MAX6675 和 STM32 的示例代码
时间: 2023-08-19 13:06:04 浏览: 48
下面是一个使用 MAX6675 和 STM32 的示例代码,用于读取热电偶的温度值:
```c
#include "stm32f4xx.h"
#include "spi.h"
#include "delay.h"
#define CS_PIN GPIO_Pin_4
#define CS_PORT GPIOA
// 初始化 SPI 接口
void SPI_Init(void) {
// 设置 SPI2 引脚
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource13, GPIO_AF_SPI2); // SCK
GPIO_PinAFConfig(GPIOB, GPIO_PinSource14, GPIO_AF_SPI2); // MISO
GPIO_PinAFConfig(GPIOB, GPIO_PinSource15, GPIO_AF_SPI2); // MOSI
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
GPIO_Init(GPIOB, &GPIO_InitStructure);
// SPI2 配置
SPI_InitTypeDef SPI_InitStructure;
SPI_I2S_DeInit(SPI2);
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init(SPI2, &SPI_InitStructure);
SPI_Cmd(SPI2, ENABLE);
}
// 初始化 GPIO 引脚
void GPIO_Init(void) {
GPIO_InitTypeDef GPIO_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = CS_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_Init(CS_PORT, &GPIO_InitStructure);
}
// 读取温度值
float MAX6675_ReadTemp(void) {
uint8_t buffer[2];
float temp;
GPIO_ResetBits(CS_PORT, CS_PIN); // 使能 CS
// 发送读取命令
SPI_I2S_SendData(SPI2, 0x00);
while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET) {}
buffer[0] = SPI_I2S_ReceiveData(SPI2);
// 读取温度值
SPI_I2S_SendData(SPI2, 0x00);
while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET) {}
buffer[1] = SPI_I2S_ReceiveData(SPI2);
GPIO_SetBits(CS_PORT, CS_PIN); // 禁用 CS
// 将接收到的数据转换为温度值
temp = (float)(((buffer[0] << 8) | buffer[1]) >> 3) * 0.25;
return temp;
}
int main(void) {
SPI_Init();
GPIO_Init();
while (1) {
float temperature = MAX6675_ReadTemp();
printf("温度值:%.2f°C\n", temperature);
delay_ms(1000); // 延时 1 秒
}
}
```
这段代码使用了 STM32 的 SPI 接口与 MAX6675 进行通信。在 `SPI_Init()` 函数中,我们初始化了 SPI2 的引脚和配置。在 `GPIO_Init()` 函数中,初始化了 CS 引脚。
`MAX6675_ReadTemp()` 函数用于读取 MAX6675 的温度值。它通过 SPI 接口向 MAX6675 发送读取命令,并从 SPI 接口接收温度值。最后,将接收到的数据转换为实际的温度值。
在 `main()` 函数中,我们不断读取温度值,并通过串口打印出来,然后延时 1 秒。
请注意,此示例代码仅供参考。你需要根据你的具体硬件和开发环境进行适当的修改和调整。
希望这个示例代码对你有帮助!如果有任何问题,请随时提问。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)