另外,为了正确使用 `kmalloc()` 函数分配内存,需要在代码文件的开头包含 `<linux/slab.h>` 头文件。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)