用arduino和esp8266写I2C作为从机的代码
时间: 2023-05-20 17:03:50 浏览: 112
非常感谢您的提问。以下是一个简单的示例代码,用于将ESP8266作为I2C从机连接到Arduino主机:
```
#include <Wire.h>
#define SLAVE_ADDRESS 0x08
void setup() {
Wire.begin(SLAVE_ADDRESS);
Wire.onReceive(receiveData);
Serial.begin(9600);
}
void loop() {
delay(100);
}
void receiveData(int byteCount) {
while (Wire.available()) {
char c = Wire.read();
Serial.print(c);
}
}
```
在这个示例中,我们使用Wire库来设置ESP8266作为I2C从机,并在收到数据时调用receiveData函数。在receiveData函数中,我们读取接收到的字节,并将它们打印到串口上。
希望这个示例能够帮助您开始使用ESP8266作为I2C从机。如果您有任何其他问题,请随时问我。
相关问题
用arduino和esp8266写I2C作为从机的发送和接受的代码
非常感谢您的提问。以下是使用Arduino和ESP8266编写I2C从机发送和接收数据的示例代码:
#include <Wire.h>
void setup() {
Wire.begin(0x08); // 从机地址为0x08
Wire.onReceive(receiveEvent); // 接收事件处理函数
Wire.onRequest(requestEvent); // 请求事件处理函数
}
void loop() {
delay(100);
}
void receiveEvent(int numBytes) {
while (Wire.available()) {
char c = Wire.read();
// 处理接收到的数据
}
}
void requestEvent() {
// 发送数据给主机
Wire.write("Hello World!");
}
请注意,这只是一个简单的示例代码,您需要根据您的具体需求进行修改和优化。希望对您有所帮助!
用arduino和esp8266编写I2C的代码
以下是一个简单的用Arduino和ESP8266编写I2C通信的代码示例:
```
#include <Wire.h>
#include <ESP8266WiFi.h>
const int I2C_SLAVE_ADDRESS = 0x12;
void setup() {
Wire.begin(I2C_SLAVE_ADDRESS);
Wire.onReceive(receiveEvent);
Serial.begin(9600);
WiFi.begin("SSID", "password");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi!");
}
void loop() {
// do nothing
}
void receiveEvent(int numBytes) {
while (Wire.available()) {
char c = Wire.read();
Serial.print(c);
}
}
```
这个代码示例使用Wire库来设置ESP8266作为I2C从设备,并在收到数据时打印出来。在setup()函数中,我们开始I2C通信,并注册一个回调函数receiveEvent()来处理接收到的数据。在loop()函数中,我们什么也不做,因为我们只是等待接收数据。